Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 272-047-7 | CAS number: 68650-79-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- June 25 - July 19, 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Justification for type of information:
- It is assessed from the methods of manufacture the starting materials and the similarity of the end product compositions that EC272-047-7 is sufficiently similar in all respects to EC800-353-8 that it is a sensible approach to use a read-across approach. A comparison of the two substances and a read-across justification can be found in section 13 of this dataset.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- Deviations:
- yes
- Remarks:
- Three soils were used intead of five. Justification is given elsewhere in the RSS
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.18 (Adsorption / Desorption Using a Batch Equilibrium Method)
- Principles of method if other than guideline:
- The number of soils used in this test deviated from the recommendation in OECD guideline 106 in that three soils were used instead of the recommended five soils. These deviations were based on results of earlier adsorption/ desorption tests with cationic surfactants. The partitioning to soil was not based on a Freundlich isotherm but was evaluated based on only one test concentration. The amines in the test substance will to a large extent be protonated under ambient conditions and will therefore interact with the negative surface of mineral particles or with negative charges of humic substances. The ionic interactions play a more important role than organic carbon content partitioning with organic matter. The log Koc was therefore considered as a poor predictor of the partitioning behaviour of the test substance in the environment, the determination of the Kd was also determined. The earlier results showed that using three soils, including at least one loamy sand and a clay soil, can give as much information as using the full number of soils. According to the Danish EPA (Influence of Sorption on the Degradation of Pesticides and other Chemicals in Soil, Danish EPA, 2004) a more reliable method of extrapolation to lower concentrations, was to use the data originating from the lowest measured concentration and to assume that the coefficient remained constant at lower concentrations. The test as described in this study plan was therefore performed using only one concentration which was as low as reasonably possible in relation to the detection limit.
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- batch equilibrium method
- Media:
- soil
- Radiolabelling:
- no
- Test temperature:
- Preliminary study: 19.8 to 20.3°C.
Definitive study: 19.1 to 24.1°C. - Analytical monitoring:
- yes
- Details on sampling:
- The adsorption study was performed for 24 hours in duplicate for each soil type. After shaking, the centrifuge tubes were removed from the shaker and centrifuged for 5 minutes at 3000 g. Samples of the supernatant were prepared and analyzed. The pH was measured in the supernatant before and after contact of the test substance with soil using pH indicator strips. After the adsorption time of 24 hours the supernatant was sampled, removed and replaced by 40 mL of 0.01 M CaCl2 solution. The desorption part of the study was performed for 48 hours. The pH was measured in the supernatant of the 48 hr desorption sample directly after sampling.
- Details on matrix:
- This test was performed with three soils, LUFA soil 2.2, LUFA soil 6S and Eurosoil no. 4 and each soil was tested in duplicate. The applied initial test substance concentration for LUFA soil 2.2 was 1000 µg/L, for LUFA soil 6S and Eurosoil no. 4 this concentration was 5000 µg/L. This was accomplished by adding 100 µL of a stock solution with a concentration of respective 400 mg/L (LUFA 2.2) and 2000 mg/L (LUFA 6S and Eurosoil no. 4) to 39.9 mL of 0.01 M CaCl2 solution.
The selected soils were air-dried at ambient temperature (between 20 and 25°C) and sieved to a particle size < or = to 2 mm. The moisture content of each soil was determined on three aliquots by heating at 105°C until constant weight.
LUFA standard soil 2.2
Name: LUFA standard soil 2.2
Location: Großer Striet no. 585 Hanhofen Germany
Sampling date: 29-07-2009
Texture: Loamy sand
pH (0.01M CaCl2) 5.5 ± 0.1
Organic carbon (%): 2.09 ± 0.40
Particle size distribution: %clay (< 2µm): 6.4 ± 0.9% silt (2 – 50 µm): 11.6 ± 0.7% sand (50 – 2000 µm): 82.0 ± 0.7
CEC (meq/100g): 10.0 ± 0.5
Water holding capacity (%): 46.5 ± 6.0
LUFA standard soil 6S
Name: LUFA standard soil 6S
Location: In der unteren Hohnert no. 2412 Siebeldingen Germany
Sampling date: 17-08-2009
Texture: Clay
pH (0.01M CaCl2): 7.2 ± 0.1
Organic carbon (%): 1.69 ± 0.17
Particle size distribution: %clay (< 2µm): 41.7 ± 1.3% silt (2 – 50 µm): 36.1 ± 2.2% sand (50 – 2000 µm): 22.2 ± 1.5
CEC (meq/100g): 22.0 ± 6.6
Water holding capacity (%): 39.6 ± 5.0
Eurosoil no. 4
Name: Eurosoil no.4, certified reference material IRMM 443-4
Location: Data can be obtained from IRMM
Sampling date: Data can be obtained from IRMM
Texture (USDA): Silt
pH (0.01M CaCl2): 6.8 ± 0.6
Organic carbon (%): 1.31
Particle size distribution: %clay (< 2µm): 20.3% silt (2 – 50 µm): 75.7% sand (50 – 2000 µm): 4.1
CEC (meq/100g): 17.3 - Type:
- Kd
- Value:
- 2 500
- Remarks on result:
- other: Lufa 2.2 soil
- Type:
- Kd
- Value:
- 4 500
- Remarks on result:
- other: Lufa 6S soil
- Type:
- Kd
- Value:
- 3 000
- Remarks on result:
- other: Eurosoil 4
- Adsorption and desorption constants:
- The equilibrium concentrations were measured to be between 32 – 184 µg/L for the different soil types by using an initial test substance concentration of 1000 µg/L for LUFA 2.2 and 5000 µg/L for LUFA 6S and Eurosoil 4. The observed adsorption parameters Kd and Koc values showed that the test substance adsorbed well to the tested soils. Moreover the values for Kdes were observed to be high. This means that the test substance was to a high percentage irreversible adsorbed to soil. pH values observed during the adsorption (24 hours) and desorption phase (48 hours) of the study were measured using a pH indicator stick and were found to be 7 for all samples.
- Recovery of test material:
- The recovery given by the mass balance, determined during the definitive test, did not meet the range of 70 to 110%. The applied extraction solution appeared not to be suitable for reliable extraction results. The final results of the Kd and Koc values have not been influenced by this.
- Validity criteria fulfilled:
- no
- Remarks:
- but without influence on results (see conclusions)
- Conclusions:
- The adsorption coefficient as expressed as the Kd of the test item was found to be in the range of 2500-4500 L/kg. This indicates that Amides, rape-oil, N-[3-(dimethylamino)propyl] will strongly adsorb to soils and sediments.
Quality criteria:
The recovery given by the mass balance, determined during the definitive test, did not meet the range of 70 to 110%. As the test substance was known to adhere easily to glass also an extraction of the glass vessel was determined. The amount of test substance extracted from the glass wall of the test vessel was very low. As the total recovery for the spiked aqueous sample was calculated from glass were reliable. Therefore, the test substance appeared to adsorb to a high percentage to soil and the used extraction solution was not suitable for reliable extraction results. The final results of the Kd and Koc values have not been influenced by this.
The temperature in the preliminary study varied from 19.8 to 20.3°C. In the definitive study the temperature varied from 19.1 to 24.1°C. During the preliminary test as well in the definitive test the temperatures varied outside the requirements of 20 - 25°C. - Executive summary:
The adsorption/desorption behaviour of Amides, rape-oil, N-[3-(dimethylamino)propyl] on soils was evaluated in a study performed in accordance with OECD testing guideline 106 and GLP requirements. At the test conditions the adsorption coefficient Kd was found to be in the range of 2500 to 4500 L/kg in the different soils tested. Consequently, the test substance is considered to be strongly sorptive to soil/sediment particles.
Reference
Description of key information
Due to the cationic surface-active properties will Amides, C18-unsatd., N-[3-(dimethylamino)propyl] adsorb strongly onto the solid phase of soil and sediments. The substance can adsorb both onto the organic fraction and, dependent on the chemical composition, onto the surface of the mineral phase, where sodium and potassium ions can be exchanged against the alkyl ammonium ion. The determination of a Koc from log Kow is not opportune, because the common equations for Koc derivation are not valid for both ionic and surface active substances. Therefore not the Koc values should be evaluated but the Kd values. Therefore the Kd values are reported and not the Koc values.
Kd values range from 2500 to 4500 L/kg with an average of 3300 L/kg.
Key value for chemical safety assessment
Other adsorption coefficients
- Type:
- log Kp (solids-water in soil)
- Value in L/kg:
- 3.5
Additional information
The adsorption/desorption behaviour of Amides, C18-unsatd., N-[3-(dimethylamino)propyl] on soils was evaluated in a study performed in accordance with OECD testing guideline 106 and GLP requirements. At the test conditions the adsorption coefficient Kd was found to be in the range of 2500 to 4500 L/kg in the different soils tested. Consequently, with an average of 3300 L/kg, the test substance is considered to be strongly sorptive to soil/sediment particles.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.