Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 695-755-1 | CAS number: 1229661-51-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Partition coefficient
Administrative data
Link to relevant study record(s)
- Endpoint:
- partition coefficient
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- from 2012-07-13 to 2012-10-08
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.8 (Partition Coefficient - HPLC Method)
- Deviations:
- no
- GLP compliance:
- no
- Type of method:
- HPLC method
- Partition coefficient type:
- octanol-water
- Analytical method:
- high-performance liquid chromatography
- Key result
- Type:
- log Pow
- Partition coefficient:
- 6.9
- Temp.:
- 20 °C
- pH:
- 7
- Details on results:
- The log Pow was determined to >6.5. It was extrapolated to be 6.9.
- Conclusions:
- The partition coefficient of the test item was estimated to be 6.9 at 20 °C.
- Executive summary:
A study was conducted in accordance with OECD TG 117 and Regulation (EC) No 440/2008 method A.8 to determine the partition coefficient of the test substance using the HPLC method. 10.9 mg of the test item were dissolved in 50 mL methanol and diluted from 0.1 mL to 1.75 mL with methanol / distilled water 40:60 % (v/v) and injected as single solutions twice. The solubility of the test item in water and n-octanol was preliminary determined and a partition coefficient log Pow > 1.7 was calculated. Using the HPLC method for the main test, the value found for the partition coefficients n-octanol/water was above the highest log Pow values of the calibration curve, therefore, it was determined to be >6.5. After extrapolation the log Pow for the test item was estimated to be 6.9.
Reference
Preliminary Visual Estimation of the Water Solubility
Different amounts of the test item and water were stirred at room temperature until the mixture appeared dissolved or the water solubility could be estimated to be below 10 mg/L.
Table 1. Appearance of the test mixture
Amount of the test item in mg |
Total volume in mL |
Appearance of mixture |
10.4 |
100 |
undissolved |
12.4 |
250 |
undissolved |
3.9 |
500 |
undissolved |
The solubility of the test item in water was below 7.8 mg/L.
Preliminary Visual Estimation of the n-Octanol Solubility
Different amounts of the test item were stirred with increasing amounts of n-octanol at room temperature and visually checked for any undissolved parts.
Table 2. Appearance of the test mixture
Amount of the test item in g |
Total amount of the test item in g |
Volume n-octanol (total volume) in mL |
Stirring time in min |
Appearance of mixture |
0.020 |
0.020 |
2 |
30 |
undissolved |
-- |
0.020 |
10 |
30 |
undissolved |
-- |
0.020 |
50 |
60 |
dissolved |
The solubility of the test item in n-octanol is higher than 0.40 g/L.
With the data obtained the partition coefficient was calculated as: log Pow > 1.7. Therefore, the partition coefficient n-octanol/water of the test item at room temperature was determined by the HPLC-method.
In addition the program kowwinnt (part of Episuite from SRC) was used to calculate the log Pow of the test item. The calculated value was 6.8 for the test item.
HPLC-Method
Table 3. Determination of the Dead Time t0
Dead time marker |
tR in min 1. measurement |
tR in min 2. measurement |
tR in min mean |
Formamide |
2.50 |
2.50 |
2.50 |
Table 4. Calibration data (*from OECD guideline 117, adopted 2004)
Calibration substance |
1. lnj. tR in min |
2. Inj. tR in min |
mean tR in min |
k |
log k |
log Pow |
2-Butanone |
2.99 |
2.98 |
2.98 |
0.19 |
-0.71 |
0.3 |
Acetanilide |
3.16 |
3.16 |
3.16 |
0.26 |
-0.58 |
1.0 |
Cinnamyl alcohol |
3.81 |
3.80 |
3.81 |
0.52 |
-0.28 |
1.9 |
2,6-Dicholoro- benzonitrile |
4.86 |
4.86 |
4.86 |
0.94 |
-0.03 |
2.6 |
Allyl phenyl ether |
7.04 |
7.04 |
7.04 |
1.82 |
0.26 |
2.9 |
Benzophenone |
6.35 |
6.35 |
6.35 |
1.54 |
0.19 |
3.2 |
Cumene |
13.0 |
13.1 |
13.1 |
4.22 |
0.63 |
3.7 |
Diphenyl ether |
11.9 |
12.0 |
12.0 |
3.79 |
0.58 |
4.2 |
l-Fluoranthene |
24.4 |
24.5 |
24.4 |
8.77 |
0.94 |
5.1 |
4,4' DDT |
61.1 |
61.3 |
61.2 |
23.5 |
1.37 |
6.5 |
Regression: logPow = a + b * logk
Parameters: a = 2.48, b = 2.78, r2 = 0.9811
Table 5. log Pow of the test item
|
1. Inj. tR in min |
2. Inj. tR in min |
mean tR in min |
k |
logk |
log Pow |
Test Item |
103.7 |
103.4 |
103.5 |
40.4 |
1.61 |
>6.5* (6.9)** |
* above the highest log Pow value of
calibration substances (DDT)
** via extrapolation
Description of key information
The partition coefficient of the test item was estimated to be 6.9 at 20 °C.
Key value for chemical safety assessment
- Log Kow (Log Pow):
- 6.9
- at the temperature of:
- 20 °C
Additional information
A study was conducted in accordance with OECD TG 117 and Regulation (EC) No 440/2008 method A.8 to determine the partition coefficient of the test substance using the HPLC method (reference 4.7-1). 10.9 mg of the test item were dissolved in 50 mL methanol and diluted from 0.1 mL to 1.75 mL with methanol / distilled water 40:60 % (v/v) and injected as single solutions twice. The solubility of the test item in water and n-octanol was preliminary determined and a partition coefficient log Pow > 1.7 was calculated. Using the HPLC method for the main test, the value found for the partition coefficients n-octanol/water was above the highest log Pow values of the calibration curve, therefore, it was determined to be >6.5. After extrapolation the log Pow for the test item was estimated to be 6.9.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.