Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 946-797-7 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Long-term toxicity to fish
Administrative data
Link to relevant study record(s)
- Endpoint:
- long-term toxicity to fish, other
- Remarks:
- ECOSAR for the prediction of the long-term toxicity to fish
- Type of information:
- (Q)SAR
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- accepted calculation method
- Remarks:
- The result was obtained by the valid qualitative application of an appropriate predictive method.
- Justification for type of information:
- See attached justification.
- Principles of method if other than guideline:
- The result was obtained using an appropriate QSAR method (see attached QMRF and QPRF for details).
- Duration:
- 30 d
- Dose descriptor:
- NOEC
- Effect conc.:
- 0.02 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- not specified
- Conclusions:
- A NOEC of ca. 0.020 mg/l in fish has been estimated, using an accepted calculation method. The result is considered to be reliable.
- Endpoint:
- fish short-term toxicity test on embryo and sac-fry stages
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2010-07-22 to 2010-10-20
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 210 (Fish, Early-Life Stage Toxicity Test)
- GLP compliance:
- yes (incl. QA statement)
- Analytical monitoring:
- yes
- Details on sampling:
- Prior to the start of the definitive exposure, samples from alternating replicates of each concentration and the dilution water control solutions were sampled and analyzed for the concentration of L3 present in each vessel. Results of these pretest analyses were used to judge whether sufficient quantities of test substance were being delivered and maintained in the exposure aquaria to initiate the early life-stage exposure.
During the in-life phase of the definitive study, samples were removed from alternate replicates (A/B/C/D) of each treatment level and control on days 0, 4, 13, 20, 27, 33, 35, 40, 47, 54, 61, 63, 68, 74, 76, 79, 82 and 90 for analysis of L3 concentration. The results for samples analyzed on days 33, 74 and 76 were not used due to issues associated with processing of samples. All test samples were removed from the approximate midpoint of each aquarium using a syphon.
Three quality control (QC) samples were prepared at each sampling interval and remained with the set of exposure solution samples through the analytical process. Results of the analyses of the QC samples were used to judge the precision and quality control maintained during the analysis of exposure solution samples. - Vehicle:
- yes
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION
- Concentrations: Based on the information provided by and in agreement with the Study Sponsor, nominal L3 concentrations of 2.1, 4.3, 8.5, 17 and 34 μg a.i./L were selected for the definitive early life-stage exposure. The reported water solubility for L3 is 34 μg/L.
- Stock solutions: A 2.0 mg a.i./mL diluter stock solution was prepared prior to exposure initiation and as needed during the study by placing 0.2001, g of L3 (0.2000 g as active ingredient) in a 100-mL volumetric flask and bringing it to volume with dimethylformamide (DMF, CAS No. 68-12-2). The resultant stock solution was observed to be clear and colourless.
A 560 μL/mL solvent stock solution was prepared by diluting 560 mL of DMF to a final volume of 1000 mL with deionized water. The resulting stock solution was observed to be clear and colourless.
- Diluter system: Prior to the pretest period, a Harvard Apparatus syringe pump in conjunction with a 100-mL Glenco® gas-tight syringe was calibrated to deliver 0.03298 mL/cycle of the 2.0 mg a.i./mL stock solution into the diluter system's chemical mixing chamber which also received 1.94 L of dilution water per cycle. The mixing chamber was positioned over a magnetic stir plate and was partially submerged within an ultrasonic water bath which aided in the solubilization of the test substance into the dilution water. The concentration of L3 in the solution contained within the mixing chamber was equivalent to that of the highest nominal test concentration (34 μg a.i./L) and was proportionally diluted (50%) to produce the remaining nominal test concentrations (17, 8.5, 4.3 and 2.1 μg a.i./L).
The concentration of DMF in the solution in the mixing chamber and the high test concentration constituted the highest DMF concentration (17 μL/L). An FMI pump was calibrated to deliver 0.166 mL/cycle of the 560 μL/mL solvent stock solution to 5.51 L of dilution water per cycle which was subsequently delivered to the solvent control vessels. The DMF concentration in the solvent control and the treatment levels was 17 μL/L, which was equal to that of the high test concentration.
A set of control vessels was also established which contained the same dilution water and was maintained under the same conditions as the treatment level vessels, but contained no L3 or solvent. - Test organisms (species):
- Oncorhynchus mykiss (previous name: Salmo gairdneri)
- Details on test organisms:
- TEST ORGANISM
- Common name: Rainbow Trout
- Source: The "green" rainbow trout eggs and sperm used during this study were obtained from TroutLodge, Inc., Sumner, WA, USA
- Test fish (age/length/weight, loading, pretreatment): Newly fertilized eggs (≤1 hr postfertilization)
- Treatment prior to exposure: The bags containing the eggs were received at a temperature of approximately 8 ºC and were warmed in a water bath to 10 ºC gradually over a one-hour period. Fertilization was achieved by adding cold fertilization buffer solution, consisting of 3.75 g/L glycine, 2.42 g/L TRIS and 5 g/L sodium chloride, to the bag containing the eggs. The bag was rocked gently back and forth a few times and then placed in a water bath at test temperature (approximately 10 ºC) for approximately 20 minutes. This procedure was used to rinse away any ovarian fluid sealing the eggs, preventing fertilization. Following the rinsing procedure, the eggs were removed from the water bath and most of the buffer solution was poured off. Sperm and an aliquot of buffer solution were added to the bag containing the eggs. The bag was then rocked gently back and forth and placed in a water bath for 20 minutes to complete the fertilization process. The sperm was then poured off of the eggs and the eggs were then gently rinsed of excess sperm using cold dilution water. The eggs were then placed in a stainless steel bowl containing cold dilution water and allowed to water-harden for approximately 30 minutes. During the water hardening period, the eggs were maintained at a temperature of 10 ºC.
The eggs were then impartially distributed to the egg incubation cups in the following manner: twenty-eight labelled egg incubation cups were set in a shallow water bath maintained at 10 ºC. The collected eggs were then counted into each egg cup, sequentially, five at a time, until each cup contained five eggs. This procedure was repeated until each egg cup contained 30 eggs. To initiate the exposure, the incubation cups, each containing 30 eggs, were then placed on the rocker arm apparatus in the respective exposure aquarium (one cup per replicate vessel). The eggs were approximately one hour old (post-fertilization) at exposure initiation. - Test type:
- flow-through
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 90 d
- Remarks on exposure duration:
- (approximately 6 weeks after controls were free-feeding)
- Hardness:
- 56 – 76 mg/L as CaCO3
- Test temperature:
- 8.8-10°C for embryo incubation period
11-13°C for larval growth period - pH:
- 6.6 –7.6
- Dissolved oxygen:
- 3.4 – 13 mg/L (31 - 107% of saturation)
Dissolved oxygen levels <60% saturation were not observed for >8 hours. - Salinity:
- Not applicable
- Nominal and measured concentrations:
- Nominal concentrations: 0 (Control), 0 (Solvent Control), 2.1, 4.3, 8.5, 17 and 34 μg/L
Time-weighted mean measured concentrations:
The results are interpreted with reference to time weighted mean measured concentrations - Details on test conditions:
- - Details of apparatus: The study was conducted using an exposure system consisting of an intermittent-flow proportional diluter, a temperature-controlled water bath and a set of 28 exposure aquaria. Flow-splitting cells were employed to equally distribute the solutions to the four replicate vessels at a rate of approximately 250 mL of test solution per vessel per cycle. Flow splitting accuracy of the diluter cells was within 5% of the nominal value. The test system was designed to provide five concentrations of the test substance, a solvent control and a dilution water control to four replicate aquaria.
The diluter system and exposure aquaria were fabricated of glass and silicone sealant. Each test aquarium measured 30 x 15 x 20 cm with a 14.5-cm high side drain that maintained a constant exposure solution volume of 6.5 L. Embryo incubation cups were round glass jars (5 cm) diameter, 8 cm high with 1000-micron mesh opening Nitex® screen bottoms. A rocker arm apparatus, driven by a 2 rpm electric motor was used to gently oscillate the incubation cups in the test solutions. Test aquaria were labelled to identify the treatment levels, control and designated replicate (A, B, C or D).
The exposure system was properly operating for at least 48 hours prior to exposure initiation to allow equilibration of the test substance in the diluter apparatus and exposure aquaria and to monitor the behaviour of the test substance over time.
Eggs were impartially distributed to the egg incubation cups in the following manner: twenty-eight labelled egg incubation cups were set in a shallow water bath maintained at 10 ºC. The collected eggs were then counted into each egg cup, sequentially, five at a time, until each cup contained five eggs. This procedure was repeated until each egg cup contained 30 eggs. To initiate the exposure, the incubation cups, each containing 30 eggs, were then placed on the rocker arm apparatus in the respective exposure aquarium (one cup per replicate vessel). The eggs were approximately one hour old (post-fertilization) at exposure initiation. After hatching the number of fish in each test vessel was reduce to 15.
- Feeding: Larvae were fed a diet consisting of live brine shrimp nauplii (Artemia salina) three times daily beginning on day 14 post-hatch, when the rainbow trout began to exhibit swim-up behaviour. At each feeding, larvae were fed ad libitum such that all larvae were afforded equal access to food. Larvae were not fed during the final 48 hours prior to test termination.
- Dilution water source: unadulterated well water. Hardness 50 – 86 mg/L as CaCO3, alkalinity 17 – 22 mg/L as CaCO3 and conductivity 360 – 630 μmhos/cm
- Test conditions: Test aquaria were impartially positioned in a water bath containing circulating water cooled by two Frigid Unit® 3/4-horsepower chillers which were designed to maintain the test solution temperature at 10 ± 2 ºC during the embryo incubation period and 12 ± 2 ºC during the larval grow out period. During the embryo incubation phase and larval development phase prior to the swim-up stage, the test area was maintained in continuous darkness. Once all larvae had reached the swim-up stage, a 16-hour light photoperiod at a light intensity range of 73 to 120 footcandles (790 to 1300 lux) and 8 hours darkness with a 30-minute transition period was provided at the exposure solutions' surface. Illumination was provided by Sylvania Octron® fluorescent lights centrally located above the test aquaria. Light intensity was measured with a VWR Traceable light meter. At the swim-up stage, screens were placed on the tops of the test aquaria to prevent the fish from escaping.
- Flow-through rate: The diluter delivered the control and test solutions to the exposure aquaria (97 L/aquarium/day) at a rate sufficient to provide approximately 15 aquarium volumes per 24-hour period, with a 90% replacement time of approximately three hours.
Observations: Due to the extreme sensitivity to physical trauma during the early developmental stage, dead eggs were not removed from the egg cups prior to reaching the "eyed" developmental stage of the exposure period. A definitive determination of viability was made on day 18, when all the eggs were passed the physically sensitive stage and exhibited well-pronounced embryonic development. Unfertilized eggs and dead eggs, characterized by an opaque, white colour, were removed after this time and preserved in Stockard's solution (an 85:6:5:4 mixture of water, glycerine, formalin, and glacial acetic acid), which also served to clear the eggs, enabling a determination of embryonic development. Any egg exhibiting embryonic development (up to and including day 18), whether dead or alive, was considered fertile for purposes of determining percent viability. All non-viable eggs were counted and discarded. Percent viability was based on the number of fertile embryos produced from the initial number of eggs exposed. The study continued by impartially selecting 15 live, viable embryos from each respective incubation cup and reassigning them into separate incubation cups which were suspended in the respective exposure aquaria. The larvae which hatched from these 15 isolated embryos were used to initiate the post-hatch phase of the exposure. The remaining viable embryos were placed in a second incubation cup and also suspended in the respective exposure aquaria. The remaining embryos were used to determine percent hatching success. This procedure assured unbiased thinning of larvae at the completion of hatch.
The day of hatch was defined as day 35, when no more than 10% unhatched viable embryos remained in any embryo incubation cup, thus initiating the 55-day post-hatch larval exposure, and providing a theoretical total of 15 larvae per replicate aquaria. The larvae from the second incubation cup were counted, euthanized with MS-222 (tricaine methane-sulfonate) and discarded. Calculations of hatching success of organisms were based on the number of live normal larvae per incubation cup after hatching was complete (day 35) compared to the number of embryos per cup on day 18 (thinning of eggs).
At 55 days post-hatch, the exposure was terminated. The surviving larvae in each replicate aquarium were euthanized with MS-222 (tricaine methanesulfonate), counted to determine larval survival, measured individually to determine the total length, and dried in an oven at 100 ºC for approximately 19 hours. Following the drying period, the larvae were individually weighed to determine dry weight. At termination, individual wet weights were also determined for the control larvae to determine biomass loading. The larvae were measured and weighed to the nearest 0.01 mm and 0.1 mg, respectively. The mean and standard deviation were calculated using individual measurements (total length and dry weight) for each replicate aquarium.
- Water quality: Dissolved oxygen concentration, pH and temperature were measured in all test vessels on test day 0 and in alternating replicates daily thereafter. Total hardness and total alkalinity as CaCO3, and specific conductance were measured on day 0 and weekly thereafter in alternating replicates of the low and high concentration and the dilution water control. - Reference substance (positive control):
- no
- Duration:
- 90 d
- Dose descriptor:
- NOEC
- Effect conc.:
- >= 27 µg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- test mat.
- Basis for effect:
- other: embryo survival, larval hatch and growth (length and dry weight)
- Duration:
- 90 d
- Dose descriptor:
- LOEC
- Effect conc.:
- > 27 µg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- test mat.
- Basis for effect:
- other: embryo survival, larval hatch and growth (length and dry weight)
- Details on results:
- - Biological observations: There were no treatment-related observations of sublethal effects.
- Mortality of controls: 6%
- Any observations, such as precipitation that might cause a difference between measured and nominal values: None - Reported statistics and error estimates:
- At the termination of the early life-stage exposure, data obtained on embryo hatching success, percent normal larvae at hatch, larval survival and larval growth (total length and dry weight) were statistically analyzed to establish treatment level effects. Analyses were performed using the mean organism response in each replicate aquarium rather than individual response values. All statistical analyses were conducted at the 95% level of certainty except in the case of the Bartlett's Test and Shapiro-Wilks' Test, in which the 99% level of certainty was applied.
- Validity criteria fulfilled:
- yes
- Conclusions:
- A NOEC of ≥27 μg/L has been determined in an early life stage test in which effects on embryo survival, larval hatch and growth (length and dry weight) of Oncorhynchus mykiss were evaluated over a 90-day period (including a period of approximately 6 weeks after controls were free-feeding). The results were obtained under flow-through test conditions and are expressed as time-weighted mean measured concentrations.
- Endpoint:
- fish early-life stage toxicity
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- The study was conducted according to an appropriate OECD test guideline method, and in compliance with GLP.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 210 (Fish, Early-Life Stage Toxicity Test)
- Version / remarks:
- (1992)
- GLP compliance:
- yes (incl. QA statement)
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: alternate replicates at each treatment level and in controls.
- Sampling method: sample removed from approximate midpoint of aquarium, using a pipette.
- Sample storage conditions before analysis: not reported - Vehicle:
- yes
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: diluter system using solvent stock (DMF)
- Differential loading: yes, proportional diluter system
- Controls: blank control and solvent control
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): dimethylformamide, CAS 68-12-2
- Concentration of vehicle in test medium (stock solution and final test solution(s) including control(s)): 1.0 ul/l
- Evidence of undissolved material (e.g. precipitate, surface film, etc): none - Test organisms (species):
- Oncorhynchus mykiss (previous name: Salmo gairdneri)
- Details on test organisms:
- TEST ORGANISM
- Common name: rainbow trout
- Source: Troutlodge Inc. (commercial supplier) - embryos and sperm obtained
METHOD FOR PREPARATION AND COLLECTION OF FERTILIZED EGGS
On the day of exposure initiation, two bags containing the unfertilized gametes were warmed in a water bath to 10 ºC gradually over a one-hour period. Fertilization was achieved by adding cold fertilization buffer solution, consisting of 3.75 g/L glycine, 2.42 g/L TRIS and 5 g/L sodium chloride, to the bag containing the embryos. The bag was rocked gently back and forth a few times and then placed in a water bath at test temperature (approximately 10 ºC) for approximately 30 minutes. This procedure was used to rinse away any ovarian fluid sealing the embryos, preventing fertilization. Following the rinsing procedure, the embryos were removed from the water bath and most of the buffer solution was poured off. Sperm and an aliquot of buffer solution were added to the bag containing the embryos. The bag was then rocked gently back and forth and placed in a water bath for 15 minutes to complete the fertilization process. The sperm was then poured off of the embryos and the embryos were then gently rinsed of excess sperm using cold dilution water. The embryos were then placed in a stainless steel bowl containing cold dilution water and allowed to water-harden for approximately 45 minutes. During the water hardening period, the eggs were maintained at a temperature of 10 ºC.
After the water hardening period, the embryos were then impartially distributed to the embryo incubation cups in the following manner: twenty-eight labelled embryo incubation cups were set in a shallow water bath maintained at 10 ºC. The embryos were then counted into each incubation cup, sequentially, five at a time, until each cup contained five embryos. This procedure was repeated until each embryo cup contained 30 embryos. To initiate the exposure, the incubation cups, each containing 30 embryos, were then placed on the rocker arm apparatus in the respective exposure aquarium (one cup per replicate vessel). The embryos were approximately one hour old (post-fertilization) at exposure initiation.
POST-HATCH FEEDING
- Start date: day 14 post-hatch
- Type/source of feed: live brine shrimp nauplii (Artemia salina)
- Amount given: ad libitum
- Frequency of feeding: three times daily - Test type:
- flow-through
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 92 d
- Remarks on exposure duration:
- (60 days post-hatch)
- Post exposure observation period:
- n/a
- Hardness:
- 20-24 mg/l as CaCO3
- Test temperature:
- 9.9-13 ºC
- pH:
- 6.8-8.0
- Dissolved oxygen:
- 67 - 130% saturation
- Salinity:
- n/a
- Nominal and measured concentrations:
- Nominal concentrations: 0.42, 0.84, 1.7, 3.4, 6.7 µg/l
Measured concentrations (time weighted mean): 0.52, 1.1, 1.8, 4.5, 7.9 µg/l - Details on test conditions:
- TEST SYSTEM
- Embryo cups (if used, type/material, size, fill volume): glass jars, 5 cm diameter x 8 cm height
- Test vessel: aquaria 30 * 15 * 20 cm made from glass and silicone sealant.
- Type (delete if not applicable): open / closed
- Material, size, headspace, fill volume: fill volume 6.5 l, headspace (calculated by reviewer) 2.5 l
- Aeration:
- Type of flow-through (e.g. peristaltic or proportional diluter): proportional diluter
- Renewal rate of test solution (frequency/flow rate): 90% replacement per 7 h (7.7 aquarium volumes per 24 h)
- No. of fertilized eggs/embryos per vessel: 15
- No. of vessels per concentration (replicates): 4
- No. of vessels per control (replicates): 4
- No. of vessels per vehicle control (replicates): 4
- Biomass loading rate: During the 92-day exposure period, biomass loading (based on control organism wet weight at test termination) did not exceed 0.2 g/L under the exposure's flow through conditions or 1.5 g/L at any time in any replicate exposure aquarium.
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: well water
- Total organic carbon: 0.1 - 0.44 mg/l
- Particulate matter:
- Metals: analysed but not presented
- Pesticides: analysed but not presented
- Chlorine: n/a
- Alkalinity: 56-76 mg/L as CaCO3
- Ca/mg ratio: n/a
- Conductivity: 290-420 µS/cm
- Salinity: n/a
- Culture medium different from test medium: no
- Intervals of water quality measurement: weekly
OTHER TEST CONDITIONS
- Adjustment of pH: not reported
- Photoperiod: 16 h/d once all larvae reached swim-up stage
- Light intensity: 680-1100 lux
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
VEHICLE CONTROL PERFORMED: yes
RANGE-FINDING STUDY PERFORMED: no
POST-HATCH DETAILS
- Begin of post-hatch period: day 32
- No. of hatched eggs (alevins)/treatment released to the test chamber: 15
- Release of alevins from incubation cups to test chamber on day no.: not reported
FERTILIZATION SUCCESS STUDY
- Number of eggs used: 30 embryos
- Removal of eggs to check the embryonic development on day no.: n/a - Reference substance (positive control):
- no
- Duration:
- 60 d
- Dose descriptor:
- NOEC
- Effect conc.:
- >= 7.9 µg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- test mat.
- Basis for effect:
- other: Hatching, larval survival, abnormal appearance and behaviour
- Remarks on result:
- other: This concentration represents the limit of solubility in the test medium.
- Details on results:
- - Mortality/survival at embryo, larval, juvenile, and adult stages: embryo hatching success 93-99%; live normal larvae at hatch 99-100%; larval survival 82-100%
- Days to hatch or time to release of young: hatch complete after 32 d
- Numbers hatched, Numbers of offspring produced, or Number of offspring per live female per day: embryo hatching success 93-99%
- Observations on body length and weight of young and/or exposed parents at one or more time periods: body length of young 43 - 45.3 mm; body weight of young 0.114-0.134 g (based on mean values per dose level, after 60 d post-hatch)
- Number of healthy fish at end of test: larval survival 82-100% after 60 d post-hatch
- Type of and number with morphological abnormalities: 1 live, deformed larva at an intermediate treatment level, not interpreted as significant.
- Type of and number with behavioural abnormalities: not reported
- Type and number of developmental effects: not reported
- Type and magnitude of hormonal changes: not reported
- Other biological observations: not reported
- Effect concentrations exceeding solubility of substance in test medium: no
- Incidents in the course of the test which might have influenced the results: none - Results with reference substance (positive control):
- n/a
- Validity criteria fulfilled:
- yes
- Remarks:
- Dissolved Oxygen exceeded the threshold of 60% ASV throughout the test; water temperature variation limited; analytical work appropriate; hatching success and post-hatch success in the controls and solvent controls exceeded the threshold of 75%.
- Conclusions:
- A 60-d (post-hatch) NOEC of ≥0.0079 mg/L (limit of solubility) was determined for effects (hatching, larval survival, abnormal appearance or behaviour) of decamethyltetrasiloxane (L4) in rainbow trout. This result was determined in a reliable study conducted according to an appropriate test protocol, and in compliance with GLP.
Referenceopen allclose all
Table 1. Test results
Nominal concentration (μg/L) |
Time-weighted mean measured concentration (μg/L)
|
Time-weighted mean measured concentration as % of nominal |
Embryo Survival (%)
|
Normal Larvae at Hatch (%) |
Larval Survival (%) |
Total Body Length (mm)
|
Dry Body Weight (g) |
0 (Control) |
- |
|
98 |
100 |
93 |
53.6 |
0.273 |
0 (Solvent control) |
- |
|
99 |
100 |
95 |
53.9 |
0.272 |
0 (Pooled control) |
- |
|
98 |
100 |
94 |
53.8 |
0.273 |
2.1 |
1.7 |
80 |
93 |
98 |
87 |
54.5 |
0.290 |
4.3 |
3.5 |
82 |
98 |
100 |
100 |
53.3 |
0.260 |
8.5 |
7.3 |
86 |
95 |
100 |
92 |
54.0 |
0.279 |
17 |
15 |
86 |
99 |
100 |
92 |
53.9 |
0.273 |
34 |
27 |
79 |
98 |
100 |
95 |
54.2 |
0.274 |
There were no statistically significant treatment-related effects
Table : Sub-lethal effect of L4 on rainbow trout
Treatment (mg/l) nominal (measured) concentration |
% deformed larvae |
|
Control (dilution water only) |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
Solvent control |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
0.42 mg/l |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
0.84 mg/ |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
1.7 mg/l |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
3.4 mg/l |
Replicate #1 |
1/30 = 3.3% |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
6.7 mg/l |
Replicate #1 |
0 |
Replicate #2 |
0 |
|
Replicate #3 |
0 |
|
Replicate #4 |
0 |
|
Replicate #4 |
0 |
Table : Effect of L4} on growth (mean±SD) of juvenile rainbow trout in the FELS test
Treatment concentration(unit) |
Growth - Length |
Growth - Dry Weight |
|||||
Measured |
Rep |
Mean per fish (mm) |
+SD |
Treatment Mean(mm) |
Mean per fish (mg) |
+SD |
Treatment Mean(mg) |
Dilution control |
A |
44.1 |
2.53 |
44.0 ± 0.63 |
0.125 |
0.0259 |
0.122 ± 0.0078 |
B |
44.1 |
2.09 |
0.124 |
0.0234 |
|||
C |
44.6 |
2.69 |
0.127 |
0.0255 |
|||
D |
43.1 |
1.47 |
0.110 |
0.0186 |
|||
Solvent control |
A |
46.2 |
2.23 |
44.1 ± 1.30 |
0.139 |
0.0294 |
0.124 ± 0.0105 |
B |
43.8 |
1.52 |
0.119 |
0.0179 |
|||
C |
43.7 |
2.44 |
0.124 |
0.0263 |
|||
D |
43.3 |
2.84 |
0.114 |
0.0352 |
|||
0.52 |
A |
42.7 |
3.67 |
43.6 ± 0.83 |
0.110 |
0.0376 |
0.123 ± 0.0093 |
B |
44.2 |
2.38 |
0.121 |
0.0221 |
|||
C |
44.3 |
2.20 |
0.131 |
0.0293 |
|||
D |
43.0 |
3.15 |
0.129 |
0.0414 |
|||
1.1 |
A |
45.2 |
3.27 |
45.3 ± 0.84 |
0.135 |
0.0280 |
0.134 ± 0.0162 |
B |
44.4 |
1.43 |
0.119 |
0.0145 |
|||
C |
46.5 |
2.07 |
0.157 |
0.0294 |
|||
D |
45.2 |
2.00 |
0.126 |
0.0150 |
|||
1.8 |
A |
44.5 |
5.34 |
43.6 ± 0.79 |
0.138 |
0.0444 |
0.124 ± 0.0107 |
B |
44.1 |
1.67 |
0.124 |
0.0142 |
|||
C |
43.1 |
1.87 |
0.113 |
0.0191 |
|||
D |
42.9 |
1.56 |
0.120 |
0.0184 |
|||
4.5 |
A |
43.6 |
1.99 |
43.7 ± 0.44 |
0.122 |
0.0215 |
0.121 ± 0.0069 |
B |
43.2 |
1.15 |
0.112 |
0.0121 |
|||
C |
44.3 |
1.69 |
0.129 |
0.0207 |
|||
D |
43.6 |
3.15 |
0.120 |
0.0350 |
|||
7.9 |
A |
43.1 |
2.16 |
43.0 ± 0.71 |
0.115 |
0.0205 |
0.114 ± 0.0038 |
B |
43.5 |
1.61 |
0.119 |
0.0211 |
|||
C |
42.0 |
2.60 |
0.110 |
0.0264 |
|||
D |
43.5 |
2.30 |
0.113 |
0.0255 |
Description of key information
HMDS: Long-term toxicity to fish: NOEC range 20 µg/l (QSAR for HMDS) - ≥27 µg/l (taken as an indicative value from the surrogate substance L3, octamethyltrisiloxane, in which no effects were observed at this loading which represented the limit of solubility in test media).
L3: Long-term toxicity to fish: 90-d NOEC ≥27 μg/l (measured, highest concentration tested) embryo survival, larval hatch and growth (length and dry weight), Oncorhynchus mykiss (OECD 210).
L4: Long-term toxicity to fish: 60-d post-hatch NOEC ≥7.9 µg/l (time weighted mean measured) (highest concentration tested) (OECD 210), based on hatching, larval survival, abnormal appearance and behaviour in Oncorhynchus mykiss.
L5: Long-term toxicity to fish: 60-d post-hatch NOEC ≥7.9 µg/l (time weighted mean measured) (highest concentration tested) (OECD 210), based on hatching, larval survival, abnormal appearance and behaviour in Oncorhynchus mykiss, read-across from an analogous/structurally related substance, L4 (decamethyltetrasiloxane, CAS 141-62-8).
Key value for chemical safety assessment
Additional information
Constituent HMDS
A 90-day read-across NOEC of ≥27 µg/l (0.027 mg/l) has been determined for the effects of the surrogate substance octamethyltrisiloxane (L3) on embryo survival, larval hatch and growth (length and dry weight) of Oncorhynchus mykiss. The results were obtained from an early-life stage: reproduction, (sub)lethal effects flow-through test, conducted in accordance with OECD Guideline 210. In the tested substance, no effects were observed at the limit of solubility. The limit of solubility of HMDS is considerably higher, so the NOEC is read across as an indicative value.
An estimated chronic NOEC of 0.020 mg/l for fish for HMDS is available using a reliable QSAR method. The method has been validated for use with volatile methyl siloxanes such as HMDS and is considered to be reliable (see QMRF/QPRF attached to the IUCLID dataset; Peter Fisk Associates 2018).
Constituent L3
A 90-d NOEC of ≥27 μg/l (time-weighted mean measured concentration; highest concentration tested) has been determined for the effects of L3 on embryo survival, larval hatch and growth (length and dry weight) of Oncorhynchus mykiss in a fish early-life stage test. The effects were evaluated over a 90-day period (including a period of approximately 6 weeks after controls were free-feeding). In view of the use of flow-through test conditions it is likely that the test organisms were exposed primarily to the parent substance (Smithers Viscient, 2010).
Constituent L4
A 60-d post-hatch NOEC of ≥7.9 µg/l (time weighted mean measured) has been determined for the effects of L4 (decamethyltetrasiloxane) on hatching, larval survival, abnormal appearance and behaviour in Oncorhynchus mykiss in the fish early-life stage test (OECD 210) (Smithers Viscient, 2013). In view of the exposure regime it is likely that the test organisms were exposed primarily to the tested substance rather than its degradation products.
Constituent L5
A 60-d post-hatch NOEC of ≥7.9 µg/l (time weighted mean measured) has been determined for the effects of the analogous substance, L4 (decamethyltetrasiloxane, CAS 141-62-8) on hatching, larval survival, abnormal appearance and behaviour in Oncorhynchus mykiss in the fish early-life stage test (OECD 210) (Smithers Viscient, 2013). In view of the exposure regime it is likely that the test organisms were exposed primarily to the tested substance rather than its degradation products.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.