Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 242-745-6 | CAS number: 19009-56-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 01 September 2017 to 08 September 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- The study was conducted in accordance with international guidelines and in accordance with GLP. All relevant validity criteria were met.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Freshwater Alga and Cyanobacteria, Growth Inhibition Test)
- Version / remarks:
- (2011)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.3 (Algal Inhibition test)
- Version / remarks:
- Council Regulation (EC) No. 266/2016 Method C.3 (2016)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: All concentration levels and the control were analytically verified via LC-MS after 0 (start of exposure), 24, 48 and 72 hours (end of the exposure). Therefore, the test item 2-Methyldecan-1-al and the corresponding transformation product 2-Methyldecanoic acid were analyzed and evaluated.
- Sampling method: Separate replicates for each test item concentration and control for the test item analysis at the beginning of the exposure were prepared with algae. The samples for the test item analysis after 24, 48 and 72 hours were prepared at the beginning of the exposure phase with algae and incubated under test conditions.
Additionally, the highest concentration level was analytically verified via analysis of total organic carbon (TOC, according to DIN EN 1484) at the start and the end of the exposure. Separate replicates for the TOC measurement were prepared without algae and without MES buffer and incubated under test conditions.
- Sample storage conditions before analysis: All samples were stored at room temperature until the start of analysis, if necessary. Prepared samples were stored at room temperature until analysis - Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: A saturated solution with a nominal loading of 100 mg/L was saturated solution prepared with dilution water 72 ± 1 hour prior to the start of the exposure. The test item was placed on to the surface of the dilution water with a pipette. A slow stirring procedure was applied. Gentle stirring (to avoid formation of an emulsion) was carried out with a magnetic stirrer at room temperature for 72 ± 1 hour. After stirring the saturated solution was allowed to settle for 4 hours and was then taken from the homogeneous phase and used for testing. Additionally, a saturated solution was prepared as described above with dilution water (without the compounds MES and NaHCO3). This saturated solution was used for analysis of the total organic carbon (TOC, according to DIN EN 1484) and Tyndall effect, which was negative.
The saturated solution and four dilution levels out of the saturated solution was tested in a geometrical series with a dilution factor of 2: 6.25 - 12.5 - 25.0 - 50.0 - 100% saturated solution.
- Eluate: Test medium in accordance with OECD 201
- Differential loading: Not applicable
- Controls: Six replicates (without test item) were exposed under the same conditions as the test concentrations.
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): Not applicable
- Concentration of vehicle in test medium (stock solution and final test solution(s) or suspension(s) including control(s)): Not applicable
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): No - Test organisms (species):
- Pseudokirchneriella subcapitata (previous names: Raphidocelis subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Pseudokirchneriella subcapitata
- Strain: HINDÁK, SAG 61.81
- Source (laboratory, culture collection): Sammlung von Algenkulturen (SAG), Pflanzenphysiologisches Institut der Universität Göttingen, Nikolausberger Weg 18, D-37073 Göttingen
- Age of inoculum (at test initiation): 3 days
- Method of cultivation: Preculture, prepared in dilution water, was used as inoculum
ACCLIMATION
- Acclimation period: Not applicable (laboratory culture)
- Culturing media and conditions (same as test or not): Fresh stocks are prepared every month on Z-Agar. Light intensity amounted to 2567 – 5130 lux for 24 hours per day. Nutrient medium Z according to LÜTTGE et al. (1994)
- Any deformed or abnormal cells observed: None reported - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
- Hardness:
- The medium has a nominal hardness of 0.24 mmol Ca+Mg/L
- Test temperature:
- Nominal range: 21 - 24 °C, controlled at ± 2 °C
- pH:
- As per guideline
- Dissolved oxygen:
- Not applicable
- Salinity:
- Not applicable
- Conductivity:
- Not applicable
- Nominal and measured concentrations:
- Refer to data tables
- Details on test conditions:
- TEST SYSTEM
- Test vessel: Sterile headspace flasks
- Type (delete if not applicable): closed
- Material, size, headspace, fill volume: volume: 59 mL, with aluminium tops with PTFE seals.
- Aeration: Test containers were placed on a rotary shaker and oscillated at approximately 70 rpm.
- Type of flow-through (e.g. peristaltic or proportional diluter): Not applicable
- Renewal rate of test solution (frequency/flow rate): Not applicable
- Initial cells density: Nominal: approximately 5 x 103 - 104 cells/mL, Actual: 6839 cells/mL
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 6
- No. of vessels per vehicle control (replicates): Not applicable
GROWTH MEDIUM
- Standard medium used: yes (OECD 201)
- Detailed composition if non-standard medium was used: Not applicable
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Not reported
OTHER TEST CONDITIONS
- Sterile test conditions: no
- Adjustment of pH: No
- Photoperiod: No (24 hours/day light)
- Light intensity and quality: Approximately 4440 to 8880 lux, corresponding to 60 to 120 µE*m-2*s-1
- Salinity (for marine algae): Not applicable
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) : EC10-, EC20- and EC50-value with confidence intervals of growth rate and yield inhibition after 72 hours was calculated by sigmoidal dose-response regression.
- Determination of cell concentrations: The cell density was measured daily via Chlorophyll-a-fluorescence, excitation at 436 nm, emission at 685 nm. Dilution water was used as background signal. No self-fluorescence was found in the definitive test at the saturated solution. The NOEC / LOEC was determined by calculation of statistical significance of growth rate and yield.
- Other: Microscopic evaluation of the cells at the start and end of the incubation was carried out. The cells were checked for any unusual cell shapes, colour differences, differences in chloroplast morphology, flocculation, adherence of algae to test containers or aggregation of algae cells.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 2.2
- Justification for using less concentrations than requested by guideline: Not applicable
- Range finding study
- Test concentrations: 1, 10 and 100 % saturated solution
- Results used to determine the conditions for the definitive study: Yes - Reference substance (positive control):
- yes
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 30.5 mg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- other: transformation product
- Remarks:
- 2-methyldecanoic acid
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 9.4 mg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- other: Transformation product
- Remarks:
- 2-methyldecanoic acid
- Basis for effect:
- other: yield
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 6.15 mg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- other: Transformation Product
- Remarks:
- 2-methyldecanoic acid
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- < 0.248 mg/L
- Nominal / measured:
- meas. (TWA)
- Conc. based on:
- other: Transformation Product
- Remarks:
- 2-methyldecanoic acid
- Basis for effect:
- other: yield
- Details on results:
- Microscopic evaluation of the cells at the start and end of exposure revealed no morphological abnormalities. All effect values are given based on the time weighted average test item concentrations.
The environmental conditions (pH-value, room temperature, light intensity) were determined to be within the acceptable limits. The test item solutions were concentration related turbid throughout the exposure phase.
The concentrations of the test item after derivatization with 2,4 Dinitrophenylhydrazine (DNPH) and the metabolite 2-methyldecanoic acid were determined in the fresh media (0 h), after 24 hours, after 48 hours and in 72 hours old media of all tested concentration levels and the control via LC-MS/MS.
The measured concentrations of the test item after derivatisation were < LOQ of the nominal value at the start of the exposure (0 hours), after 24 hours, after 48 hours and at the end of the exposure (72 hours). Therefore, the concentrations of the transformation product 2 Methyldecanoic acid were analyzed and calculated as 2-Methyldecan-1-al concentrations by conversion with a factor of 0.914 (based on the ration of the molar weights of the test item and its transformation product). The time weighted average concentrations of the test item were calculated based on these concentrations to be: 0.248 – 0.877 – 11.5 – 34.3 – 74.9 mg/L.
The total organic carbon content (TOC) of the saturated solution was 13.8 mg C/L at test initiation. After 72 h it was 13.7 mg C/L. - Results with reference substance (positive control):
- - Results with reference substance valid? Yes
- EC50:
72h ErC50 = 0.559 mg/L (with headspace), 0.811 mg/L (without headspace)
72h EyC50 = 0.320 mg/L (with headspace), 0.387 mg/L (without headspace)
- Other: - Reported statistics and error estimates:
- EC-values and statistical analyses:
EC10-, EC20- and EC50-value with confidence intervals of growth rate and yield inhibition after 72 hours was calculated by sigmoidal dose-response regression.
NOEC, LOEC Analyses:
The NOEC / LOEC was determined by calculation of statistical significance of growth rate and yield.
The following statistical tests were conducted:
Shapiro-Wilk’s test on normal distribution was done with a significance level of 0.01.
Levene’s test on variance homogeneity was done with a significance level of 0.01.
Monotonicity of Concentration/Response was assessed by trend analysis by contrasts (significance level: 0.05).
Williams Multiple t-test was done with a significance level of 0.05.
Software
The data for the tables in this report were computer-generated and have been rounded for presentation from the fully derived data. Consequently, if calculated manually based on the given data minor deviations may occur from these figures.
Calculations were carried out using software
Excel, MICROSOFT CORPORATION
SigmaPlot, SPSS INC.
GraphPad Prism, GRAPHPAD SOFTWARE, INC.
ToxRat Professional, Version 3.2.1, TOXRAT SOLUTIONS GMBH - Validity criteria fulfilled:
- yes
- Conclusions:
- In this study, 2-Methyldecan-1-al was found to inhibit the growth of the freshwater green alga Pseudokirchneriella subcapitataafter 72 hours with the following effect values (based on time weighted average test item concentrations): The EC50-values with 95% confidence intervals for inhibition of growth rate (ErC50) and yield (EyC50) after 72 hours were 30.5 (28.9 – 32.1) mg/L and 9.40 (6.44 – 11.0) mg/L. The EC10-values with 95% confidence intervals for inhibition of growth rate (ErC10) and yield (EyC10) after 72 hours were 6.15 (4.78 – 7.71) mg/L and < 0.248 mg/L.
- Executive summary:
The toxicity of the test item to the unicellular freshwater green alga Pseudokirchneriella subcapitata was determined according to the principles of OECD 201 and Council Regulation (EC) No. 266/2016 Method C.3. The aim of the study was the determination of NOEC, LOEC, EC10- , EC20- and EC50-values of the growth rate and the yield over a period of 72 hours.
The study was conducted under static conditions with an initial cell density of 6839 cells/mL. A saturated solution with a nominal loading of 100 mg/L was prepared with dilution water (see Table 2) 72 ± 1 hour prior to the start of the exposure. The test item was placed on to the surface of the dilution water with a pipette. A slow stirring procedure was applied. Gentle stirring (to avoid formation of an emulsion) was carried out with a magnetic stirrer at room temperature for 72 ± 1 hour. After stirring the saturated solution was allowed to settle for 4 hours and was then taken from the homogeneous phase and used for testing. Additionally, a saturated solution was prepared as described above with dilution water (without the compounds MES and NaHCO3). This saturated solution was used for analysis of the total organic carbon (TOC, according to DIN EN 1484) and Tyndall effect, which was negative. The saturated solution and four dilution levels out of the saturated solution were tested in a geometrical series with a dilution factor of 2: 6.25 - 12.5 - 25.0 - 50.0 - 100% of the saturated solution. Three replicates were tested for each test item concentration and six replicates for the control. The environmental conditions were within the acceptable limits.
The test media were concentration related turbid throughout the test period. The concentrations of the test item after derivatization with 2,4‑Dinitrophenylhydrazine (DNPH) and the metabolite 2-methyldecanoic acid were determined in the fresh media (0 h), after 24 hours, after 48 hours and in 72 hours old media of all tested concentration levels and the control via LC-MS/MS. The results are presented in Table 8. Details of the analytical method are presented in part 13.
The measured concentrations of the test item after derivatisation were < LOQ of the nominal value at the start of the exposure (0 hours), after 24 hours, after 48 hours and at the end of the exposure (72 hours). Therefore, the concentrations of the transformation product 2‑Methyldecanoic acid were analyzed and calculated as 2-Methyldecan-1-al concentrations by conversion with a factor of 0.914 (based on the ration of the molar weights of the test item and its transformation product). The time weighted average concentrations of the test item were calculated based on these concentrations to be: 0.248 – 0.877 – 11.5 – 34.3 – 74.9 mg/L.
In this study, 2-Methyldecan-1-al was found to inhibit the growth of the freshwater green alga Pseudokirchneriella subcapitataafter 72 hours with the following effect values (based on time weighted average test item concentrations): The EC50-values with 95% confidence intervals for inhibition of growth rate (ErC50) and yield (EyC50) after 72 hours were 30.5 (28.9 – 32.1) mg/L and 9.40 (6.44 – 11.0) mg/L. The EC10-values with 95% confidence intervals for inhibition of growth rate (ErC10) and yield (EyC10) after 72 hours were 6.15 (4.78 – 7.71) mg/L and < 0.248 mg/L.
Reference
Cell Densities
Time weighted average test item concentration |
Replicate |
Cell density [cells/mL] |
|||
[mg/L] |
No. |
0 hours |
24 hours |
48 hours |
72 hours |
74.9 |
1 |
6839 |
4510 |
5806 |
4943 |
2 |
6839 |
4873 |
4621 |
4914 |
|
3 |
6839 |
4320 |
4952 |
4621 |
|
Mean |
6839 |
4568 |
5126 |
4826 |
|
34.3 |
1 |
6839 |
7527 |
8287 |
54568 |
2 |
6839 |
6456 |
7061 |
63820 |
|
3 |
6839 |
6883 |
8697 |
46094 |
|
Mean |
6839 |
6955 |
8015 |
54827 |
|
11.5 |
1 |
6839 |
13753 |
41038 |
280051 |
2 |
6839 |
15099 |
40365 |
327792 |
|
3 |
6839 |
11763 |
38030 |
313232 |
|
Mean |
6839 |
13538 |
39811 |
307025 |
|
0.877 |
1 |
6839 |
16451 |
132394 |
572230 |
2 |
6839 |
19339 |
83108 |
643215 |
|
3 |
6839 |
20863 |
106270 |
698224 |
|
Mean |
6839 |
18884 |
107257 |
637890 |
|
0.248 |
1 |
6839 |
23140 |
153531 |
686520 |
2 |
6839 |
23023 |
132452 |
580832 |
|
3 |
6839 |
19193 |
148288 |
669373 |
|
Mean |
6839 |
21785 |
144757 |
645575 |
|
Control |
1 |
6839 |
34519 |
282228 |
716131 |
2 |
6839 |
42355 |
263162 |
776348 |
|
3 |
6839 |
37173 |
321425 |
789105 |
|
4 |
6839 |
36251 |
259604 |
684237 |
|
5 |
6839 |
45240 |
274457 |
696761 |
|
6 |
6839 |
33925 |
193079 |
754169 |
|
Mean |
6839 |
38244 |
265659 |
736125 |
Evaluation after 72 hours
Statistically significant differences of growth rates and yield compared
to
control values are marked (+), not significant differences are marked
(-).
Time weighted average test item concentration |
Replicate |
Growth rate |
Inhibition of growth rate |
Yield |
Inhibition of yield |
||
[mg/L] |
No. |
[d-1] |
[%] |
[cells/mL] |
[%] |
||
74.9 |
1 |
|
-0.108 |
100 |
|
-1896 |
100 |
2 |
|
-0.110 |
100 |
|
-1925 |
100 |
|
3 |
|
-0.131 |
100 |
|
-2218 |
100 |
|
Mean |
(+) |
-0.116 |
100 |
(+) |
-2013 |
100 |
|
34.3 |
1 |
|
0.692 |
56 |
|
47729 |
93 |
2 |
|
0.744 |
52 |
|
56981 |
92 |
|
3 |
|
0.636 |
59 |
|
39255 |
95 |
|
Mean |
(+) |
0.691 |
56 |
(+) |
47988 |
93 |
|
11.5 |
1 |
|
1.24 |
21 |
|
273212 |
63 |
2 |
|
1.29 |
17 |
|
320953 |
56 |
|
3 |
|
1.28 |
18 |
|
306393 |
58 |
|
Mean |
(+) |
1.27 |
19 |
(+) |
300186 |
59 |
|
0.877 |
1 |
|
1.48 |
5 |
|
565391 |
22 |
2 |
|
1.52 |
3 |
|
636376 |
13 |
|
3 |
|
1.54 |
1 |
|
691385 |
5 |
|
Mean |
(+)* |
1.51 |
3 |
(+) |
631051 |
13 |
|
0.248 |
1 |
|
1.54 |
1 |
|
679681 |
7 |
2 |
|
1.48 |
5 |
|
573993 |
21 |
|
3 |
|
1.53 |
2 |
|
662534 |
9 |
|
Mean |
(+)* |
1.52 |
3 |
(+) |
638736 |
12 |
|
Control |
1 |
|
1.55 |
|
|
709292 |
|
2 |
|
1.58 |
|
|
769509 |
|
|
3 |
|
1.58 |
|
|
782266 |
|
|
4 |
|
1.54 |
|
|
677398 |
|
|
5 |
|
1.54 |
|
|
689922 |
|
|
6 |
|
1.57 |
|
|
747330 |
|
|
Mean |
|
1.56 |
|
|
729286 |
|
* = considered biologically not significant
Section-by-Section and Average Specific Growth Rates of the Control Group
(0 - 72 hours)
|
Replicate No. |
Specific growth rate [d-1] |
Mean (0 - 72 hours) |
SD ± |
CV |
Mean CV [%] |
||
section-by-section |
||||||||
0 - 24 hours |
24 - 48 hours |
48 - 72 hours |
||||||
Control |
1 |
1.62 |
2.10 |
0.931 |
1.55 |
0.588 |
37.9 |
30.9 |
2 |
1.82 |
1.83 |
1.08 |
1.58 |
0.429 |
27.2 |
||
3 |
1.69 |
2.16 |
0.898 |
1.58 |
0.637 |
40.2 |
||
4 |
1.67 |
1.97 |
0.969 |
1.54 |
0.513 |
33.4 |
||
5 |
1.89 |
1.80 |
0.932 |
1.54 |
0.530 |
34.4 |
||
6 |
1.60 |
1.74 |
1.36 |
1.57 |
0.191 |
12.2 |
||
|
|
|
Mean |
1.56 |
|
|
||
|
|
|
SD ± |
0.02 |
|
|||
|
|
|
CV [%] |
1.26 |
|
SD = Standard deviation CV = Coefficient of variation
Environmental Conditions
Time weighted average test item concentration |
pH-value |
|||
[mg/L] |
Start; 0 hours |
End; 72 hours |
||
74.9 |
7.40 |
7.47 |
||
34.3 |
7.79 |
7.74 |
||
11.5 |
7.91 |
8.00 |
||
0.877 |
8.01 |
8.56 |
||
0.248 |
8.03 |
8.96 |
||
Control |
8.05 |
9.42 |
||
Room temperature [°C]: |
min.: 21.0 |
max.: 23.5 |
mean value: 22.3 |
|
Light intensity |
n = 27 |
mean value: 5804 range of the measured values: 5075 to 6308 equalling -12.6 to 8.68 % |
CV [%]: 6.21 |
|
CV = Coefficient of variation n = number of measuring points
Measured Concentrations of the Nominal Concentration of2‑Methyldecan-1-al
Sampling date |
0 hours |
24 hours |
48 hours |
72 hours |
|
||||
Nominal concentration of the test item of saturated solution] |
2‑Methyldecan-1-al |
|
|||||||
Meas. conc. [mg/L] |
Calc. conc. [mg/L] |
Meas. conc. [mg/L] |
Calc. conc. [mg/L] |
Meas. conc. [mg/L] |
Calc. conc. [mg/L] |
Meas. conc. [mg/L] |
Calc. conc. [mg/L] |
Time weighted average1) [mg/L] |
|
100 |
84.7 |
78.2 |
83.0 |
76.6 |
79.7 |
73.6 |
77.0 |
71.1 |
74.9 |
50.0 |
42.5 |
39.2 |
36.7 |
33.9 |
37.1 |
34.2 |
33.6 |
31.0 |
34.3 |
25.0 |
23.1 |
21.4 |
15.9 |
14.7 |
12.4 |
11.4 |
4.19 |
3.87 |
11.5 |
12.5 |
11.9 |
11.0 |
4.34 |
4.01 |
< LOQ |
< LOQ |
0.877 |
||
6.25 |
5.17 |
4.77 |
< LOQ |
< LOQ |
< LOQ |
0.248 |
|||
Control |
< LOQ |
< LOQ |
< LOQ |
< LOQ |
|
Meas. conc = Measured concentration of the metabolite 2-Methyldecanoic acid, dilution and weighing factor was taken into account
Calc. conc. = equivalent concentration of2‑Methyldecan-1-alcalculated from the measured metabolite concentration (conversion factor: 0.914, based on the ratio of molar weights of2‑Methyldecan‑1‑al: 2-Methyldecanoic acid, 170.3 g/mol : 186.3 g/mol)
LOQMetabolite = limit of quantification of the analytical method for the transformation product 2-methyldecanoic acid (0.3 mg 2-methyldecanoic acid/L)
LOQTest item = limit of quantification of the analytical method for the test item (0.1 mg test item/L)
= ½ x LOQMetabolite (corresponding to 0.137 mg test item/L) was taken into account
Description of key information
72h ErC50 = 30.5 mg/L (meas.), 72h ErC10 = 6.15 mg/L (meas.); OIECD 202; Anon, 2017
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 30.5 mg/L
- EC10 or NOEC for freshwater algae:
- 6.15 mg/L
Additional information
In a single key study, the effects of the test item to freshwater algae were determined at the test facility according to OECD 201.
To account for degradation of the parent substance aldehyde to acid or further degradation products, preliminary testing was conducted to assess the stability of the test item under test conditions. After 24 hours of slow stirring, followed by a 1 hour settlement phase, all measured concentrations via LC-MS/MS of test item were below LOQ. A second stability assessment was conducted with analysis of the test item (parent) and the corresponding transformation product (2 -methyldecanoic acid) using a saturated solution with a nominal concentration of 100 mg/L. Slow stirring was applied to the test solution. Analytical samples were taken at 0, 24, 48 and 72 hours after initiation of stirring.
Measured concentrations of the parent substance were <LOQ at all time points. The highest concentration of transformation product was found after 72 hours of stirring. The measured amount of transformation product was calculated as the corresponding amount of parent. This preliminary work was used to design the medium preparation method for this study. In accordance with OECD Series on Testing and Assessment No. 23 (2000), when chemical substances have a very short half-life, it is more relevant to assess the toxicity of the major transformation product(s) as the toxicity of this entity is more relevant for actual environmental exposure. Therefore, the acute toxicity testing on aquatic invertebrates is based on the measured amount of transformation product expressed as the corresponding amount of parent.
The toxicity of the test item to the unicellular freshwater green alga Pseudokirchneriella subcapitata was determined according to the principles of OECD 201 and Council Regulation (EC) No. 266/2016 Method C.3. The aim of the study was the determination of NOEC, LOEC, EC10- , EC20- and EC50-values of the growth rate and the yield over a period of 72 hours.
The study was conducted under static conditions with an initial cell density of 6839 cells/mL. A saturated solution with a nominal loading of 100 mg/L was prepared with dilution water (see Table 2) 72 ± 1 hour prior to the start of the exposure. The test item was placed on to the surface of the dilution water with a pipette. A slow stirring procedure was applied. Gentle stirring (to avoid formation of an emulsion) was carried out with a magnetic stirrer at room temperature for 72 ± 1 hour. After stirring the saturated solution was allowed to settle for 4 hours and was then taken from the homogeneous phase and used for testing. Additionally, a saturated solution was prepared as described above with dilution water (without the compounds MES and NaHCO3). This saturated solution was used for analysis of the total organic carbon (TOC, according to DIN EN 1484) and Tyndall effect, which was negative. The saturated solution and four dilution levels out of the saturated solution were tested in a geometrical series with a dilution factor of 2: 6.25 - 12.5 - 25.0 - 50.0 - 100% of the saturated solution. Three replicates were tested for each test item concentration and six replicates for the control. The environmental conditions were within the acceptable limits.
The test media were concentration related turbid throughout the test period. The concentrations of the test item after derivatization with 2,4‑Dinitrophenylhydrazine (DNPH) and the metabolite 2-methyldecanoic acid were determined in the fresh media (0 h), after 24 hours, after 48 hours and in 72 hours old media of all tested concentration levels and the control via LC-MS/MS. The results are presented in Table 8. Details of the analytical method are presented in part 13.
The measured concentrations of the test item after derivatisation were < LOQ of the nominal value at the start of the exposure (0 hours), after 24 hours, after 48 hours and at the end of the exposure (72 hours). Therefore, the concentrations of the transformation product 2‑Methyldecanoic acid were analyzed and calculated as 2-Methyldecan-1-al concentrations by conversion with a factor of 0.914 (based on the ration of the molar weights of the test item and its transformation product). The time weighted average concentrations of the test item were calculated based on these concentrations to be: 0.248 – 0.877 – 11.5 – 34.3 – 74.9 mg/L.
In this study, 2-Methyldecan-1-al was found to inhibit the growth of the freshwater green alga Pseudokirchneriella subcapitataafter 72 hours with the following effect values (based on time weighted average test item concentrations): The EC50-values with 95% confidence intervals for inhibition of growth rate (ErC50) and yield (EyC50) after 72 hours were 30.5 (28.9 – 32.1) mg/L and 9.40 (6.44 – 11.0) mg/L. The EC10-values with 95% confidence intervals for inhibition of growth rate (ErC10) and yield (EyC10) after 72 hours were 6.15 (4.78 – 7.71) mg/L and < 0.248 mg/L.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)