Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 940-005-3 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Administrative data
First-aid measures
Seek medical attention immediately in all cases of exposure!
Inhalation: Due to low vapor pressure at room temperature, Petol polyols alone are not likely to be inhaled. When material is heated and/or if a fine mist is being generated, local ventilation and respiratory protection may be required. In this case symptoms may include cough and sometimes slight dizziness. Remove the affected person to fresh air. If any ill effects appear get medical attention immediately.
Skin contact: Skin contact with the product is not like to result in a significant irritation. Remove contaminated clothing and shoes, and wash before reuse. Wash skin with soap and plenty of water immediately at least 15 minutes, until no evidence of chemical remains. If skin irritation occur give medical attention.
Eye contact: Contact with eyes cause slight temporary irritation. Wash eyes immediately with large amounts of water or normal saline, occasionally lifting upper and lower lids, until no evidence of chemical remains at least 15 minutes. Get medical attention immediately if pain, blinking, tears or redness persist.
Ingestion: Glycerol propoxylated polyols has low to very low oral toxicity. Swallowing small amount of this product is not likely to cause injury. Although swallowing of large quantity of glycerol propoxylated may cause same toxic effects, the possibility of such of ingestion is unlikely with proper industrial handling and use. If polyol is swallowed, give large amount of water to dilute, but never give fluids if patient is unconscious or is having convulsions. For large amount of polyol swallowed, seek medical attention.
Note to Physician: No specific antidote. Treat symptomatically and supportively.
Fire-fighting measures
Suitable extinguishing media: Dry chemical, carbon dioxide, chemical foam and water spray.
Unsuitable extinguishing media: None
Exposure hazards: Glycerol propoxylated have a low vapours pressure and a flash point above 2000C and consequently are not considered to have a serious fire hazard. However, due the fact that it is an organic material, this polyol will burn under the right conditions of heat and oxygen supply or in presence of an existing fire. Heat from fire can generate hazardous vapors. Burning liquids may be moved by flushing water to protect personnel and minimize damage. Do not use direct water stream as it may spread the fire.
Protection of the fire-fighters: During fire-fighting keep containers cool with water spray. Fire-fighters should wear full protective equipment and self-contained breathing apparatus with a full face-piece operated in positive pressure mode.
Accidental release measures
Personal precautions: No special protection. Wear appropriate personal protective equipment. Spills generate slippery walking. Spread granular cover. Remove sources of ignition and surrounding the affected area.
Environmental precautions: In case of a spill, prevent contamination of soil, ground and surface water by isolating the hazard area. At ambient temperature, polyols are in fact nonvolatile, making evaporation to the atmosphere unlikely.
Methods of cleaning up: Absorb spills with dry sand, earth or similar absorbent material then collect into drums for later disposal. Incinerate or bury in a licensed facility according to national environmental regulations.
For small spills: Minor spills on concrete or other hard surfaces can be wiped or mopped up. Also small spills can be absorbed with dry sand, earth, vermiculite then collect into drums, small containers for later disposal. Dispose according to all applicable federal, state or local environment regulations.
For large spills: Industrial spill or release are accidental and are generally contained. For large spills, dike and pump into suitable containers for disposal. The residual spilled material may be absorbed with dry absorbent material (sand, earth, vermiculite). Flush area with plenty of water. Waste water will be treated in biological treatment plant.
Dispose according to the governmental requirements.
Special precautions: Do not flush to sewer! Slippery walking! Spread granular cover!
Handling and storage
Handling: No special measures required. It is not considered a hazardous material in most industrial operations. Sources of ignition such as smoking and open flames are prohibited where this compound is handled. During handling operations avoid accidental contact with isocyanates.
Only properly trained and equipped personnel should be permitted to handling and to unload drums.
Avoid unintended contact with isocyanates to prevent uncontrolled polymerisation.
Storage: Store in tightly closed containers, in dry and well ventilated areas, between 15-30oC. During shipping and storage the temperature must be kept within the recommended range, in order to maintain product quality. Prevent contact with water or with moist atmosphere, as product is hygroscopic. Use dry nitrogen or low dew point air for tank padding.
Avoid contact with oxidizing materials such as peroxides and hypochlorite salts.
Drums storage recommendations: Drums should be store indoors and the storage temperature should be keep above 150C. Keep drums tightly closed to prevent contamination. If drums are received frozen, before using, be sure the contents are completely thawed and mixed. In warm season the drums may be stored outdoors, but must be careful to prevent water collection on the top of drums by covering the drums with a tarpaulin or by stacking them on their sides.
Bulk storage recommendations: Tank area should be dike. Tanks located outdoors may be exposed to temperature extremes so they can be insulated. Insulation is not necessary when tanks are placed indoor and normal temperature is maintained.
Glycerol propoxylated can be shipped and stored in stainless steel tanks, steel drums lined inside, IBC Polyethylene tanks with UV protection.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.