Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 257-104-6 | CAS number: 51277-96-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2018-07-23 to 2018-11-27
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- Version / remarks:
- 2000
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.18 (Adsorption / Desorption Using a Batch Equilibrium Method)
- Version / remarks:
- 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- batch equilibrium method
- Media:
- soil
- Radiolabelling:
- no
- Test temperature:
- 20-25°C
- Analytical monitoring:
- yes
- Details on sampling:
- The soil suspensions were centrifuged after agitation at ≥ 4000 rpm to separate the phases, followed by analysing the concentration of the test item in aqueous phase by LC-MS. For analysis of the soil, the aqueous phase was decanted and the soil was extracted. During tier 1, test vessels were extracted and rinsed with acetonitrile / ultrapure water 50/50 containing 1 % formic acid to determine test vessel adsorption. Extracts were also analysed by LC-MS.
- Matrix no.:
- #1
- Matrix type:
- other: Silty sand (LUFA 2.1)
- % Clay:
- 4.1
- % Silt:
- 10.5
- % Sand:
- 85.4
- % Org. carbon:
- 0.718
- pH:
- 4.9
- CEC:
- 2.4 meq/100 g soil d.w.
- Matrix no.:
- #2
- Matrix type:
- other: Loamy sand (LUFA 2.2)
- % Clay:
- 8.5
- % Silt:
- 11.3
- % Sand:
- 80.2
- % Org. carbon:
- 1.47
- pH:
- 5.4
- CEC:
- 7.6 meq/100 g soil d.w.
- Matrix no.:
- #3
- Matrix type:
- other: Silty sand (LUFA 2.3)
- % Clay:
- 8.6
- % Silt:
- 29.3
- % Sand:
- 62.1
- % Org. carbon:
- 0.412
- pH:
- 5.9
- CEC:
- 4.9 meq/100 g soil d.w.
- Matrix no.:
- #4
- Matrix type:
- other: Clayey loam (LUFA 2.4)
- % Clay:
- 25.2
- % Silt:
- 42.3
- % Sand:
- 32.6
- % Org. carbon:
- 1.74
- pH:
- 7.4
- CEC:
- 22 meq/100 g soil d.w.
- Matrix no.:
- #5
- Matrix type:
- other: Loamy sand (LUFA 5M)
- % Clay:
- 10.2
- % Silt:
- 31.1
- % Sand:
- 58.7
- % Org. carbon:
- 0.916
- pH:
- 7.3
- CEC:
- 10 meq/100 g soil d.w.
- Details on matrix:
- COLLECTION AND STORAGE
- Geographic location: Landwirtschaftliche Untersuchungs- und Forschungsanstalt LUFA Speyer, Obere Langgasse 40, 67346 Speyer, Germany
Standard LUFA soils 2.1, 2.2, 2.3, 2.4 and 5M in contact to 0.01 M CaCl2-solution were used for this study. These matrices have varying adsorption capacities in relation to their content of organic matter, clay, pH and cation exchange capacity. All soils are air-dried and sieved to a maximum particle size of 2 mm by the distributor.
Storage at test facility Room temperature, in closed containers
Expiry date LUFA 2.1 (batch: F2.1 2817): 2022-07-24
LUFA 2.2 (batch: F2.2 4016): 2021-10-24
LUFA 2.3 (batch: F2.3 4116): 2021-10-24
LUFA 2.4 (batch: F2.4 4116): 2021-10-24
LUFA 5M (batch: F5M 5015): 2020-12-17 - Details on test conditions:
- Soil / Solution ratio Test volume: 40mL
Tier 1: 1:40 and 1:10
Tier 2 and Tier 3: 1:10
Sampling points Tier 1: 2h, 5h and 24h for soil / solution ratio 1:40
Tier 1: 2h, 4h and 24h for soil / solution ratio 1:10
Tier 2: 1h, 2h, 4h, 6h, 24h
Desorption kinetics: 2h, 4h, 6h, 24h and 48h
Adsorption Isotherms: 24h for LUFA soil 2.1
4h for the other soils
Agitation By horizontal shaker. Frequency was adjusted to avoid sedimentation of soil particles during treatment.
Test temperature The temperature was mainly in the range of 20 to 25 °C during the course of the study. Deviations from this temperature range were brief periods (<< 1h) between 18 and 20 °C during tier 1. Furthermore the temperature reached a minimum of 17.3 °C during a conditioning phase for the desorption kinetics. For details refer to section 5.
Test vessels 50 mL disposable centrifugation tubes
Concentration 2 mg test item /L (concentration used for adsorption kinetics)
1 mg test item /L
0.2 mg test item /L
0.1 mg test item /L
0.02 mg test item /L
Stock solutions Stock solutions of 2, 1, 0.2, 0.1 and 0.02 g/L of the test item in methanol were prepared.
Preparation of the soil samples (conditioning) The soils were weighed into the test vessels and an appropriate volume of 0.01 M CaCl2-solution was added. After agitation overnight (12 h minimum), the samples were used for adsorption experiments.
Preparation of the samples (adsorption experiments) The soil samples were conditioned as described above. 0.1 volume-% (0.04 mL) of the stock solutions were added in order to adjust the test concentrations. Afterwards, the samples were agitated.
Preparation of the samples (desorption experiments) Samples at adsorption equilibrium were used for this purpose. After completion of the adsorption experiments the test vessels were centrifuged, weighed and the supernatant was replaced by fresh 0.01 M CaCl2-solution. Then the test vessels were agitated again to investigate the desorption behavior of the test item.
Replicates All samples were prepared in duplicate.
CONTROLS CaCl2-solution was conditioned as described above, followed by separation of the aqueous phase by centrifugation. Then the aqueous phase was fortified acc. to the concentrations used for the test item samples to verify the stability of the test item in the aqueous phase under test conditions. The samples were agitated as long as the test item sample with the longest agitation period.
Replicates Duplicates (tier 1)
BLANK Blank samples were prepared for all soils as described for the test item samples but without fortification with the test item. The samples were agitated as long as the samples with the longest agitation period.
Replicates Duplicates (tier 1), single (tier 2) - Type:
- Koc
- Value:
- 77 057 L/kg
- pH:
- 5.8
- Temp.:
- 20 °C
- Matrix:
- LUFA 2.1
- % Org. carbon:
- 0.718
- Type:
- Koc
- Value:
- 45 361 L/kg
- pH:
- 6.3
- Temp.:
- 20 °C
- Matrix:
- LUFA 2.2
- % Org. carbon:
- 1.47
- Type:
- Koc
- Value:
- 151 587 L/kg
- pH:
- 6.8
- Temp.:
- 20 °C
- Matrix:
- LUFA 2.3
- % Org. carbon:
- 0.412
- Type:
- Koc
- Value:
- 95 475 L/kg
- pH:
- 7.3
- Temp.:
- 20 °C
- Matrix:
- LUFA 2.4
- % Org. carbon:
- 1.74
- Type:
- Koc
- Value:
- 183 082 L/kg
- pH:
- 7.2
- Temp.:
- 20 °C
- Matrix:
- LUFA 5M
- % Org. carbon:
- 0.916
- Key result
- Type:
- Koc
- Remarks:
- geom. mean
- Value:
- 98 478 L/kg
- pH:
- 7
- Temp.:
- 20 °C
- % Org. carbon:
- >= 0.412 - <= 1.74
- Phase system:
- solids-water in soil
- Type:
- Kp
- Value:
- 553 L/kg
- Temp.:
- 20 °C
- pH:
- 5.8
- Matrix:
- LUFA 2.1
- % Org. carbon:
- 0.718
- Phase system:
- solids-water in soil
- Type:
- Kp
- Value:
- 667 L/kg
- Temp.:
- 20 °C
- pH:
- 6.3
- Matrix:
- LUFA 2.2
- % Org. carbon:
- 1.47
- Phase system:
- solids-water in soil
- Type:
- Kp
- Value:
- 625 L/kg
- Temp.:
- 20 °C
- pH:
- 6.8
- Matrix:
- LUFA 2.3
- % Org. carbon:
- 0.412
- Phase system:
- solids-water in soil
- Type:
- Kp
- Value:
- 1 661 L/kg
- Temp.:
- 20 °C
- pH:
- 7.3
- Matrix:
- LUFA 2.4
- % Org. carbon:
- 1.74
- Phase system:
- solids-water in soil
- Type:
- Kp
- Value:
- 1 677 L/kg
- Temp.:
- 20 °C
- pH:
- 7.2
- Matrix:
- LUFA 5M
- % Org. carbon:
- 0.916
- Key result
- Phase system:
- solids-water in soil
- Type:
- Kp
- Remarks:
- geom. mean
- Value:
- 915 L/kg
- Temp.:
- 20 °C
- pH:
- 7
- % Org. carbon:
- >= 0.412 - <= 1.74
- Transformation products:
- not measured
- Conclusions:
- The test item concentrations in the aqueous phase in the lower application concentrations could not be determined at the end of the agitation phase due to the nearly quantitative depletion of the test item. Therefore, no direct analytical method (parallel analysis of samples of soil and aqueous phase) could be applied. Rather, a linear adsorption behavior was assumed with the consequence that the test item concentrations in the aqueous phase for the application concentrations K2 – K5 were extrapolated from the experimental derived values in tier 2. Furthermore, the test item concentration in soil was experimentally determined for all concentration levels and all soils. But, the decreasing mass balances and the calculation of the adsorption isotherms showed a nonlinear adsorption and therefore that no extrapolation of the test item concentrations for the aqueous phase is possible. For this reason, no adsorption isotherms could be calculated. Either fast formation of non-extractable residues (NERs), relatively increasing in the lower application levels, or biodegradation of the test item in soil could be possible explanations for the nonlinear adsorption behavior. The test item is readily biodegradable as shown in a modified Sturm test according to OECD 301B (Maischak, Noack ID: 180326EJ AST18175, 2018). In addition, it is worthy of mention that there was no significant decrease in the mass balances of an adsorption / desorption study according to OECD 106 recently conducted with another cationic amine derivative (Goller, Noack ID: 170524EJ CAD18111, 2018). The test item used in the last-mentioned study is not readily biodegradable as shown in a headspace test according to OECD 310 (Maischak, Noack ID: 170524EJ AHT18110, 2018). For this reason, it is more likely that biodegradation is responsible for the decreasing mass balances and the nonlinear adsorption behaviour.
Furthermore, no distribution coefficients Kdes were determined because the test item concentrations in the soils should decrease during the course of the experiment due to biodegradation. Therefore, no reference point for the calculation of the endpoints was available. The measured low concentrations in the aqueous phase at the end of the desorption experiment show that desorption is not relevant.
Only organic carbon normalized distribution coefficients Koc for the highest application level (K1) could be derived because the direct analytical method (parallel analysis of test vessel adsorption, test item concentration in the aqueous phase and soil) was applied. Values ranged from 45361 to 183082 mL/g with a geometric mean value of 98478 mL/g. For the distribution coefficient Kd a geometric mean value of 915 mL/g was derived.The test item adsorbs to all tested soils with Koc values > 5000 and is therefore immobile in soils according to McCall et al. - Executive summary:
The adsorption / desorption behavior of the test item C16 Alkylamidopropyltrimethylammonium Chloride was investigated in five different soils according to OECD guideline 106 and Council Regulation (EC) No. 440/2008, C.18. Distribution coefficients Kd and organic carbon normalized distribution coefficients Koc ere determined with a single concentration. Furthermore, investigations about the desorption behaviour and the degree of the adsorption as a function of the test item loading level (Freundlich adsorption isotherms) in the aqueous phase were performed. No endpoints could be reliably derived for these experiments due to the reasons given below. The test item was analysed by LC-MS/MS. Relevant properties of the used soils are given in Table 1. Experiments for adsorption and desorption kinetics were conductedwith a nominal test item concentration of 2 mg test item/L (K1). Additional concentrationsof 1, 0.2, 0.1 and 0.02 mg test item/L (K2 – K5) were used for the determination of the Freundlich adsorption isotherms.
Table1: Relevant Characteristics of Test Matrices
Soils
LUFA 2.1
LUFA 2.2
LUFA 2.3
LUFA 2.4
LUFA 5M
batch
F2.1 2817
F2.2 4016
F2.3 4116
F2.4 4116
F5M 5015
Soil Type1)
Silty sand
Loamy sand
Silty sand
Clayey loam
Loamy sand
pH (0.01 M CaCl2)3)
4.9
5.4
5.9
7.4
7.3
Organic Carbon [%]2)
0.718
1.47
0.412
1.74
0.916
Clay (<0.002 mm) [%]2)
4.1
8.5
8.6
25.2
10.2
Silt (0.002-0.063 mm) [%]2)
10.5
11.3
29.3
42.3
31.1
Sand (0.063-2 mm) [%]2)
85.4
80.2
62.1
32.6
58.7
Cation Exchange Capacity [mval/100g]2)
2.4
7.6
4.9
22
10
1)according to German DIN
2)determined at Agrolab Agrar und Umwelt GmbH (non-GLP)
3) Analyses data sheet provided by LUFA
Results of Tier 1
Tier 1– Test Vessel Adsorption
Experiments in tier 1 showed that the test item is prone for adsorption to the vessel surfaces of the polypropylene centrifugation tubes. Test item controls (the test item dissolved and agitated in the test vessel without soil) prepared in0.01 M CaCl2 or in soil eluates of LUFA 2.2 and LUFA 2.4 showed a test vessel adsorption of approximately 10%. For this reason, no test item controls were prepared and analysed during the further experiments because being useless for the interpretation and assessment of the study results. In addition, the test vessel adsorption in soil suspension of all soils was determined. Two different soil / solution ratios (1:10 and 1:40) were tested with the soils LUFA 2.2 and LUFA 2.4 for this purpose. The test vessel adsorption was lower in the samples with the higher soil /solution ratio. A soil / solution ratio of 1:10 was used for the further experiments during this study. The test vessel adsorption ranged from 0.6 to 3.3% under this condition for all tested soils.
Tier 1– Adsorption Kinetics
The test item depletion of the test item in the aqueous phase in soil suspensions with a soil / solution of 1:10 was nearly quantitative within 2 hours of the experiments with the soils LUFA 2.2 and LUFA 2.4. These results were obtained by the indirect method; only the concentration of the test item in the aqueous phase was determined. An agitation time of 24 hours was used for the adsorption kinetic experiments in tier 2 based on these experiments. The agitation time was reduced to 4 hours during the experiments for the adsorption isotherms in all soils except for the soil LUFA 2.1.
Tier 1– Parental Mass Balance
The parental mass balance for the test item was determined in all soils with an application concentration of 2 mg/L, a soil / solution ratio of 1:10 and after an agitation time of 4 hours for the soils LUFA 2.2, 2.3, 2.4 and 5M. 24 hours of agitation were used for the soil LUFA 2.1. The parental mass balances were finally calculated by taking into account the test item recovery on the test vessel surfaces, in the aqueous phase and in the soil. The extraction method for soil was optimized prior to these experiments by preparing samples in the soil LUFA 2.4. This soil was used for this purpose because this soil has the highest amount of organic carbon and clay. These parameters have a significant impact on the adsorption of organic compounds in soils. In general, high values for these parameters are responsible for high adsorption and fast / increased formation of non-extractable residues (NERs). A harsh extraction with an accelerated solvent extractor (ASE) was finally used for extraction of the test item It is more likely to obtain the best extraction efficiency with an ASE for aged samples than with an extraction at ambient temperature because the ASE extraction uses a combination of elevated temperature and pressure. Further experiments during method development indicated a decline of test item recovery in extracts of aged soil samples. Mass balances between 57 and 92% were obtained.
Results Tier 2– Adsorption Kinetics
These experiments confirmed the results of tier 1. The test item depletion in the aqueous phase ranged from 96 to 99% after 24 hours of agitation. Only the aqueous phase was analysed during these experiments. It was decided to waive further analysis of the aqueous phase during the determination of the adsorption isotherms duringtier 3based on these results. The concentrations of the test item in the aqueous phase were often in the lower range of the calibration with only low dilution factors. In consequence, concentrations lower than the lowest calibration level would have been obtained in the lower application concentrations during the determination of the adsorption isotherms. For this reason, the measurement of theses samples was useless for the determination of the adsorption isotherms.
Results Tier 3
Results Tier 3– Desorption Kinetics
Only samples of the aqueous phase were analysed for this purpose. Test item concentrations in the aqueous phase lower than 1% related to the applied test item amount (2 mg test item/L) were determined in the desorption kinetic experiments. The desorption is negligible under the used experimental conditions (24 hours adsorption and 48 hours desorption). Therefore, no experiments for the determination of the desorption isotherms were conducted.
ResultsTier 3– Adsorption Isotherms
Analysis during the determination of the adsorption isotherms were performed by analysing soil extracts of all concentration levels. The concentrations in the aqueous phase were calculated from the corresponding data of the adsorption kinetics and extrapolating the adsorption in % also to the lower concentration levels based on the assumption that the adsorption behavior is linear. Table 2 presents the obtained data.
Table2: Freundlich Adsorption Isotherms
Applied test item concentrations: 2, 1, 0.2, 0.1, 0.02 mg/L
Volume of aqueous phase: 40 mL
Soil Type
msoil[g]
r2
1/n
KFads
KFOC
LUFA 2.1
3.88
0.995
1.47
3243
451638
LUFA 2.2
3.71
0.997
1.14
1121
76255
LUFA 2.3
3.84
0.997
1.20
1340
325155
LUFA 2.4
3.62
0.995
1.10
2460
141384
LUFA 5M
3.70
0.992
1.11
2582
281835
msoil = used amount of soil (dry weight) [g]n = regression constant
KFads = Freundlich adsorption coefficient [µg1-1/n(mL)1/ng-1]
KFOC = Freundlich adsorption coefficient normalized to content of organic carbon [µg1-1/n(mL)1/ng-1]
A further assessment for the results of these experimentswasperformed because the values for the inverse regression constant 1/n (slope of the linear regression) were not plausible. These values were ≥ 1.1 and are not between 0.7 and 1 as expected for a Freundlich adsorption behavior. Furthermore, a strong decrease of the extracted test item amount from the soils was observed towards the lower application concentrations. This fact is in accordance to the implausible values for the inverse regression constants 1/n indicating a significant nonlinear adsorption behaviour. For this reason, individual organic carbon normalized distribution coefficients Koc were calculated (see Table 3) per application level and for all soils and compared with the organic carbon normalised Freundlich adsorption coefficients KFoc. Table3 indicates that the organic carbon normalized distribution coefficients Koc are lower than the corresponding organic carbon normalised Freundlich adsorption coefficients KFoc. Furthermore, a decrease of these values towards the lower application levels was determined. These data clearly indicate that the adsorption is significantly nonlinear.
Table3: Individual organic carbon normalized Distribution Coefficients Koc
Applied test item concentrations: 2, 1, 0.2, 0.1, 0.02 mg/L
Volume of aqueous phase: 40 mL
Application Level
KOC
LUFA 2.1
LUFA 2.2
LUFA 2.3
LUFA 2.4
LUFA 5M
K1
77057
45361
151587
95475
183082
K2
57954
42678
149890
86546
171219
K3
18510
37103
95755
62844
105760
K4
15737
25591
76229
66114
105856
K5
9870
25420
68902
62717
123801
Conclusions and Impact on the Study Endpoints
The test item concentrations in the aqueous phase in the lower application concentrations could not be determined at the end of the agitation phase due to the nearly quantitative depletion of the test item. Therefore, no direct analytical method (parallel analysis of samples of soil and aqueous phase) could be applied. Rather, a linear adsorption behavior was assumed with the consequence that the test item concentrations in the aqueous phase for the application concentrations K2 – K5 were extrapolated from the experimental derived values in tier 2. Furthermore, the test item concentration in soil was experimentally determined for all concentration levels and all soils. But, the decreasing mass balances and the calculation of the adsorption isotherms showed a nonlinear adsorption and therefore that no extrapolation of the test item concentrations for the aqueous phase is possible. For this reason, no adsorption isotherms could be calculated. Either fast formation of non-extractable residues (NERs), relatively increasing in the lower application levels, or biodegradation of the test item in soil could be possible explanations for the nonlinear adsorption behavior. The test item is readily biodegradable as shown in a modified Sturm test according to OECD 301B (Maischak, Noack ID: 180326EJ AST18175, 2018). In addition, it is worthy of mention that there was no significant decrease in the mass balances of an adsorption / desorption study according to OECD 106 recently conducted with another cationic amine derivative (Goller, Noack ID: 170524EJ CAD18111, 2018). The test item used in the last-mentioned study is not readily biodegradable as shown in a headspace test according to OECD 310 (Maischak, Noack ID: 170524EJ AHT18110, 2018). For this reason, it is more likely that biodegradation is responsible for the decreasing mass balances and the nonlinear adsorption behaviour.
Furthermore, no distribution coefficients Kdes were determined because the test item concentrations in the soils should decrease during the course of the experiment due to biodegradation. Therefore, no reference point for the calculation of the endpoints was available. The measured low concentrations in the aqueous phase at the end of the desorption experiment show that desorption is not relevant.
Only organic carbon normalized distribution coefficients Koc for the highest application level (K1) could be derived because the direct analytical method (parallel analysis of test vessel adsorption, test item concentration in the aqueous phase and soil) was applied. Values ranged from 45361 to 183082 mL/g with a geometric mean value of 98478 mL/g. For the distribution coefficient Kd a geometric mean value of 915 mL/g was derived.The test item adsorbs to all tested soils with Koc values > 5000 and is therefore immobile in soils according to McCall et al.
Reference
Description of key information
The test item concentrations in the aqueous phase in the lower application concentrations could not be determined at the end of the agitation phase due to the nearly quantitative depletion of the test item. Therefore, no direct analytical method (parallel analysis of samples of soil and aqueous phase) could be applied. Rather, a linear adsorption behavior was assumed with the consequence that the test item concentrations in the aqueous phase for the application concentrations K2 – K5 were extrapolated from the experimental derived values intier 2. Furthermore, the test item concentration in soil was experimentally determined for all concentration levels and all soils. But, the decreasing mass balances and the calculation of the adsorption isotherms showed a nonlinear adsorption and therefore that no extrapolation of the test item concentrations for the aqueous phase is possible. For this reason, no adsorption isotherms could be calculated. Either fast formation of non-extractable residues (NERs), relatively increasing in the lower application levels, or biodegradation of the test item in soil could be possible explanations for the nonlinear adsorption behavior. The test item is readily biodegradable as shown in a modified Sturm test according to OECD 301B (Maischak, Noack ID: 180326EJ AST18175, 2018). In addition, it is worthy of mention that there was no significant decrease in the mass balances of an adsorption / desorption study according to OECD 106 recently conducted with another cationic amine derivative (Goller, Noack ID: 170524EJ CAD18111, 2018). The test item used in the last-mentioned study is not readily biodegradable as shown in a headspace test according to OECD 310 (Maischak, Noack ID: 170524EJ AHT18110, 2018). For this reason, it is more likely that biodegradation is responsible for the decreasing mass balances and the nonlinear adsorption behaviour.
Furthermore, no distribution coefficients Kdes were determined because the test item concentrations in the soils should decrease during the course of the experiment due to biodegradation. Therefore, no reference point for the calculation of the endpoints was available. The measured low concentrations in the aqueous phase at the end of the desorption experiment show that desorption is not relevant.
Only organic carbon normalized distribution coefficients Koc for the highest application level (K1) could be derived because the direct analytical method (parallel analysis of test vessel adsorption, test item concentration in the aqueous phase and soil) was applied. Values ranged from 45361 to 183082 mL/g with a geometric mean value of 98478 mL/g. For the distribution coefficient Kd a geometric mean value of 915 mL/g was derived.The test item adsorbs to all tested soils with Koc values > 5000 and is therefore immobile in soils according to McCall et al.
Cationic surfactants adsorb to soil or sediment mainly via ionic interaction with negatively charged surfaces and there is poor correlation between adsorption and organic carbon content. Hence, sorption should not be normalized to organic matter and it is better to rely on Kd rather than Koc. When organic matter is not determining the distribution in soil, sediment and suspended sediment there is no difference in adsorption to these three compartments (based on dry weight) as the organic matter content is the only variable. Therefore, it was considered to be more relevant to use the mean Kd value of 915.22 L/kg to further calculate the partition coeffcients of soil-water, sediment-water and suspended-sediment matter.
Key value for chemical safety assessment
Other adsorption coefficients
- Type:
- log Kp (solids-water in soil)
- Value in L/kg:
- 3.14
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in sediment)
- Value in L/kg:
- 2.66
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in suspended matter)
- Value in L/kg:
- 2.36
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in raw sewage sludge)
- Value in L/kg:
- 1.44
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in settled sewage sludge)
- Value in L/kg:
- 1.44
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in activated sewage sludge)
- Value in L/kg:
- 1.44
- at the temperature of:
- 20 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in effluent sewage sludge)
- Value in L/kg:
- 1.44
- at the temperature of:
- 20 °C
Additional information
The adsorption / desorption behavior of the test item C16 Alkylamidopropyltrimethylammonium Chloride was investigated in five different soils according to OECD guideline 106 and Council Regulation (EC) No. 440/2008, C.18. Distribution coefficients Kd and organic carbon normalized distribution coefficients Koc were determined with a single concentration. Furthermore, investigations about the desorption behaviour and the degree of the adsorption as a function of the test item loading level (Freundlich adsorption isotherms) in the aqueous phase were performed. No endpoints could be reliably derived for these experiments due to the reasons given below. The test item was analysed by LC-MS/MS. Relevant properties of the used soils are given in Table 1. Experiments for adsorption and desorption kinetics were conductedwith a nominal test item concentration of 2 mg test item/L (K1). Additional concentrationsof 1, 0.2, 0.1 and 0.02 mg test item/L (K2 – K5) were used for the determination of the Freundlich adsorption isotherms.
Table1: Relevant Characteristics of Test Matrices
|
Soils |
||||
|
LUFA 2.1 |
LUFA 2.2 |
LUFA 2.3 |
LUFA 2.4 |
LUFA 5M |
batch |
F2.1 2817 |
F2.2 4016 |
F2.3 4116 |
F2.4 4116 |
F5M 5015 |
Soil Type1) |
Silty sand |
Loamy sand |
Silty sand |
Clayey loam |
Loamy sand |
pH (0.01 M CaCl2)3) |
4.9 |
5.4 |
5.9 |
7.4 |
7.3 |
Organic Carbon [%]2) |
0.718 |
1.47 |
0.412 |
1.74 |
0.916 |
Clay (<0.002 mm) [%]2) |
4.1 |
8.5 |
8.6 |
25.2 |
10.2 |
Silt (0.002-0.063 mm) [%]2) |
10.5 |
11.3 |
29.3 |
42.3 |
31.1 |
Sand (0.063-2 mm) [%]2) |
85.4 |
80.2 |
62.1 |
32.6 |
58.7 |
Cation Exchange Capacity [mval/100g]2) |
2.4 |
7.6 |
4.9 |
22 |
10 |
1)according to German DIN
2)determined at Agrolab Agrar und Umwelt GmbH (non-GLP)
3) Analyses data sheet provided by LUFA
Results of Tier 1
Tier 1– Test Vessel Adsorption
Experiments in tier 1 showed that the test item is prone for adsorption to the vessel surfaces of the polypropylene centrifugation tubes. Test item controls (the test item dissolved and agitated in the test vessel without soil) prepared in0.01 M CaCl2 or in soil eluates of LUFA 2.2 and LUFA 2.4 showed a test vessel adsorption of approximately 10%. For this reason, no test item controls were prepared and analysed during the further experiments because being useless for the interpretation and assessment of the study results. In addition, the test vessel adsorption in soil suspension of all soils was determined. Two different soil / solution ratios (1:10 and 1:40) were tested with the soils LUFA 2.2 and LUFA 2.4 for this purpose. The test vessel adsorption was lower in the samples with the higher soil /solution ratio. A soil / solution ratio of 1:10 was used for the further experiments during this study. The test vessel adsorption ranged from 0.6 to 3.3% under this condition for all tested soils.
Tier 1– Adsorption Kinetics
The test item depletion of the test item in the aqueous phase in soil suspensions with a soil / solution of 1:10 was nearly quantitative within 2 hours of the experiments with the soils LUFA 2.2 and LUFA 2.4. These results were obtained by the indirect method; only the concentration of the test item in the aqueous phase was determined. An agitation time of 24 hours was used for the adsorption kinetic experiments in tier 2 based on these experiments. The agitation time was reduced to 4 hours during the experiments for the adsorption isotherms in all soils except for the soil LUFA 2.1.
Tier 1– Parental Mass Balance
The parental mass balance for the test item was determined in all soils with an application concentration of 2 mg/L, a soil / solution ratio of 1:10 and after an agitation time of 4 hours for the soils LUFA 2.2, 2.3, 2.4 and 5M. 24 hours of agitation were used for the soil LUFA 2.1. The parental mass balances were finally calculated by taking into account the test item recovery on the test vessel surfaces, in the aqueous phase and in the soil. The extraction method for soil was optimized prior to these experiments by preparing samples in the soil LUFA 2.4. This soil was used for this purpose because this soil has the highest amount of organic carbon and clay. These parameters have a significant impact on the adsorption of organic compounds in soils. In general, high values for these parameters are responsible for high adsorption and fast / increased formation of non-extractable residues (NERs). A harsh extraction with an accelerated solvent extractor (ASE) was finally used for extraction of the test item It is more likely to obtain the best extraction efficiency with an ASE for aged samples than with an extraction at ambient temperature because the ASE extraction uses a combination of elevated temperature and pressure. Further experiments during method development indicated a decline of test item recovery in extracts of aged soil samples. Mass balances between 57 and 92% were obtained.
Results Tier 2– Adsorption Kinetics
These experiments confirmed the results of tier 1. The test item depletion in the aqueous phase ranged from 96 to 99% after 24 hours of agitation. Only the aqueous phase was analysed during these experiments. It was decided to waive further analysis of the aqueous phase during the determination of the adsorption isotherms during tier 3 based on these results. The concentrations of the test item in the aqueous phase were often in the lower range of the calibration with only low dilution factors. In consequence, concentrations lower than the lowest calibration level would have been obtained in the lower application concentrations during the determination of the adsorption isotherms. For this reason, the measurement of theses samples was useless for the determination of the adsorption isotherms.
ResultsTier 3
ResultsTier 3– Desorption Kinetics
Only samples of the aqueous phase were analysed for this purpose. Test item concentrations in the aqueous phase lower than 1% related to the applied test item amount (2 mg test item/L) were determined in the desorption kinetic experiments. The desorption is negligible under the used experimental conditions (24 hours adsorption and 48 hours desorption). Therefore, no experiments for the determination of the desorption isotherms were conducted.
ResultsTier 3– Adsorption Isotherms
Analysis during the determination of the adsorption isotherms were performed by analysing soil extracts of all concentration levels. The concentrations in the aqueous phase were calculated from the corresponding data of the adsorption kinetics and extrapolating the adsorption in % also to the lower concentration levels based on the assumption that the adsorption behavior is linear. Table 2 presents the obtained data.
Table2: Freundlich Adsorption Isotherms
Applied test item concentrations: 2, 1, 0.2, 0.1, 0.02 mg/L
Volume of aqueous phase: 40 mL
Soil Type |
msoil[g] |
r2 |
1/n |
KFads |
KFOC |
LUFA 2.1 |
3.88 |
0.995 |
1.47 |
3243 |
451638 |
LUFA 2.2 |
3.71 |
0.997 |
1.14 |
1121 |
76255 |
LUFA 2.3 |
3.84 |
0.997 |
1.20 |
1340 |
325155 |
LUFA 2.4 |
3.62 |
0.995 |
1.10 |
2460 |
141384 |
LUFA 5M |
3.70 |
0.992 |
1.11 |
2582 |
281835 |
msoil =
used amount of soil (dry weight) [g]
n = regression constant
KFads = Freundlich adsorption coefficient [µg1-1/n(mL)1/ng-1]
KFOC = Freundlich adsorption coefficient normalized to content of organic carbon [µg1-1/n(mL)1/ng-1]
A further assessment for the results of these experiments was performed because the values for the inverse regression constant 1/n (slope of the linear regression) were not plausible. These values were ≥ 1.1 and are not between 0.7 and 1 as expected for a Freundlich adsorption behavior. Furthermore, a strong decrease of the extracted test item amount from the soils was observed towards the lower application concentrations. This fact is in accordance to the implausible values for the inverse regression constants 1/n indicating a significant nonlinear adsorption behaviour. For this reason, individual organic carbon normalized distribution coefficients Koc were calculated (see Table 3) per application level and for all soils and compared with the organic carbon normalised Freundlich adsorption coefficients KFoc. Table 3 indicates that the organic carbon normalized distribution coefficients Koc are lower than the corresponding organic carbon normalised Freundlich adsorption coefficients KFoc. Furthermore, a decrease of these values towards the lower application levels was determined. These data clearly indicate that the adsorption is significantly nonlinear.
Table3: Individual organic carbon normalized Distribution Coefficients Koc
Applied test item concentrations: 2, 1, 0.2, 0.1, 0.02 mg/L
Volume of aqueous phase: 40 mL
Application Level
|
Koc |
||||
LUFA 2.1 |
LUFA 2.2 |
LUFA 2.3 |
LUFA 2.4 |
LUFA 5M |
|
K1 |
77057 |
45361 |
151587 |
95475 |
183082 |
K2 |
57954 |
42678 |
149890 |
86546 |
171219 |
K3 |
18510 |
37103 |
95755 |
62844 |
105760 |
K4 |
15737 |
25591 |
76229 |
66114 |
105856 |
K5 |
9870 |
25420 |
68902 |
62717 |
123801 |
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.