Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 275-809-7 | CAS number: 71662-46-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Bioaccumulation: aquatic / sediment
Administrative data
Link to relevant study record(s)
- Endpoint:
- bioaccumulation in aquatic species: fish
- Type of information:
- (Q)SAR
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- 1. SOFTWARE
EPISuite (v4.11)
2. MODEL (incl. version number)
BCFBAF v3.01
3. SMILES OR OTHER IDENTIFIERS USED AS INPUT FOR THE MODEL
CAS-No:71662-46-9
Chem:1,2-Benzenedicarboxylic acid, di-C8-10-alkyl esters
- CCCCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCC
- CCCCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCCCC
- CCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCC
4. SCIENTIFIC VALIDITY OF THE (Q)SAR MODEL
A reliable QSAR model was used to calculate the bioaccumulation potential of the isomers of 1,2-Benzenedicarboxylic acid, di-C8-10-alkyl esters. BCF values were calculated using the BCFBAF v3.01 module embedded within the EPISuite v4.11 computer model.
EPISuite and its modules (including BCFBAF) have been utilized by the scientific community for pr ediction of phys/chem properties and environmental fate and effect properties since the 1990’s. The program underwent a comprehensive review by a panel of the US EPA’s independent Science A dvisory Board (SAB) in 2007. The SAB summarized that the EPA used sound science to develop and refine EPISuite. The SAB also stated that the property estimation routines (PERs) satisfy the Organization for Economic Cooperation and Development (OECD) principles established for qu antitative structure-activity relationship ((Q)SAR) validation. The EPISuite modules (including BCF BAF) have been incorporated into the OECD Toolbox. Inclusion in the OECD toolbox requires specific documentation, validation and acceptability criteria and subjects EPISuite to international use, review, providing a means for receiving additional and on-going input for improvements. BCFB AF is listed as one of the QSARs for use in predicting bioaccumulation values in the Guidance on in formation requirements and chemical safety assessment Chapter R.7c: Endpoint specific guidance. In summary, the EPISuite modules (including BCFBAF) have had their scientific validity established repeatedly. https://www.epa.gov/tsca-screening-tools/epi-suitetm-estimation-program-interface
- Defined endpoint and unambiguous algorithm: BCFBAF v3.01 comprises the three following models:
(1) Regression-based BCF model (based on Meylan et al., 1997; Meylan et al., 1999)
The original estimation methodology used by the original BCFWIN program is described in a documen t prepared for the U.S. Environmental Protection Agency (Meylan et al., 1997). The estimation meth odology was then published in journal article (Meylan et al, 1999). The BCFBAF Program updated the BCF estimation methodology of the BCFWIN program by using an updated and better evaluated BCF database for selecting training and validation datasets. The exact same regression methodology used to derive the original BCFWIN method was used to derive the BCFBAF method for estimating BCF. The BCFBAF method classifies a compound as either ionic or non-ionic. Non-Ionic compounds are separated into three divisions by Log Kow value (Log Kow < 1.0, Log Kow 1.0-7.0, Log Kow > 7.0). For each division, a "best-fit" straight line was derived by common statistical regression methodology.
For Log Kow 1.0 to 7.0 the derived QSAR estimation equation is:
Log BCF = 0.6598 Log Kow - 0.333 + Σ correction factors (n = 396, r2 = 0.792, Q2 = 0.78, std dev = 0.511, avg dev = 0.395)
For Log Kow > 7.0 the derived QSAR estimation equation is:
Log BCF = -0.49 Log Kow + 7.554 + Σ correction factors (n = 35, r2 = 0.634, Q2 = 0.57, std dev = 0.538, avg dev = 0.396)
For Log Kow < 1.0 the derived QSAR estimation equation is: All compounds with a log Kow of less t han 1.0 are assigned an estimated log BCF of 0.50.
(2) Biotransformation rate model (Arnot et al., 2008b)
The final multiple-linear regression-derived equation (which is used by the BCFBAF program to estimate the kM Biotransformation Half-Life) is:
Log kM/Half-Life (in days) = 0.30734215*LogKow - 0.0025643319*MolWt - 1.53706847 + Σ(Fi*ni) where LogKow is the log octanol-water partition coefficient, MolWt is the Molecular Weight, and Σ(Fi* ni) is the summation of the individual Fragment coefficient values (Fi) times the number of times the individual fragment occurs in the structure ( ni). The -1.53706847 is the equation constant.
(3) Arnot-Gobas BAF-BAF
The Arnot and Gobas (2003) food web bioaccumulation model is a simple, single mass-balance equation. The model requires few input parameters (i.e. only Kow and metabolic transformation rate, if available – the default is zero), and derives the BAF as the ratio of the substance concentration in an upper trophic level organism and the total substance concentration in unfiltered water (it also estimates an overall biomagnification factor for the food web). It accounts for the rates of substance uptake and elimination (a number of simple relationships have been developed to estimate the rate constants for organic substances in fish from Gobas, 1993), and specifically includes bioavailability considerations. The BAF and BCF values for the 3 general trophic positions of fish (upper, middle, and lower) are derived using the BAF-QSAR model calibration methods (Arnot and Gobas, 2003).
- Defined domain of applicability:
Currently there is no universally accepted definition of model domain, for model (1) Regression- based BCF model (based on Meylan et al., 1997; Meylan et al., 1999) and (2) Biotransformation rate model (Arnot et al., 2008b). However, the documentation does provide information for reliability of the calculations. Estimates will possibly be less accurate for compounds outside the MW and logKow ranges of the training set compounds, and/or that have more instances of a given fragment than the maximum for all training set compounds. It is also possible that a compound may have a functional group(s) or other structural features not represented in the training set, and for which no fragment coefficient was developed; and that a compound has none of the fragments in the model’s fragment library.
The following MW and logKow ranges are covered by the individual models:
(1) Molecular Weight range (non-ionic): 68.08 - 959.17 Log Kow range (non-ionic): (-1.37) - 11.26
(2) Molecular Weight range: 68.08 - 959.17 Log Kow range: 0.31 – 8.70
For the (3) Arnot-Gobas BAF-BAF model predictions may be highly uncertain for chemicals that have estimated log KOW values > 9. The model is not recommended for chemicals that appreciably ionize, for pigments and dyes, or for perfluorinated substances.
- Appropriate measures of goodness-of-fit and robustness and predictivity: (1)The Regression-based BCF model had the following statistics:
Training Set Accuracy: n=527 (466 Non-Ionic Compounds and 61 Ionic), r²=0.833; Validation Set Accuracy: n=158, r²=0.82
(2) The biotransformation rate model has the following statistics: Training Set Accuracy: n=421, r2=0.821; Validation Set accuracy: n=211, r2=0.734
(3) The Arnot-Gobas BAF-BAF model may not adequately capture biotransformation at the first tro phic level for chemicals that are readily biotransformed in invertebrates and plankton. The BAF cal culations were derived from the parameterization and calibration of the model to a large database of measured BAF values from the Great Lakes (Lake Ontario, Lake Erie and Lake St. Clair). The measured BAFs are for chemicals that are poorly metabolized. Therefore, in the absence of metabo lic biotransformation the BAF model predictions are in general agreement with measured BAFs in fish of these general trophic positions from the Great Lakes for chemicals that are poorly metabolized.
5. APPLICABILITY DOMAIN
As described above, according to the BCFBAF documentation, there is currently no universally accepted definition of model domain for any of the three models. In general, the intended application domain for all models embedded in EPISuite is organic chemical. Specific compound classes, besides organic chemicals, require additional correction factors. Indicators for the general applicability of the BCFBAF model are the logKow value of the target substance, the molecular weight of the target substance and the identified number of individual fragments in comparison to the training set.
(1) The molecular weight range of the 1,2-Benzenedicarboxylic acid, di-C8-10- alkyl ester isomers is 390 - 447, which falls within the range of the training set (68.08 - 959.17) for the regression-based model. With estimated logKow values of 8.54, 9.52 and 10.50 all isomers are within the training set range ((-1.37) - 11.26). A correction factor of -0.596 for alkyl chains of greater than 8 CH2-groups has been applied for all three isomers. Since no correction factor are applied for substances with a logKow > 10, the experimental logKow for the C10-C10 isomer (9.05) has been used.
Equation Used to Make BCF estimate: Log BCF = -0.49 log Kow + 7.554 + Correction
Correction(s): Value
Alkyl chains (8+ -CH2- groups) -0.596
Estimated Log BCF = 2.292 (BCF = 196 L/kg wet-wt) [C8-C10 isomer]
Estimated Log BCF = 2.523 (BCF = 333.4 L/kg wet-wt) [C10-C10 isomer]
Estimated Log BCF = 2.773 (BCF = 592.8 L/kg wet-wt) [C8-C8 isomer]
The 1,2-Benzenedicarboxylic acid, di-C8-10- alkyl ester isomers are inside the given MW and logKow ranges, the calculated BCF values can be considered indicative of low bioaccumulation potential. Especially considering that the BCF decreases for compounds with high logKow values (see model documentation and ECHA Guidance Document Chapter R.11: PBT/vPvB assessment Version 3.0 – June 2017 Appendix R.11—1 Annex 1).
(2) The molecular weight of the 1,2-Benzenedicarboxylic acid, di-C8-10- alkyl ester isomers is within the range of 390 – 447 and therefore within the range of the training set of model (2), but for two of the isomers (C8-C10 and C10-10), the logKow values are outside of the training set range (0.31 – 8.70). The biotransformation rate estimates given below show that all fragments of the isomers were identified and the number of individual fragments did not exceed the maximum number of each fragment in any of the training set compounds:
Whole Body Primary Biotransformation Rate Estimate for Fish
TYPE | (max)NUM | LOG BIOTRANSFORMATION FRAGMENT DESCRIPTION | COEFF | VALUE
------+-----+--------------------------------------------+---------+---------
Frag | 2 | Linear C4 terminal chain [CCC-CH3] | 0.0341 | 0.0682
Frag | 2 | Ester [-C(=O)-O-C] | -0.7605 | -1.5211
Frag | 4 | Aromatic-H | 0.2664 | 1.0655
Frag | 2 | Methyl [-CH3] | 0.2451 | 0.4902
Frag | 18 | -CH2- [linear] | 0.0242 | 0.3870
Frag | 1 | Benzene | -0.4277 | -0.4277
Biotransformation Half-Life (days) : 2.39 (normalized to 10 g fish) [C8-C10 isomer]
Biotransformation Half-Life (days) : 1.62 (normalized to 10 g fish) [C10-C10 isomer]
Biotransformation Half-Life (days) : 1.26 (normalized to 10 g fish) [C8-C8 isomer]
In regard to the (3) Arnot-Gobas BAF-BCF model, the calculated BCF and BAF values for two of the 1,2-Benzenedicarboxylic acid, di-C8-10- alkyl ester isomers will not be accurate, as the logKow of the molecules is greater than 9 (C8-C10 isomer and C10-C10 isomer). But considering that the 1,2-Benzenedicarboxylic acid, di-C8-10- alkyl ester isomers are expected to be subject to rapid metabolic biotransformation, the estimates will therefore be overly conservative and will most likely overestimate the bioaccumulation potential.
Arnot-Gobas BCF & BAF Methods (including biotransformation rate estimates):
Estimated Log BCF (upper trophic) = 0.042 (BCF = 1.101 L/kg wet-wt) [C8-C10]
Estimated Log BCF (upper trophic) = 0.573 (BCF = 3.743 L/kg wet-wt) [C10-C10]
Estimated Log BCF (upper trophic) = 0.903 (BCF = 7.993 L/kg wet-wt) [C8-C8]
Thus the results can be considered indicative for low or no bioaccumulation potential.
6. ADEQUACY OF THE RESULT
The above specified correlation coefficients indicate the calculated results are equivalent to those generated experimentally and are, hence, adequate for the purpose of classification and labelling and/or risk assessment. Taking into account the molecular structure and respective degradability and metabolism, the obtained results can be considered indicative for low or no bioaccumulation potential.
The BCFBAF predicted bioaccumulation values are therefore considered valid and fit for purpose.
7. BIBLIOGRAPHY
Arnot JA, Mackay D, Bonnell M. 2008b. Estimating metabolic biotransformation rates in fish from laboratory data. Environmental Toxicology and Chemistry 27: 341-351.
Arnot JA, Gobas FAPC. 2003. A generic QSAR for assessing the bioaccumulation potential of organic chemicals in aquatic food webs. QSAR and Combinatorial Science 22: 337-345.
Arnot, J.A. and F.A.P.C. Gobas. 2006. A review of bioconcentration factor (BCF) and bioaccumulation factor (BAF) assessments for organic chemicals in aquatic organisms. Environmental reviews 14(4): 257-297.
Arnot JA, Meylan W, Tunkel J, Howard PH, Mackay D, Bonnell M, Boethling RS. 2009. A QSAR for predicting metabolic biotransformation rates for organic chemicals in fish. Environmental Toxicology and Chemistry. 28: in press.
Meylan, W.M., Howard, P.H, Aronson, D., Printup, H. and S. Gouchie. 1997. "Improved Method for Estimating Bioconcentration Factor (BCF) from Octanol-Water Partition Coefficient", SRC TR-97-006 (2nd Update), July 22, 1997; prepared for: Robert S. Boethling, EPA-OPPT, Washington, DC; Contract No. 68-D5-0012; prepared by: ; Syracuse Research Corp., Environmental Science Center, 6225 Running Ridge Road, North Syracuse, NY 13212.
Meylan,WM, Howard,PH, Boethling,RS et al. 1999. Improved Method for Estimating
Bioconcentration / Bioaccumulation Factor from Octanol/Water Partition Coefficient. Environ. Toxicol. Chem. 18(4): 664-672 (1999).ECHA (2012) “Guidance on information requirements and chemical safety assessment Chapter R.7b: Endpoint specific guidance”.
McFarland, M. et al. 2007. “Science Advisory Board (SAB) Review of the Estimation Programs Interface Suite (EPI SuiteTM)”. - Guideline:
- other: REACH Guidance on QSARs R.6
- Principles of method if other than guideline:
- The BCFBAF v3.01 module embedded within the EPISuite (v4.11) computer model was used.
Arnot JA, Mackay D, Bonnell M. 2008b. Estimating metabolic biotransformation rates in fish from laboratory data. Environmental Toxicology and Chemistry 27: 341-351.
Arnot JA, Gobas FAPC. 2003. A generic QSAR for assessing the bioaccumulation potential of organic chemicals in aquatic food webs. QSAR and Combinatorial Science 22: 337-345.
Arnot, J.A. and F.A.P.C. Gobas. 2006. A review of bioconcentration factor (BCF) and bioaccumulation factor (BAF) assessments for organic chemicals in aquatic organisms. Environmental reviews 14(4): 257-297.
Arnot JA, Meylan W, Tunkel J, Howard PH, Mackay D, Bonnell M, Boethling RS. 2009. A QSAR for predicting metabolic biotransformation rates for organic chemicals in fish. Environmental Toxicology and Chemistry. 28: in press.
Meylan, W.M., Howard, P.H, Aronson, D., Printup, H. and S. Gouchie. 1997. "Improved Method for Estimating Bioconcentration Factor (BCF) from Octanol-Water Partition Coefficient", SRC TR-97-00 6 (2nd Update), July 22, 1997; prepared for: Robert S. Boethling, EPA-OPPT, Washington, DC; Contract No. 68-D5-0012; prepared by: ; Syracuse Research Corp., Environmental Science Center, 6225 Running Ridge Road, North Syracuse, NY 13212.
Meylan,WM, Howard,PH, Boethling,RS et al. 1999. Improved Method for Estimating Bioconc entration / Bioaccumulation Factor from Octanol/Water Partition Coefficient. Environ. Toxicol. Chem
. 18(4): 664-672 (1999).ECHA (2012) “Guidance on information requirements and chemical safety assessment Chapter R.7b: Endpoint specific guidance”.
McFarland, M. et al. 2007. “Science Advisory Board (SAB) Review of the Estimation Programs Interface Suite (EPI SuiteTM)”. - Specific details on test material used for the study:
- SMILES: CCCCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCC, CCCCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCCCC, and CCCCCCCCOC(=O)c1ccccc1C(=O)OCCCCCCCC.
- Test organisms (species):
- other: Model based on fish data
- Type:
- BCF
- Value:
- 7.993 L/kg
- Basis:
- other: BCF for C8-C10 isomer
- Remarks on result:
- other: QSAR (BCFBAF v3.01, Arnot-Gobas, 2003)
- Key result
- Type:
- BCF
- Value:
- 333.4 L/kg
- Basis:
- other: BCF for C10-C10 isomer
- Remarks on result:
- other: QSAR (BCFBAF v3.01, regression-based model)
- Type:
- BCF
- Value:
- 196 L/kg
- Basis:
- other: BCF for C8-C8 isomer
- Remarks on result:
- other: QSAR (BCFBAF v3.10, regression-based model)
- Details on kinetic parameters:
- Biotransformation Rate Constant:
kM (Rate Constant): 0.4001 /day (10 gram fish)
kM (Rate Constant): 0.225 /day (100 gram fish)
kM (Rate Constant): 0.1265 /day (1 kg fish)
kM (Rate Constant): 0.07115 /day (10 kg fish) - Metabolites:
- ===========================================================
Whole Body Primary Biotransformation Rate Estimate for Fish:
===========================================================
TYPE | NUM | LOG BIOTRANSFORMATION | FRAGMENT DESCRIPTION| COEFF | VALUE
Frag | 2 | Linear C4 terminal chain [CCC-CH3] | 0.0341 | 0.0682
Frag | 2 | Ester [-C(=O)-O-C] | -0.7605 | -1.5211
Frag | 4 | Aromatic -H | 0.2664 | 1.0655
Frag | 2 | Methyl [-CH3] | 0.2451 | 0.4902
Frag | 15 | -CH2- [linear] | 0.0242 | 0.3628
Frag | 1 | Benzene | -0.4277 | -0.4277
L Kow | * | Log Kow = 9.03 (KowWin estimate) | 0.3073 | 2.7753
MolWt | * | Molecular Weight Parameter | | -1.0375
Const | * | Equation Constant | | -1.5371
============+============================================+=========+========= - Executive summary:
A reliable QSAR model was used to calculate the bioaccumulation potential of the 1,2-Benzenedicarboxylic acid, di-C8-10-alkyl esters. BCF values were calculated for each of the isomers using the BCFBAF v3.01 module embedded within the EPISuite (v4.11) computer model.
Reference
Based on the calculated logKow value (KOWWIN) of > 10 (10.5) being outside the logKow range, the correction factor for “Alkyl chains (8+ CH2 groups) logKow 7-10” of -0.5965 was not applied. Therefore a second calculation with a generic logKow of 10 was performed, as the initial logKow is considered indicative but not as an absolute value. In combination with the existing experimental data for other category members, a logKow of equal or greater than 10 can be assumed. The results of the additional calculation are given below and further support the conclusion that 2-tetradecyloctadecan-1-ol has no or low bioaccumulation potential.
Description of key information
The highest BCF obtained with the Arnot-Gobas BCF & BAF Methods including biotransformation rate estimates (2003) was 7.993 L/kg wet-wt for the C8-C8 isomer.
As the logKow values for the other two isomers are outside the applicability domain of the Arnot-Gobas model, the more conservative BCF values derived with the regression-based BCF model are used, 196 L/kg wet-wt (C8 -C10 isomer) and 333.4 L/kg wet-wt (C10 -C10 isomer).
Key value for chemical safety assessment
- BCF (aquatic species):
- 333.4 L/kg ww
Additional information
A reliable QSAR model was used to calculate the bioaccumulation potential of the 1,2-Benzenedicarboxylic acid, di-C8-10-alkyl esters. BCF values were calculated for each of the isomers using the BCFBAF v3.01 module embedded within the EPISuite (v4.11) computer model.
Regression-based BCF model (based on Meylan et al., 1997; Meylan et al., 1999)
Estimated Log BCF = 2.292 (BCF = 196 L/kg wet-wt) [C8-C10 isomer]
Estimated Log BCF = 2.523 (BCF = 333.4 L/kg wet-wt) [C10-C10 isomer]
Estimated Log BCF = 2.773 (BCF = 592.8 L/kg wet-wt) [C8-C8 isomer]
Biotransformation rate model (Arnot et al., 2008b)
Biotransformation Half-Life (days) : 2.39 (normalized to 10 g fish) [C8-C10 isomer]
Biotransformation Half-Life (days) : 1.62 (normalized to 10 g fish) [C10-C10 isomer]
Biotransformation Half-Life (days) : 1.26 (normalized to 10 g fish) [C8-C8 isomer]
Arnot-Gobas BCF & BAF Methods including biotransformation rate estimates (2003):
Estimated Log BCF (upper trophic) = 0.042 (BCF = 1.101 L/kg wet-wt) [C8-C10]
Estimated Log BCF (upper trophic) = 0.573 (BCF = 3.743 L/kg wet-wt) [C10-C10]
Estimated Log BCF (upper trophic) = 0.903 (BCF = 7.993 L/kg wet-wt) [C8-C8]
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.