Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 805-659-5 | CAS number: 848820-98-4
Guidance on Safe Use
Administrative data
First-aid measures
General Information:
Symptoms of poisoning may even occur after several hours; therefore medical observation
at least 48 hours after the accident .
· After inhalation: In case of unconsciousness place patient stably in side position for transportation .
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact:
Flush eyes for several minutes under running water with eyelids open .
· After swallowing: Call a physician immediately.
Most important symptoms and effects, and delayed
No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Fire-fighting measures
Suitable extinguishing agents: Use fire fighting measures that suit the environment .
Special hazards arising from the substance or mixture Hazards
No further relevant information available.
Advice for firefighters
· Protective equipment: No special measures required.
Accidental release measures
Personal precautions, protective equipment and emergency
procedure to be followed
Not mandatory.
Environmental precautions:
Dilute with plenty of water.
Non / groundwater discharge into drains / surface water.
· Methods and material for containment and cleaning up:
Absorb with liquid- binding material (sand , diatomite, acid binders, universal binders, sawdust )
take up.
Dispose contaminated material as waste according to section 13 .
Ensure adequate ventilation .
Handling and storage
Precautions for safe handling
Ensure good ventilation / exhaustion at the workplace .
Prevent formation of aerosols .
· Information about fire and explosion protection: No special measures required.
Conditions for safe storage, including any incompatibilities
· Storage :
· Requirements to be met by storerooms and receptacles : No special requirements .
· Information about storage facility: Not required .
· Further information about storage conditions: None.
· Storage class
· Further information about storage conditions: None
· Specific No further relevant information available.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Limitation and monitoring of exposure
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Take off all contaminated clothing immediately.
Wash hands before breaks and at the end of workday.
Avoid contact with skin.
Avoid contact with skin and eyes.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device In case of intensive or longer exposure
use self-contained breathing apparatus.
Filter AX
· Protection of hands:
`Protective gloves
PVC gloves
Neoprene gloves
The glove material has to be impermeable and resistant to the product / the substance / the
Its preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and
the degradation.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further
Marks of quality and varies from manufacturer to manufacturer. As the product is a
Represents preparation of several substances, the resistance of the glove material can not
anticipated and should be checked before use.
· Penetration time of glove material
The exact break trough time has to be obtained from the protective glove manufacturer and must be observed.
· Gloves are suitable for the following materials For the permanent contact:
PVC gloves
· For the permanent contact gloves are a maximum of 15 minutes following materials
suitable:
PVC gloves
· Eye protection: Safety glasses
Stability and reactivity
Reactivity
chemical Stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications .
Possibility of hazardous reactions No dangerous reactions known .
Available Conditions to avoid No further relevant information .
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No hazardous decomposition products known.
Disposal considerations
Waste Treatment Methods
· Recommendation :
Must not be disposed together with household garbage . Do not empty into drains .
· Contaminated packaging:
· Recommendation : Disposal must be made according to official regulations.
· Recommended cleansing agent : Water, if necessary together with cleansing agents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
