Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-938-7 | CAS number: 72716-26-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
SKIN IRRITATION
Skin corrosion: Not corrosive (in vitro), OECD 431, EU Method B40.Bis, Kiss 2012a.
Skin irritation: Not irritating (in vitro), OECD 439, EU Method B.46, Kiss 2012b.
EYE IRRITATION
Eye irritation: Should not be clasified (in vitro), OECD 438, EU Method B.48, Kiss 2012c.
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 09 May 2012 to 11 May 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Details on animal used as source of test system:
- Skin Samples
- Model: EPISKIN-SM.
- Source: SkinEthic, France, Batch No.:12-EKIN-015, Expiry Date: 14 April 2012.
- Quality control: All biological components of the epidermis and the kit culture medium have been tested for the presence of viruses, bacteria and mycoplasma. The quality of the final product is assessed by undertaking an MTT cell viability test and a cytotoxicity test with sodium dodecylsulphate (SDS). The EPISKIN kit received was checked for pH and to verity that the kit had not been exposed to temperatures above 40 °C during transport; the kit was found to be in good order.
- Storage: The EPISKIN kit was kept in their packaging at 37 °C and the assay medium supplied with the kit was stored at 2-8°C until test initiation. - Vehicle:
- unchanged (no vehicle)
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 20 mg. - Duration of treatment / exposure:
- 15 minutes
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- mean
- Value:
- 88
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- CELL VIABILITY
- The viability results of the test material treated disks was 88 % of the negative control, since this is > 50 % of the negative control the test material is considered to be a non-irritant.
VALIDITY OF THE TEST
The mean OD value of the three negative control tissues was 0.756. The positive control result showed a mean of 6.9 % viability. Each standard deviation value (SD) of the % viability was below 18. All validity criteria were within acceptable limits and therefore the study can be considered as valid.
INDICATOR FOR POTENTIAL FALSE VIABILITY
> Possible direct MTT reduction with the test material: No colour change was observed after three hours of incubation of the test item in MTT solution. The test material did not interact with the MTT, therefore additional controls and data calculations were not necessary. A false estimation of viability due the MTT interaction can be precluded.
> Colouring potential of the test material: As the test material is coloured, one additional chemical-treated tissue was used for the non specific OD evaluation. Optical Density (measured at 540 nm) of this tissue was determined as 0.034, Non Specific Colour % was calculated as 4.5 %, below the threshold of 50 %. Therefore additional data calculation was not necessary. - Interpretation of results:
- other: not irritating according to EU criteria
- Conclusions:
- Under the conditions of the test, the results indicate that the test material is not a skin irritant.
- Executive summary:
The potential for the test material to cause skin irritation was predicted in vitro using the EPISKIN Model in a study conducted under GLP conditions and in line with OECD 439 and EU Method B.46. The test material was applied topically to the surface of the skin for 15 minutes, which was terminated by rinsing with PBS 1 x solution (0.9 %). Epidermis units were then incubated at 37 °C for 42 hours in an incubator with 5 % CO2. The viability of each disk was assessed by incubating the tissues for 3 hours with MTT solution at 37 °C in 5 % CO2 protected from light. The formazan extract in acidified isopropanol was then spectrophotometrically evaluated for optical density (OD) and quantified. Positive and negative controls were run concurrently and tissue viability was expressed as a % relative to the negative control.
Under the conditions of the study, exposure to the test material resulted in a mean relative cell viability of 88 %. Since the cell viability was determined to be > 50 % of the negative control the test material was considered to be non-irritating.
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 12 April 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 431 (In Vitro Skin Corrosion: Human Skin Model Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: EU Method B.40Bis. (In Vitro Skin Corrosion: Human Skin Model Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Justification for test system used:
- Recommended in international guidelines
- Details on test system:
- Skin Samples
- Model: EPISKIN-SM.
- Source: SkinEthic, France, Batch No.:12-EKIN-015, Expiry Date: 16 April 2012.
- Quality control: All biological components of the epidermis and the kit culture medium have been tested for the presence of viruses, bacteria and mycoplasma. The quality of the final product is assessed by undertaking an MTT cell viability test and a cytotoxicity test with sodium dodecylsulphate (SDS). The EPISKIN kit received was checked for pH and to verity that the kit had not been exposed to temperatures above 40 °C during transport; the kit was found to be in good order.
- Storage: The EPISKIN kit was kept in their packaging at 37 °C and the assay medium supplied with the kit was stored at 2-8°C until test initiation. - Vehicle:
- unchanged (no vehicle)
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 20 mg. - Duration of treatment / exposure:
- 4 hours
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- mean
- Value:
- 98
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- CELL VIABILITY
- The viability results of the test material treated disks was 98 % of the negative control, since this is > 35 % of the negative control the test material is considered to be non-corrosive.
VALIDITY OF THE TEST
The mean OD value of the three negative control tissues was 0.253. The positive control result showed 8.3 % viability. All validity criteria were within acceptable limits and therefore the study can be considered as valid.
INDICATOR FOR POTENTIAL FALSE VIABILITY
> Possible direct MTT reduction with the test material: No colour change was observed after three hours of incubation of the test material in MTT solution. The test material did not interact with the MTT, therefore additional controls and data calculations were not necessary. A false estimation of viability can be precluded.
> Colouring potential of the test material: As the test material is coloured, one additional treated tissue was used for the non specific OD evaluation. Optical density (measured at 540 nm) of this tissue was determined as 0.073, Non Specific Colour % was calculated as 29%. Therefore additional data calculation was necessary. - Interpretation of results:
- other: not corrosive according to EU criteria
- Conclusions:
- Under the conditions of the test, the results indicate that the test material is not a skin corrosive.
- Executive summary:
The potential for the test material to cause skin corrosivity was predicted in vitro using the EPISKIN Model, in a study conducted under GLP conditions and in line with OECD 431 and EU Method B.40Bis. The test material was applied topically to the surface of the skin for 4 hours. Exposure was terminated by rinsing with PBS 1 x solution (0.9 %). The viability of each disk was assessed by incubating the tissues for 3 hours with MTT solution. The formazan precipitated was then extracted using acidified isopropanol and quantified spectrophotometrically. Positive and negative controls were run concurrently and tissue viability was expressed as a % relative to the negative control.
The mean cell viability, after adjustment for colour, was 98 % compared to the negative control. Since this was > 35 % the test material is considered to be non-corrosive. Therefore under the conditions of the test, the results indicate that the test material is not a skin corrosive.
Referenceopen allclose all
Table 1: Optical Density (OD) and the Calculated % Viability
Substance |
Optical Density (OD) |
Viability (%) |
|
Negative Control |
1 |
0.820 |
108 |
2 |
0.659 |
87 |
|
3 |
0.788 |
104 |
|
Mean |
0.756 |
100 |
|
(SD) |
|
11.15 |
|
Positive Control |
1 |
0.040 |
5.3 |
2 |
0.079 |
10 |
|
3 |
0.041 |
5.4 |
|
Mean |
0.053 |
6.9 |
|
(SD) |
|
2.69 |
|
Test Material |
1 |
0.721 |
95 |
2 |
0.536 |
71 |
|
3 |
0.746 |
99 |
|
Mean |
0.668 |
88 |
|
(SD) |
|
15.14 |
Table 1: Optical Density (OD) and the Calculated % Viability
Substance |
Optical Density (OD) |
OD after Adjustment* |
Viability (%) |
|
Negative Control |
1 |
0.315 |
|
100 |
2 |
0.238 |
|
||
3 |
0.206 |
|
||
Mean |
0.253 |
|
100 |
|
Positive Control |
1 |
0.015 |
|
5.9 |
2 |
0.035 |
|
14 |
|
3 |
0.013 |
|
5.1 |
|
Mean |
0.021 |
|
8.3 |
|
Test Material |
1 |
0.302 |
0.229 |
91 |
2 |
0.359 |
0.286 |
113 |
|
3 |
0.299 |
0.226 |
89 |
|
Mean |
0.247 |
98 |
* The test material had a residual colour which was expected to cause an OD of 0.073 in the final solutions. This was subtracted from the measured OD values.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 26 April 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 438 (Isolated Chicken Eye Test Method for Identifying Ocular Corrosives and Severe Irritants)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU method B.48 (Isolated chicken eye test method for identifying occular corrosives and severe irritants)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Species:
- chicken
- Strain:
- other: Ross 308
- Details on test animals or tissues and environmental conditions:
- Eye Samples:
- Species of chicken: Ross 308.
- Source: Taravis KFT. 9600 Sárvár, Rábasömjéni út. 129.
- Method: Chicken heads were collected after slaughter in a commercial abattoir from chickens which are used for human consumption. Heads were transported at ambient temperature. After collection, the heads were inspected for appropriate quality and wrapped with tissue paper moistened with saline, then stored in a closed plastic box (4-5 heads per box). - Vehicle:
- unchanged (no vehicle)
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 30 mg - Duration of treatment / exposure:
- Single application, removed after 10 seconds.
- Irritation parameter:
- cornea opacity score
- Run / experiment:
- mean
- Value:
- 2
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation parameter:
- fluorescein retention score
- Run / experiment:
- mean
- Value:
- 2
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation parameter:
- percent corneal swelling
- Run / experiment:
- mean up to 75 minutes
- Value:
- 1
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation parameter:
- percent corneal swelling
- Run / experiment:
- mean up to 240 minutes
- Value:
- 1
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- The results suggest that the test material is moderately irritating but not a severe irritant.
Controls:
The positive control imidazole was classed as severely irritating.
The negative control Sodium chloride (Salsol solution 0.9%) had no significant effects on the chicken eye in this study. - Interpretation of results:
- other: not irritating according to EU criteria
- Conclusions:
- Under the conditions of the test, the results suggest that the test material is moderately irritating.
- Executive summary:
An in vitro eye irritation study in isolated chicken eyes was conducted under GLP conditions and according to the OECD guideline 438 and EU Method B.48 to determine if the test material caused corrosion or severe eye irritation. Three chicken eyes were exposed to the test material (30 mg) for 10 seconds, rinsed with isotonic saline, and then assessed for irritation at intervals for up to 240 minutes. Toxic effects to the cornea were measured by a qualitative assessment of opacity, damage to epithelium based on application of fluorescein to the eye (fluorescein retention), and measurement of cornea thickness (swelling). Damage was assessed individually and then combined to derive an Eye Irritancy Classification. Positive and negative controls were run concurrently to assess the viability of the test system.
Under the conditions of the study, exposure to the test material resulted in an overall ICE class of 1 x I and 2 x III, which corresponds to a classification of moderately irritating in accordance with the OECD guideline. The results suggest that the test material is moderately irritating, but should not be classified as a severe eye irritant.
Reference
Table 4: Test Material Results
Observations |
Value |
ICE Class |
Mean maximum corneal swelling at up to 75 min |
1 % |
I |
Mean maximum corneal swelling at up to 240 min |
1 % |
I |
Mean maximum corneal opacity |
2.00 |
III |
Mean fluorescein retention |
2.00 |
III |
Other Observations |
The test material was stuck on the cornea surface after the post-treatment rinse. All corneal surfaces were cleared 75 minutes after the post-treatment rinse. |
|
Overall ICE Class |
1 x I, 2 x III |
Table 5: Positive Control Results
Observations |
Value |
ICE Class |
Mean maximum corneal swelling at up to 75 min |
3 % |
I |
Mean maximum corneal swelling at up to 240 min |
8 % |
II |
Mean maximum corneal opacity |
4.00 |
IV |
Mean fluorescein retention |
2.83 |
IV |
Other Observations |
The Imidazole was stuck on the cornea surface after the post treatment rinse. The cornea surface was not cleared 240 minutes after the post-treatment rinse. |
|
Overall ICE Class |
1 x II 2 x IV |
Table 6: Negative Control Results
Observations |
Value |
ICE Class |
Mean maximum corneal swelling at up to 75 min |
0 % |
I |
Mean maximum corneal swelling at up to 240 min |
0 % |
I |
Mean maximum corneal opacity |
0.00 |
I |
Mean fluorescein retention |
0.00 |
I |
Other Observations |
None |
|
Overall ICE Class |
3 x I |
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin Irritation
The potential for the test material to cause skin corrosion (Kiss, 2012a) was predicted in vitro using the EPISKIN Model, in a study conducted under GLP conditions and in line with OECD 431 and EU Method B.40Bis. The test material was applied topically to the surface of the skin for 4 hours. Exposure was terminated by rinsing with PBS 1 x solution (0.9 %). The viability of each disk was assessed by incubating the tissues for 3 hours with MTT solution. The formazan precipitated was then extracted using acidified isopropanol and quantified spectrophotometrically. Positive and negative controls were run concurrently and tissue viability was expressed as a % relative to the negative control.
The mean cell viability, after adjustment for colour, was 98 % compared to the negative control. Since this was > 35 % the test material is considered to be non-corrosive. Therefore under the conditions of the test, the results indicate that the test material is not a skin corrosive.
The potential for the test material to cause skin irritation (Kiss, 2012b) was predicted in vitro using the EPISKIN Model in a study conducted under GLP conditions and in line with OECD 439 and EU Method B.46. The test material was applied topically to the surface of the skin for 15 minutes, which was terminated by rinsing with PBS 1 x solution (0.9 %). Epidermis units were then incubated at 37 °C for 42 hours in an incubator with 5 % CO2. The viability of each disk was assessed by incubating the tissues for 3 hours with MTT solution at 37 °C in 5% CO2 protected from light. The formazan extract in acidified isopropanol was then spectrophotometrically evaluated for optical density (OD) and quantified. Positive and negative controls were run concurrently and tissue viability was expressed as a % relative to the negative control.
Under the conditions of the study, exposure to the test material resulted in a mean relative cell viability of 88 %. Since the cell viability was determined to be > 50 % of the negative control the test material was considered to be non-irritating.
Based on the results from the in vitro models the test material is considered to be non-irritating and non-corrosive to the skin. Both studies have been assigned a reliability score of 1 in line with the principles for assessing data quality as defined by Klimish (1997). The data is considered complete and sufficient for classification and labelling purposes.
Eye Irritation
In the key study (Kiss, 2012c), the potential of the test material to cause corrosion or severe eye irritation was determined in vitro in isolated chicken eyes. The study was conducted under GLP conditions and according to the OECD guideline 438 and EU Method B.48.
Three chicken eyes were exposed to the test material (30 mg) for 10 seconds, rinsed with isotonic saline, and then assessed for irritation at intervals for up to 240 minutes. Toxic effects to the cornea were measured by a qualitative assessment of opacity, damage to epithelium based on application of fluorescein to the eye (fluorescein retention), and measurement of cornea thickness (swelling). Damage was assessed individually and then combined to derive an Eye Irritancy Classification. Positive and negative controls were run concurrently to assess the viability of the test system.
Under the conditions of the study, exposure to the test material resulted in an overall ICE class of 1 x I and 2 x III, which corresponds to a classification of moderately irritating in accordance with the OECD guideline. The results suggest that the test material is moderately irritating, but should not be classified as a severe eye irritant.
Justification for classification or non-classification
Skin Irritation
According to the criteria outlined in Regulation (EC) No. 1272/2008, the test material does not meet the criteria for classification as a skin irritant.
Eye Irritation
In accordance with OECD guideline 438, the available information is sufficient to rule out a severe eye damage/irritation classification in accordance with Regulation (EC) No. 1272/2008. However, the study suggests that the test material is moderately irritating. In vitro data is not sufficient to determine a Category 2 classification, and further testing is beyond the requirements of an Annex VII Registration in accordance with Regulation (EC) No. 1907/2006.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.