Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 217-982-3 | CAS number: 2031-62-1
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- (Q)SAR
- Adequacy of study:
- supporting study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- QSAR prediction
- Principles of method if other than guideline:
- The result was obtained using an appropriate QSAR method (see attached QMRF and QPRF for details).
- Type:
- density
- Density:
- 0.9 g/cm³
- Temp.:
- 20 °C
- Type:
- relative density
- Density:
- 0.9 other: see remarks
- Remarks on result:
- other: Relative density is dimensionless
- Conclusions:
- A density value of 0.90 g/cm³ at 20 °C has been obtained for the test substance using an accepted calculation method. The result is considered reliable.
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 30-Jan-2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- 1.4.4
- Qualifier:
- according to guideline
- Guideline:
- other: DIN 51757
- GLP compliance:
- no
- Type of method:
- oscillating densitimeter
- Type:
- density
- Density:
- 0.837 g/cm³
- Temp.:
- 20 °C
- Type:
- relative density
- Density:
- 0.837 other: See remarks
- Temp.:
- 20 °C
- Remarks on result:
- other: Realtive density is dimensionless
- Conclusions:
- A relative density density value of 0.837, and a density value of 0.837 g/cm3 at 20 °C was determined in a reliable study conducted according to an appropriate test protocol. It was not compliant with GLP.
Referenceopen allclose all
Results
Measurement |
Density at 20 °C (g/cm3) |
Relative density D204* |
Test 1 |
0.83668 |
0.83671 |
Test 2 |
0.83665 |
0.83667 |
Mean value |
0.837 |
0.837 |
*The relative density D204 is the ratio between the measured density of the test substance at 20 °C and the density of water at 4 °C (= 0.99997 g/cm3). The relative density has no dimension.
Description of key information
Relative density: Diethoxy(methyl)silane: 0.837 at 20°C (oscillating
densitimeter, EC Methos A.3)
Key value for chemical safety assessment
- Relative density at 20C:
- 0.837
Additional information
A relative density value of 0.837 at 20°C was determined for the test substance according to EU Method A.3. This is supported by a predicted value of 0.90 g/cm³ at 20°C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
