Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 918-045-8 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2005-10-13 to 2005-06-07
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 005
- Report date:
- 2005
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- 5-[2-ethoxy-5-(4-methylpiperazin-1-yl)sulfonylphenyl]-1-methyl-3-propyl-4H-pyrazolo[4,3-d]pyrimidin-7-one;2-hydroxypropane-1,2,3-tricarboxylic acid
- Cas Number:
- 171599-83-0
- Molecular formula:
- C28H38N6O11S
- IUPAC Name:
- 5-[2-ethoxy-5-(4-methylpiperazin-1-yl)sulfonylphenyl]-1-methyl-3-propyl-4H-pyrazolo[4,3-d]pyrimidin-7-one;2-hydroxypropane-1,2,3-tricarboxylic acid
- Test material form:
- solid: particulate/powder
Constituent 1
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot No.of test material: Sponsor and R207
- Expiration date of the lot/batch: 2005-11-1
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Ambient
- Solubility and stability of the test substance in the solvent/vehicle: The 150 mg active ingredient / L stock solution was slightly cloudy after being sonicated for approximately 30 minutes and inverted at least 20 times to mix. Additionally, the 68 and 150 mg a.i./L test solutions which appeared slightly cloudy white with increasing intensity with increasing concentration. At test termination the 30, 68 and 150 mg a.i./L treatment levels had test material sticking to test chamber at water surface level, however, the remaining test solutions appeared clear and colorless.
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: A primary stock solution was prepared by dissolving sildenafil citrate in freshwater algal medium at a nominal concentration of 150 mg active ingredient / L. The stock was sonicated approximately 30 minutes and inverted at least 20 times to mix and appeared slightly cloudy.
- Final dilution of a dissolved solid, stock liquid or gel: Aliquots of the primary stock were proportionally diluted with algal medium to prepare the
five additional test solutions at nominal concentrations of 2.8, 6.2, 14, 30 and 68 mg active ingredient / L.
FORM AS APPLIED IN THE TEST (if different from that of starting material)
Nominal test concentrations were 2.8, 6.2, 14, 68, and 150 mg active ingredient / L.
Sampling and analysis
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: Nominal test concentrations were 2.8, 6.2, 14, 68, and 150 mg active ingredient / L. Additionally, there was a negative control with 0 mg active ingredient / L concentration.
- Sampling method: Samples of the test solutions were collected at approximately 0 and 72 hours to measure concentrations of the test substance. At test initiation samples were collected from batch solutions of each treatment and control group prior to distribution into test chambers. At test termination, the replicates from each respective treatment and control group were pooled and then sampled. All samples were collected in glass vials.
- Sample storage conditions before analysis: All samples were analyzed immediately without storage.
Test solutions
- Vehicle:
- yes
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: Direct weight addition
- Controls: A negative control was used
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): water mixed with freshwater algal medium and then sterilized.
- Concentration of vehicle in test medium (stock solution and final test solution(s) or suspension(s) including control(s)): Only solvent in solution
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): The 150 mg active ingredient / L stock solution was slightly cloudy after being sonicated for approximately 30 minutes and inverted at least 20 times to mix. Additionally, the 68 and 150 mg a.i./L test solutions which appeared slightly cloudy white with increasing intensity with increasing concentration. At test termination the 30, 68 and 150 mg a.i./L treatment levels had test material sticking to test chamber at water surface level, however, the remaining test solutions appeared clear and colorless.
Test organisms
- Test organisms (species):
- Scenedesmus capricornutum
- Details on test organisms:
- TEST ORGANISM
- Common name: Freshwater green algae
- Strain: scenedesmus capricornutum
- Source (laboratory, culture collection): Original algal cultures were obtained from the University of Toronto Culture Collection, and had been maintained in culture medium at Wildlife International, Ltd., Easton, Maryland
- Age of inoculum (at test initiation): >2 weeks
- Method of cultivation: Growing in culture medium
ACCLIMATION
- Acclimation period: 3 days
- Culturing media and conditions (same as test or not): Same as test
- Any deformed or abnormal cells observed: None
Study design
- Test type:
- static
- Water media type:
- other: Freshwater mixed with a specific mineral mixture known as algal medium
- Limit test:
- no
- Total exposure duration:
- 3 d
- Post exposure observation period:
- None
Test conditions
- Test temperature:
- 24.1 to 24.7°C, which is within the 23 ± 2°C range established for the test.
- pH:
- The pH of the test solutions at test initiation ranged from 6.0 to 8.1 and at exposure termination ranged from 7.8 to 9.2. This change in pH is typical for this strain of algae.
- Nominal and measured concentrations:
- Nominal concentrations selected for use in this study were 2.8, 6.2, 14, 30, 68 and 150 mg active ingredient /L
Measured concentrations of samples collected on Day 0 ranged from 90 to 106% of nominal concentrations. Measured concentrations of samples collected on Day 3 ranged from 12 to 56% of nominal concentrations. Mean measured test concentrations were 2.0, 4.6, 11, 21, 40 and 78 mg active ingredient /L representing 71, 74, 79, 70, 59 and 52% of nominal, respectively. - Details on test conditions:
- TEST SYSTEM
- Test vessel: Sterile 250-mL Erlenmeyer flasks plugged with foam stoppers
- Type (delete if not applicable): closed
- Material, size, headspace, fill volume: 100 mL of test or control medium
- Initial cells density: 10,000 cells/mL
- Control end cells density:
- No. of organisms per vessel:
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 6
- Stirring: 100 rpm continuous for the duration of the test
GROWTH MEDIUM
- Standard medium used: no
- Detailed composition if non-standard medium was used:
Compound Nominal Concentration
NH4Cl 15 mg/L
MgCl2•6H2O 12 mg/L
CaCl2•2H2O 18 mg/L
MgSO4•7H2O 15 mg/L
KH2PO4 1.6 mg/L
FeCl3•6H2O 0.08 mg/L
Na2EDTA•2H2O 0.1 mg/L
H3BO3 0.185 mg/L
MnCl2•4H2O 0.415 mg/L
ZnCl2 3 µg/L
CoCl2•6H2O 1.5 µg/L
CuCl2•2H2O 0.01 µg/L
Na2MoO4•2H2O 7 µg/L
NaHCO3 50 mg/L
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Wildlife International, Ltd. Well Water
- Total organic carbon:
- Particulate matter:
- Metals:
- Pesticides:
- Chlorine: 6.9 mg/L
- Alkalinity:
- Ca/mg ratio: 31.1 mg/LL
- Conductivity:
- Culture medium different from test medium: No
- Intervals of water quality measurement: Analysis was last performed on 2004-12-22, and the alkalinity was determined in the preceding 4 week period
OTHER TEST CONDITIONS
- Sterile test conditions: The solution was not sterile, but the flasks were sterilized prior to use.
- Adjustment of pH: Yes, using 10% HCl to pH = 8.0 +-0.1
- Light intensity and quality: The light intensity ranged from 6930 to 8590 lux, which was within the desired range of 8000 lux ± 20%.
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- The cell density, temperature, pH and light intensity were measured once a day for 72 hours
- Determination of cell concentrations: was done using a hemacytometer and a microscope. The samples then were diluted using an electron solution (Isoton), as needed, to maintain counting accuracy. A small amount of each sample was loaded onto a hemacytometer and 10 grids were counted. The mean number of cells per grid was calculated and this value was used to calculate the cell density of the sample. Using this technique, the minimum quantifiable cell density was 1,000 cells/mL.
TEST CONCENTRATIONS
- Test concentrations: Nominal concentrations selected for use in this study were 2.8, 6.2, 14, 30, 68 and 150 mg active ingredient/L - Reference substance (positive control):
- no
Results and discussion
Effect concentrationsopen allclose all
- Key result
- Duration:
- 24 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 4 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- cell number
- Key result
- Duration:
- 48 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 20 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- cell number
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 20 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- cell number
- Key result
- Duration:
- 24 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 4.4 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 48 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 43 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 78 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 24 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 1 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- other: Area Under the Growth Curve
- Key result
- Duration:
- 48 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 21 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- other: Area Under the Growth Curve
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- ca. 20 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- other: Area Under the Growth Curve
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- ca. 11 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- act. ingr.
- Basis for effect:
- other: Growth rate, area under growth curve, and the cell density
- Details on results:
- After 72 hours of exposure, inhibition of cell density in the 2.0, 4.6, 11, 21, 40 and 78 mg a.i./L groups was -6.4, 11, 12, 52, 66 and 89%, respectively, relative to the negative control. Inhibition of area under the growth curve in the 2.0, 4.6, 11, 21, 40 and 78 mg active ingredient / L groups was -7.3, 9.2, 13, 53, 67 and 90%, respectively, relative to the negative control. Inhibition of growth rate in the 2.0, 4.6, 11, 21, 40 and 78 mg active ingredient / L treatment groups was -0.93, 1.9, 2.2, 13, 20 and 39%, respectively, relative to the negative control. Treatment related effects were apparent in the three highest test concentrations. Dunnett’s test indicated that there were statistically significant differences (p < 0.05) in cell density, area under the growth curve and growth rate between the negative control and the 21, 40 and 78 mg active ingredient / L treatment groups. Consequently, the 72-hour NOEC for cell density, area under the growth curve and growth rate was 11 mg active ingredient / L.
After 72 hours of exposure, there were no signs of adherence of cells to the test chambers or aggregation/flocculation of algae in the controls or in any treatment group. There were no noticeable changes in cell morphology at concentrations ≤40 mg active ingredient / L when compared to the control. However, enlarged cells were noted in the 78 mg active ingredient / L treatment groups at 72 hours.
The test was considered to be valid since the mean cell density in the control replicates increased by a factor greater than 16 within 3 days. - Results with reference substance (positive control):
- No reference substance was used.
- Reported statistics and error estimates:
- The calculation of cell densities, areas under the growth curve, growth rates and percent inhibition values, as well as all statistical analyses, were conducted using “The SAS System for Windows”, Version 8.2 (4) or TOXSTAT version 3.5 (5).
EC50 values in this study represent the theoretical test concentration that would produce a 50% reduction in an effect relative to the control. Non-linear regression or linear interpolation was used to calculate EC50 values and their corresponding 95% confidence intervals for cell density (EC50), area under the growth curve (EbC50) and growth rate (ErC50) for each 24-hour exposure period, when possible (6,7). The 72-hour data were evaluated for normality and homogeneity of
variance (p=0.05) using the Shapiro-Wilk’s and Levene’s tests, respectively. The treatment groups then were compared to the negative control using Dunnett’s test (p=0.05). If the assumptions of normality and homogeneity of variances were not met an attempt was made to correct the condition by log transformation of the data. If the data failed the assumptions of normality and/or homogeneity of variances and transformations would not correct the problem, Dunnett’s test was still used to make the comparisons. The results of the statistical analyses, as well as an evaluation of the concentrationresponse pattern, were used to determine the NOEC relative to each parameter at 72 hours.
Category: Duration: 95% Confidence Interval (mg active ingredient/L)
Cell Density EC50
24 hr 2.0 to 58
48 hr 14 to 53
72 hr 18 to 26
Area Under the Growth Curve EC50
24 hr 0.041 to 27
48 hr 13 to 32
72 hr 18 to 25
Growth Rate EC50
24 hr 0.63 to 31
48 hr 31 to 60
72 hr Could not be calculated with the data obtained.
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Conclusions:
- This study calculates the EC50 for the test substance using various methods according to the criteria specified.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.