Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

Pay attention to self-protection.

Remove victims from hazardous area. Immediately remove soiled or soaked clothing and remove it to a safe distance. Keep victim warm, in a stabilized position and covered.

Do not leave victims unattended.

If the casualty is unconscious: Place the victim in the recovery position.

Inhalation

Potential for exposure by inhalation if aerosols or mists are generated.

Move victims into fresh air.

With labored breathing: Provide with oxygen. Consult a doctor.

If the casualty is not breathing: Perform mouth-to-mouth resuscitation, notify emergency physician immediately.

Skin contact

Wash off affected area immediately with plenty of water for at least 15 minutes.

If symptoms persist, consult a physician for treatment.

Eye contact

With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.

Consult an ophthalmologist immediately if the symptoms persist.

When dealing with caustic substances, notify emergency physician immediately (key words: burns in eye).

Ingestion

Rinse mouth.

Immediately give large quantities of water to drink.

Obtain medical attention.

When dealing with caustic substances, notify emergency physician immediately.

Most important symptoms and effects, both acute and delayed

Hazards

Strongly irritating to corrosive.Harmful in contact with skin and if swallowed.

Vapours may cause drowsiness and dizziness.

Indication of any immediate medical attention and special treatment needed

The initial focus is only on the local action, characterized by quickly progressing deep tissue damage.

In the eye, caustic/ irritating and harmful liquids cause, depending on the intensity of exposure, various levels of irritation, destruction, and ablation of the epithelium of the conjunctiva and cornea, corneal clouding, edema and ulcerations.

Danger! Possible loss of eyesight!

Superficial irritations and damage up to ulcerations and scarring develop on the skin.

After accidental absorption in the body, the pathology and clinical findings are dependent on the kinetics of the substance (quantity of absorbed substance, the absorption time, and the effectiveness of early elimination measures (first aid)/ excretion - metabolism).

A specific action of the substance is unknown.

In case of substances with high water solubility, irritations up to formation of necrosis in the upper respiratory tract may result after inhalation of caustic/ irritating aerosols and mists.

The initial focus is on the local action: signs of irritation of the respiratory tract such as coughing, burning behind the sternum, tears, burning in the eyes or nose.

There is a risk of pulmonary edema!

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:       Water spray, foam, CO2, dry powder.

Unsuitable extinguishing media:       high volume water jet

Special hazards arising from the substance or mixture

In case of fire cool endangered containers with water.

Hazard-determining flue gases might develop in case of fire:

Carbon oxides

Advice for firefighters

Water for fire fighting must not be introduced in the sewer system, subsoil, or surface waters. Assure that there are sufficient fire water retaining facilities Contaminated fire fighting water must be disposed of in conformity with the regulations of the local authorities.

Fire residues should be disposed of in accordance with the regulations.

In case of fire: wear a self contained respiratory apparatus

Wear suitable protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear personal protective equipment; see section 8.

Avoid breathing vapors/dust/mist.

Environmental precautions

Prevent product from entering drains.

Do not allow to reach the sewage system, the ground or natural water bodies.

Methods and material for containment and cleaning up

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Handling and storage

Precautions for safe handling

Observe the rules usually applicable when handling chemicals.

Wear personal protective equipment.

Conditions for safe storage, including any incompatibilities

Storage

Keep container tightly closed in a dry and well-ventilated place.

Keep away from sources of ignition - No smoking.

Specific end use(s)

We are unaware of any specific end uses which go beyond the data reported in Section 1.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 2922
Shippingopen allclose all
Labels:
8 (6.1)
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN 2922
Shippingopen allclose all
Labels:
8, 6.1
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 2922
Shipping information
Proper shipping name and description:
CORROSIVE LIQUID, TOXIC, N.O.S. (2-allylphenol)
Chemical name:
2-allylphenol
Labels:
8, 6.1
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 2922
Shipping information
Proper shipping name and description:
Corrosive liquid, toxic, n.o.s. (2-allylphenol)
Chemical name:
2-allylphenol
Labels:
8, 6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

DNEL/DMEL values

Remarks:

No substance-related safety assessment is necessary / has been conducted for this product.

PNEC values

Remarks:

No substance-related safety assessment is necessary / has been conducted for this product.

Exposure controls

Personal protective equipment

Respiratory protection

Use suitable respiratory protection where aerosols/vapours are generated.

Respirator with ABEK-P3 combination filter

use self-contained breathing apparatus if necessary

Note time limit for wearing respiratory protective equipment.

Hand protection

Applies to handling for brief periods or of small amounts

Glove material       Nitrile, for example:, Dermatril P 743, Kächele-Cama Latex GmbH (KCL), Germany, The rupture time and material thickness data are guideline values! Exact rupture time / material thickness data can be obtained from the protective glove manufacturer.

Material thickness       0,11 mm

Method              DIN EN 374

Applies to handling for longer periods or of large amounts

Glove material       Nitrile/Chloroprene, for example:, Nitopren 717, Kächele-Cama Latex GmbH (KCL), Germany

Eye protection

close-fitting protective goggles (e.g. closed goggles)

Provide for installation of emergency shower and eye bath.

Skin and body protection

Take care of your own personal safety.

suitable protective clothing - Use disposable clothing if appropriate.

Hygiene measures

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

In case of skin contact

Wash off with plenty of water and soap.

Do not eat, drink, smoke, or sniff while at work. Wash your hands and/or face before breaks and before termination of work.

Take off clothing and shoes contaminated with product. Clean before reuse.

Protective measures

The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).

Stability and reactivity

Reactivity

No further information available

Chemical stability

No further information available

Possibility of hazardous reactions

Possibility of hazardous reactions       No further information available

Conditions to avoid

Keep away from heat and sources of ignition.10.5.       Incompatible materials

Oxidizing agents

Hazardous decomposition products

No further information available

Disposal considerations

Waste treatment methods

Product

No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer.

The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.

Uncleaned packaging

With respect to local regulations, e.g.

dispose of to suitable waste incineration plant.