Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 601-141-6 | CAS number: 111937-03-2
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
If adverse health effects develop seek medical attention.
If inhaled:
not relevant.
On skin contact:
After contact with skin, wash immediately with plenty of water.
On contact with eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.
On ingestion:
Rinse mouth and then drink 200-300 ml of water.
Most important symptoms and effects, both acute and delayed
Symptoms: No significant symptoms are expected due to the non-classification of the product.
Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
water spray, carbon dioxide, dry powder, foam
Special hazards arising from the substance or mixture
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up
For small amounts: Pick up with suitable absorbent material.
For large amounts: Dike spillage. Pump off product.
Dispose of absorbed material in accordance with regulations.
Handling and storage
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.
Protection against fire and explosion:
Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.
Conditions for safe storage, including any incompatibilities
Suitable materials for containers: glass, phenol-epoxi resin Müller 79/14/3 (CH), High density polyethylene (HDPE), carbon steel (iron)
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
Below temperature limit the product properties will change. The property change is reversible by stirring and heating. Protect against moisture. Please refer to the product specific data sheet for further information.
Storage stability:
Storage temperature: <= 30 °C
Protect from temperatures below: 15 °C
Characteristics of the product are reversibly changed when falling below the limit temperature.
Protect from temperatures above: 30 °C
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Components with occupational exposure limits
No occupational exposure limits known.
PNEC
No PNEC value available.
DNEL
No DNEL value available.
Exposure controls
Personal protective equipment
Respiratory protection:
Not needed.
Hand protection:
Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately.
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
nitrile rubber (NBR) - 0.2 mm coating thickness
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work.
Stability and reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions when stored and handled according to instructions.
Conditions to avoid
See MSDS section 7 - Handling and storage.
Incompatible materials
Substances to avoid:
No substances known that should be avoided.
Hazardous decomposition products
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Disposal considerations
Waste treatment methods
Must be disposed of or incinerated in accordance with local regulations.
Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
