Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 292-602-7 | CAS number: 90640-80-5 A complex combination of polycyclic aromatic hydrocarbons obtained from coal tar having an approximate distillation range of 300°C to 400°C (572°F to 752°F). Composed primarily of phenanthrene, anthracene and carbazole
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption, other
- Remarks:
- adsorption /desorption of single PAH
- Type of information:
- calculation (if not (Q)SAR)
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Studies based on accepted scientific methods, peer-reviewed data
- Principles of method if other than guideline:
- Determination of (log) Koc values from (log) Pow data of single polycyclic aromatic hydrocarbons using (Q)SAR calculations; no (log) Koc for anthracene oil as such is derivable due to the complex composition (UVCB).
- GLP compliance:
- no
- Type of method:
- other: (Q)SAR calculation
- Remarks:
- experimentally determined log Pow values for individual PAH were converted to log Koc values by the relation (equation) of Karickhoff (1979)
- Media:
- soil
- Specific details on test material used for the study:
- The following polycyclic aromatioc hydrocarbons are taken into account in the determination of the range of (log) Koc values. These are representative for the UVCB substance anthracene oil.
- Acenaphthene
- Fluorene
- Phenanthrene
- Anthracene
- Fluoranthene
- Pyrene - Test temperature:
- not applicable
- Details on study design: HPLC method:
- not applicable
- Details on sampling:
- not applicable
- Details on matrix:
- not applicable
- Details on test conditions:
- not applicable
- Computational methods:
- not applicable
- Key result
- Type:
- Koc
- Value:
- ca. 5 000 - ca. 100 000 dimensionless
- Remarks on result:
- other: range for 6 PAH from acenaphthene to pyrene; calculated values: log Koc ranging from 3.71 to 5.01
- Key result
- Type:
- Koc
- Value:
- ca. 5 130 dimensionless
- Remarks on result:
- other: substance acenaphthene; calculated value: log Koc = 3.71
- Key result
- Type:
- Koc
- Value:
- ca. 9 330 dimensionless
- Remarks on result:
- other: substance fluorene; calculated value: log Koc = 3.97
- Key result
- Type:
- Koc
- Value:
- ca. 22 900 dimensionless
- Remarks on result:
- other: substance phenanthrene; calculated value: log Koc = 4.36
- Key result
- Type:
- Koc
- Value:
- ca. 21 380 dimensionless
- Remarks on result:
- other: substance anthracene; calculated value: log Koc = 4.33
- Key result
- Type:
- Koc
- Value:
- ca. 102 330 dimensionless
- Remarks on result:
- other: substance fluoranthene; calculated value: log Koc = 5.01
- Key result
- Type:
- Koc
- Value:
- ca. 93 330 dimensionless
- Remarks on result:
- other: substance pyrene; calculated value: log Koc = 4.97
- Details on results (HPLC method):
- not applicable
- Adsorption and desorption constants:
- not applicable
- Recovery of test material:
- not applicable
- Concentration of test substance at end of adsorption equilibration period:
- not applicable
- Concentration of test substance at end of desorption equilibration period:
- not applicable
- Transformation products:
- not measured
- Details on results (Batch equilibrium method):
- not applicable
- Statistics:
- --
- Endpoint:
- adsorption / desorption: screening
- Remarks:
- adsorption / desorption of single PAH
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- weight of evidence
- Justification for type of information:
- REPORTING FORMAT FOR THE ANALOGUE APPROACH
1. HYPOTHESIS FOR THE ANALOGUE APPROACH
The source test materials are individual polycyclic aromatic hydrocarbons. For read-across to the target substance anthracene oil, PAH composed of three to four fused rings are selected. Depending on size/molecular weight and structure, physico-chemical and environmental properties will be different. The target substance anthracene oil (benzo[a]pyrene < 50 ppm, AOL) is composed of a broad range of PAH consisting of two to four aromatic rings similar to the source materials.
The potential of anthracene oil for absorption / desorption to/from organic matter will be characterised by the range of PAH that constitute its composition. The source substances selected are main constituents of anthracene oil. Therefore, results obtained for Koc values of these compounds can be used in order to characterise the absorption / desorption potential of anthracene oil itself.
2. SOURCE AND TARGET CHEMICAL(S) (INCLUDING INFORMATION ON PURITY AND IMPURITIES)
Source test materials are individual PAH. Results are obtained by (Q)SAR calculations based on reliable measured log Kow values of selected PAH using methods also applied by competent national authorities of EU states in the process of review and evaluation of submitted data. Results are reported for individual substances and considered valid for the effects specified.
The target material anthracene oil is a UVCB substance produced by the distillation of coal tars extracting the approximate distillation range from ca. 300 °C to 400 °C. This distillation range excludes mostly low molecular aromatic hydrocarbons (especially one-ring and to a lower extent two-ring aromatics) as well as polycyclic aromatic hydrocarbons composed of more than four to five rings depending on the respective boiling points of the individual aromatic substances. Major constituents are three-ring (ca. 45 %) and four-ring (ca. 10 %) aromatics from acenaphthene to pyrene. Phenanthrene is the major constituent amounting to about 25 - 31 % (typical concentration).
3. ANALOGUE APPROACH JUSTIFICATION
Properties of the target substance anthracene oil relevant for environmental distribution will be determined by the properties of the PAH that are constituents of anthracene oil. Under environmental conditions or during processing of the target substance, environmentally available or volatile/water soluble components of anthracene oil can be released. These will be PAH (see above). Distribution properties (absorption/desorption) of these PAH will be specific for the environmental behaviour of anthracene oil. Therefore, it is justified to use date determined for individual PAH that are constituents of anthracene oil to characterise the environmental properties (Koc values) of anthracene oil itself. - Reason / purpose for cross-reference:
- read-across source
- Principles of method if other than guideline:
- Read-across to preceding entry:
Source test material: polycyclic aromatic hydrocarbons (PAH), generic mixture;
Reference: EU 2008 (Rapporteur: The Netherlands), KEMI 2010 (Kemikalieinspektionen, Swedish Chemicals Agency) - Key result
- Type:
- Koc
- Value:
- ca. 5 000 - ca. 100 000 dimensionless
- Remarks on result:
- other: range for 6 PAH from acenaphthene to pyrene; calculated values: log Koc ranging from 3.71 to 5.01
- Remarks:
- the test results of the source substance are adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 5 130 dimensionless
- Remarks on result:
- other: substance acenaphthene; calculated value: log Koc = 3.71
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 9 330 dimensionless
- Remarks on result:
- other: substance fluorene; calculated value: log Koc = 3.97
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 22 900 dimensionless
- Remarks on result:
- other: substance phenanthrene; calculated value: log Koc = 4.36
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 21 380 dimensionless
- Remarks on result:
- other: substance anthracene; calculated value: log Koc = 4.33
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 102 330 dimensionless
- Remarks on result:
- other: substance fluoranthene; calculated value: log Koc = 5.01
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Key result
- Type:
- Koc
- Value:
- ca. 93 330 dimensionless
- Remarks on result:
- other: substance pyrene; calculated value: log Koc = 4.97
- Remarks:
- the test result of the source substance is adopted as weight of evidence for the target substance anthracene oil
- Endpoint:
- adsorption / desorption, other
- Remarks:
- Measurements of PAH distribution between particulate matter and gas phase in the atmosphere
- Type of information:
- experimental study
- Remarks:
- Compilation of different experimental studies
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- data from handbook or collection of data
- Remarks:
- peer-reviewed data, acceptable for assessment
- Principles of method if other than guideline:
- Determination of PAH in the gas and particle phase of ambient air
- GLP compliance:
- no
- Type of method:
- other: atmospheric monitoring
- Media:
- other: particle and gas phase
- Specific details on test material used for the study:
- Distribution between the gas and partical phase in the atmosphere was determind and is reported for the 16 EPA PAH. The following PAH are representative for the UVCB substance anthracene oil.
- Acenaphthene
- Fluorene
- Anthracene
- Phenanthrene
- Fluoranthene
- Pyrene - Radiolabelling:
- no
- Test temperature:
- ambient temperature
- Details on study design: HPLC method:
- not applicable
- Analytical monitoring:
- yes
- Details on sampling:
- air sampling (ambient atmosphere at different locations)
- Details on matrix:
- gas phase and air particles were collected at different locations
- Details on test conditions:
- no applicable
- Computational methods:
- not applicable
- Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: classification of PAH regarding partitioning between particulates and gas phase in the atmosphere
- Remarks on result:
- other: as a first approximation, PAH with a liquid-phase vapour pressure (PL) of <10E-5 Pa at ambient temperature are present in the particle phase, and those with values of PL >10E-2 Pa are in the gas phase
- Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: general classification of PAH
- Remarks on result:
- other: naphthalene to phenanthrene are “gas-phase” aromatics (2- and 3-ring aromatics), while the PAH from benzofluoranthenes (5 rings) to the high-molecular mass PAH are “particle-phase” aromatics. The medium range of the 4-ring PAH show intermediate behaviour
- Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: classification of anthracene oil constituents (PAH)
- Remarks on result:
- other: three-ring PAH (acenaphthene to phenanthrene) will predominantly be present in the gas phase of the atmosphere, while four ring PAH (fluoranthene, pyrene) will be distributed between gas and particulate phase
- Details on results (HPLC method):
- not applicable
- Adsorption and desorption constants:
- no constants given (see below)
- Recovery of test material:
- not applicable
- Concentration of test substance at end of adsorption equilibration period:
- not applicable
- Concentration of test substance at end of desorption equilibration period:
- not applicable
- Transformation products:
- not measured
- Details on results (Batch equilibrium method):
- not applicable
- Statistics:
- not applicable
- Arey J, Zielinska B, Atkinson R, Winer AM (1987) Polycyclic aromatic hydrocarbon and nitroarene concentrations in ambient air during a winter-time high NOX episode in the Los Angeles basin. Atmosph Environ 21: 1437-1444.
- Bidleman, TF (1988) Atmospheric processes. Environ Sci Technol 22: 361-367.
- EC (2001b) Ambient Air Pollution by Polycyclic Aromatic Hydrocarbons (PAH). Position Paper. Prepared by the Working Group on Polycyclic Aromatic Hydrocarbons. July, 2001.
- Horstmann M, McLachlan MS (1998) Atmospheric deposition of semivolatile organic compounds to two forest canopies. Atmos Environ 32: 1799-1809.
- Neiderfellner J, Lenoir D, Matuschek G, Rehfeldt F, Utschick H, Bruggeman R (1997) Description of vapour pressures of polycyclic aromatic hydrocarbons by graph theoretical indices. Quant Struct-Act Relat 16: 38-48.
- Oja V, Suuberg EM (1998) Vapor pressures and enthalpies of sublimation of polycyclic aromatic hydrocarbons and their derivatives. J Chem Eng Data 43: 486-492.
- Pankow JF (1987) Review and comparative analysis of the theories on portioning between the gas and aerosol particulate phases in the atmosphere. Atmos Environ 21: 2275-2283.
- Thrane KE, Mikalsen A (1981) High-volume sampling of airborne polycyclic aromatic hydrocarbons using glass fibre filters and polyurethane foam. Atmos Environ 15: 909-918.
- Wania F, Mackay D (1996) Tracking the distribution of persistent organic pollutants. Environ Sci Technol 30: 390-396.
- Validity criteria fulfilled:
- not applicable
- Endpoint:
- adsorption / desorption, other
- Remarks:
- Measurements of PAH distribution between particulate matter and gas phase in the atmosphere
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- weight of evidence
- Justification for type of information:
- REPORTING FORMAT FOR THE ANALOGUE APPROACH
1. HYPOTHESIS FOR THE ANALOGUE APPROACH
The source test materials are individual polycyclic aromatic hydrocarbons. For read-across to the target substance anthracene oil, PAH composed of three to four fused rings are selected. Depending on size/molecular weight and structure, physico-chemical and environmental properties will be different. The target substance anthracene oil (benzo[a]pyrene < 50 ppm, AOL) is composed of a broad range of PAH consisting of two to four aromatic rings similar to the source materials.
The potential of anthracene oil for absorption to air particulates will be characterised by the range of PAH that constitute its composition. The source substances selected are main constituents of anthracene oil. Therefore, results obtained for the distribution between air particulates and atmospheric air of these compounds can be used in order to characterise the distribution in air of anthracene oil itself.
2. SOURCE AND TARGET CHEMICAL(S) (INCLUDING INFORMATION ON PURITY AND IMPURITIES)
Source test materials are individual PAH. Results are obtained by analytical measurements of air samples and are reported for individual well defined substances. Results have been evaluated in an expert review. Substances with similar properties are allocated to groups and specific properties are related to the test materials.
The target material anthracene oil is a UVCB substance produced by the distillation of coal tars extracting the approximate distillation range from ca. 300 °C to 400 °C. This distillation range excludes mostly low molecular aromatic hydrocarbons (especially one-ring and to a lower extent two-ring aromatics) as well as polycyclic aromatic hydrocarbons composed of more than four to five rings depending on the respective boiling points of the individual aromatic substances. Major constituents are three-ring (ca. 45 %) and four-ring (ca. 10 %) aromatics from acenaphthene to pyrene. Phenanthrene is the major constituent amounting to about 25 - 31 % (typical concentration).
3. ANALOGUE APPROACH JUSTIFICATION
Properties of the target substance anthracene oil relevant for environmental distribution will be determined by the properties of the PAH that are constituents of anthracene oil. Under environmental conditions or during processing of the target substance, environmentally available or volatile components of anthracene oil can be released. These will be PAH (see above). Distribution properties (distribution in ambient atmosphere between particles and air) of these PAH will be specific for the environmental behaviour of anthracene oil. Therefore, it is justified to use date determined for individual PAH that are constituents of anthracene oil to characterise the environmental properties (distribution between atmospheric air and air particulates) of anthracene oil itself. - Reason / purpose for cross-reference:
- read-across source
- Principles of method if other than guideline:
- Read-across to preceding entry:
Source test material: polycyclic aromatic hydrocarbons (PAH), generic mixture;
Reference: EU 2008 (Rapporteur: The Netherlands) - Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: classification of PAH regarding partitioning between particulates and gas phase in the atmosphere
- Remarks on result:
- other: as a first approximation, PAH with a liquid-phase vapour pressure (PL) of <10E-5 Pa at ambient temperature are present in the particle phase, and those with values of PL >10E-2 Pa are in the gas phase
- Remarks:
- the test results of the source substance are adopted as weight of evidence for the target substance anthracene oil
- Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: general classification of PAH
- Remarks on result:
- other: naphthalene to phenanthrene are “gas-phase” aromatics (2- and 3-ring aromatics), while the PAH from benzofluoranthenes (5 rings) to the high-molecular mass PAH are “particle-phase” aromatics. The medium range of the 4-ring PAH show intermediate behaviour
- Remarks:
- the test results of the source substance are adopted as weight of evidence for the target substance anthracene oil
- Key result
- Phase system:
- other: particles in ambient atmosphere
- Type:
- other: classification of anthracene oil constituents (PAH)
- Remarks on result:
- other: 3-ring PAH (acenaphthene to phenanthrene) will predominantly be present in the gas phase of the atmosphere, while 4-ring PAH (fluoranthene, pyrene) will be distributed between gas and particulate phase
- Remarks:
- the test results of the source substance are adopted as weight of evidence for the target substance anthracene oil
Referenceopen allclose all
Several methods are available for deriving log Koc (Koc) values from log Pow (Kow) data using (Q)SAR calculations. Two methods have been selected from European Competent Authorities2) 3)in the process of risk assessment of complex substances (UVCB) in order to obtain log Koc values from log Kow data. In both cases, main components of the substances were polycyclic aromatic hydrocarbons similar to PAH present in anthracene oil. (Log) Koc values of relevant PAH will be used to characterise the absorption behaviour of anthracene oil to organic matter. Log Koc values derived with the equation of Karickhoff are higher by 0.25 log Koc units than the values calculated with the equation of Seth. The substance set used by Karickhoff for the derivation of his equation comprised mostly non-halogenated aromatic hydrocarbons. Therefore, this relation is used to calculate the log Koc values for the constituents of anthracene oil. Log Koc values of anthracene oil constituents are derived based on log Pow data determined by Miller et al. 1985 and the relation of Karickhoff (see table below, third and fourth column). Data of EU 2008 and KEMI 2010 can be used for comparison.
Overview of estimated log Koc values, derived from log Pow (Kow) values (main constituents of anthracene oil)
|
CAS-No. |
Log Kow (exp.)1)(25 °C) |
Log Koc
|
Log Pow |
Log Koce) |
Log Powf) |
Log Kocg) |
Acenaphthene |
83-32-9 |
3.92a) |
3.71/ 3.46 |
4.00c) |
3.79 |
4.02 |
3.56 |
Fluorene |
86-73-7 |
4.18a) |
3.97/ 3.72 |
4.22c) |
4.01 |
4.13 |
3.67 |
Phenanthrene |
85-01-8 |
4.57a) |
4.36/ 4.11 |
4.57b) |
4.36 |
4.50 |
4.05 |
Anthracene |
120-12-7 |
4.54a) |
4.33/ 4.08 |
4.68b) |
4.47 |
4.50 |
4.05 |
Fluoranthene |
206-44-0 |
5.22d) |
5.01/ 4.76 |
5.20b) |
4.99 |
5.06 |
4.60 |
Pyrene |
129-00-0 |
5.18a) |
4.97/ 4.72 |
4.98c) |
4.77 |
4.99 |
4.56 |
a) column elution method
b) slow stirring method (average value)
c) shake flask method
d) calculated
e) compare to EU RAR 2008: Koc values were estimated using the experimental equation derived by Karickhoff et al. (1979)4): Koc = 0.63 Kow (or log Koc = 1.00 log Kow – 0.21)
f) Log Pow values are means of the range of log Kow values reported by Mackay et al. 2006
g) compare to KEMI 2010: Koc values were estimated using the equation derived by Seth et al. 1999)5): Koc = 0.35 Kow;
The error limits on Koc, resulting from differences in the nature of organic matter and the experimental difficulties and constraints in Koc measurements, are a factor of 2.5 in both directions, i.e. the coefficient 0.35 may vary from 0.14 to 0.88.
References:
1) Miller MM, Wasik P, Huang G-L, Shiu W-Y, and Mackay D (1985): Relationships between octanol-water partition coefficient and aqueous solubility. Environ. Sci. Technol. 19, 522-529
2) EU (2008): Coal-Tar Pitch, high temperature - European Union Risk Assessment Report, The Netherlands (URL:https://echa.europa.eu/documents/10162/433ccfe1-f9a5-4420-9dae-bb316f898fe1)
3) KEMI (2010): Creosote (PT8) - Document II-A - Risk Assessment (Final). Kemikalieinspektionen, Swedish Chemicals Agency
4) Karickhoff SW, Brown DS, and Scott TA (1979): Sorption of hydrophobic pollutants on natural sediments. Water Res. 13, 241-248 Karickhoff SW (1981): Semi-empirical estimation of sorption of hydrophobic pollutants on natural sediments and soil. Chemosphere 10, 883-846
5) Seth R, Mackay D, and Muncke J (1999): Estimating the organic carbon partition coefficient and its variability for hydrophobic chemicals. Environ. Sci. Technol. 33, 2390-239
6) Mackay (2006)
Excerpt from
ANNEX XV TRANSITIONAL DOSSIER - CTPHT CAS 65996-93-2, SECTION B. INFORMATION ON HAZARD AND RISK, B.4.1.1 Atmospheric degradation (or fate in the atmosphere)
. . . In the atmosphere PAHs are partitioned between the gas and particle phases, with the gas-particle partitioning depending on a number of factors, including the liquid-phase (or sub-cooled liquid-phase) vapour pressure of the PAH at the ambient atmospheric temperature, the surface area of the particles per unit volume of air, and the nature of the particle (Wania & Mackay, 1996; Pankow, 1987; Bidleman, 1988). As a first approximation, chemical compounds with liquid-phase vapour pressure of PL< 10-5 Pa at the ambient atmospheric temperature are present in the particle phase, and those with values of PL> 10-2 Pa at the ambient atmospheric temperature are essentially totally in the gas phase (Arey & Atkinson, 2003). As shown in measurements performed in Norway (Oslo), Germany (Bayreuth) and California, USA (Torrance), the 2- to 4-ring PAHs with vapour pressures ≥ 10-4 Pa are largely gas-phase species, whereas PAHs with 4 rings or more, with vapour pressure < 10-4 Pa are particle-associated (see Table B.4.1).
TableB.4.1. Summary of gas-particle phase partitioning
(PAH in bold = selected components of anthracene oil < 50 ppm BaP)
PAH (number of rings) |
Vapour pressure (Pa)a) |
Observed % in particulate phase |
|||
Naphthalene (2) |
1.1·101 |
0b) |
0e) |
||
Acenaphthylene (3) |
1.3·10-1 |
||||
Acenaphthene (3) |
4.0·10-1 |
||||
Fluorene (3) |
1.1·10-1 |
0b) |
|||
Anthracene (3) |
8.7·10-4 |
3b) |
0.5e) |
||
Phenanthrene (3) |
2.0·10-2 |
3b) |
12.4c) |
1.9d) |
0.4e) |
Fluoranthene (4) |
6.0·10-3 |
54b) |
49.7c) |
19.1d) |
5.9e) |
Pyrene (4) |
4.4·10-4 |
57b) |
61.4c) |
29.6d) |
7.5e) |
Benz(a)anthracene (4) |
2.1·10-6 |
97b) |
89.4c) |
62.7d) |
|
Chrysene (4) |
1.4·10-6 |
99b) |
|||
Benzo(b)fluoranthene(5) |
1.0·10-6 |
100b) |
92.2c) |
92.3d) |
|
Benzo(a)pyrene (5) |
5.3·10-8 |
100b) |
100c) |
100d) |
98.3e) |
Perylene (5) |
1.8·10-8 |
100b) |
90.0e) |
||
Dibenzo[a,c]anthracene (5) |
5.7·10-9 |
100b) |
|||
Dibenzo(a,h)anthracene (5) |
4.9·10-9 |
100b) |
100c) |
100d) |
|
Benzo(ghi)perylene (6) |
1.0·10-8 |
100b) |
100c) |
100d) |
Summary as given in EC (2001b).a)Vapour pressures taken from Neiderfellner et al.(1997) and Oja & Suuberg (1998);
b)Measurements made in Oslo, January/February 1979 (Thrane & Mikalsen, 1981);
c)Annual mean measurements made in Bayreuth, Germany, May 1995-April 1996 (Horstmann & McLachlan, 1998);
d)Summer mean measurements made in Bayreuth, Germany, May-October 1995 (Horstmann & McLachlan, 1998);
e)Measurements made in Torrance, California, February 1986 (Arey et al., 1987).
References:
Description of key information
The range of Koc values for key components in anthracene oil is estimated to be between approx. 5000 and 100,000 (log Koc between approx. 3.71 and 5.01). Log Koc for anthracene oil is calculated as mean of the six major components (typical concentration above 3 %). This mean value (log Koc = 4.392) relates to a Koc of 24,660.
Key value for chemical safety assessment
- Koc at 20 °C:
- 24 660
Additional information
Adsorption Coefficient
Due to the complex composition of anthracene oil a single Koc value cannot be determined for the substance. Main components (all PAH) will have their individual Koc values. An overview is presented in the following text.
Koc values of PAH have been estimated by calculations based on Pow/log Pow values using different relations between log Pow/Pow and log Koc/Koc. Well established is the equation by Karickhoff et al. (1979) derived from experimental data: log Koc = log Pow - 0.21 (or Koc = 0.63 Kow). Log Koc/Koc data reported for anthracene oil constituents will originate from this equation. Koc data derived using this equation have also been used in the EU Risk Assessment Report for Coal-tar pitch, high temperature (EU 2008).
Overall properties of anthracene oil will best be represented by the range of log Koc/Koc values corresponding to the PAH present in anthracene oil (acenaphthene to pyrene, see Chapter 1.). The estimated adsorption coefficients for these constituents extend from approx. log Koc ca. 3.71 for acenaphthene to approx. 5.01 for fluoranthene (Koc range from ca. 5100 to 100,000).
Substances with typical concentration above 3 % in anthracene oil are acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene with phenanthrene being the major constituent amounting to about 25 - 30 % (typical concentration). Fluorene and fluoranthene are present at a concentration of approx. 7 % each, while acenaphthene and pyrene contribute ca. 4 and 3 % to the total of anthracene oil.
Taking into account the log Koc values of these six substances, a mean log Koc value for anthracene oil can be calculated. Log Koc values are used, because adsorption coefficients were estimated using the log values. The mean log Koc value is calculated to be 4.392 for the six main components of anthracene oil. This value is close to the log Koc values of phenanthrene (4.36) that is selected as marker substance for anthracene oil due to its environmental properties that represent well anthracene oil itself. The Koc is calculated to be 24,660. This value is considered to represent best the properties of anthracene oil by a single Koc value as required for risk assessment.
Adsorption to Soil
Depending on their log Koc, adsorption of individual anthracene oil components to soil organic matter will differ. Lower molecular mass PAH (three-ring aromatics) tend to distribute to water to some extent, but with higher amounts bound to solid matter (higher percentage in soil than in sediment). Higher molecular mass PAH like fluorene and pyrene (four-ring PAH) tend to accumulate even more in the solid phase, while at the same time percentage is shifted from soil more to sediment.
Adsorption to Air Particles
Based on vapour pressure, the more volatile constituents of anthracene oil (three-ring aromatic compounds) are expected in the gas phase of the atmosphere rather than bound to air particulates. The four-ring PAH will absorb to some extent to air particulates and will be distributed between air and airborne particles.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.