Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 230-939-3 | CAS number: 7378-99-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 30 Nov 2015 to 21 Jul 2017
- Reliability:
- 1 (reliable without restriction)
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Radiolabelling:
- no
- Details on sampling:
- As the content of N,N-dimethyloctylamine in AD 1 is not known exactly (purity is given to be > 95 % (w/w)), for calculations the purity was assumed to be 100 % (w/w). This has no influence on the analytical result, as the test item is also used for calibration and only a change in concentration has to be determined.
A spike solution containing 20.00 g/L of the test item was prepared in acetonitrile.
The test solutions were prepared by transferring 0.5 mL of the spike solution into a 100 mL volumetric flask. The flasks were brought to volume with the respective buffer solutions. The concentration of the test item in the test solutions was 100 mg/L and did not exceed 0.01 M or the half saturation concentration. Under argon atmosphere 3.0 mL of the test solutions were given into several glass vials. The vials were closed with Teflon sealed crimp caps.
The samples taken at t0 were stored deep frozen until the sampling date after 5 days. After the last sampling date the samples were brought to room temperature and 1.0 mL acetonitrile were added (dilution factor: 4/3). Finally the samples were brought to a pH value of about 12 by adding a suitable amount of a 10 M sodium hydroxide solution:
• pH 4: 31 µL of 10 M sodium hydroxide solution were added
• pH 7: 20 µL of 10 M sodium hydroxide solution were added
• pH 9: 12 µL of 10 M sodium hydroxide solution were added
The nominal content of the test item in the measuring solution was 75 mg/L. The analytical method was specific for determination of the test item at the test solution concentrations. The validation of the analytical method is presented in Appendix 3 of this report. - Buffers:
- Citrate buffer pH 4 (0.05 M):
Per 1000 mL ultra-pure grade water 10.514 g citric acid monohydrate had to be weighed and 59 mL of sodium hydroxide solution (1 M) had to be added to reach pH 4.
The pH value of the buffer solution was determined to be 4.00.
Phosphate buffer pH 7 (0.05 M):
Per 1000 mL ultra-pure grade water 6.818 g Potassium dihydrogenphosphate had to be weighed and 29 mL of sodium hydroxide solution (1 M) had to be added to reach pH 7.
The pH value of the buffer solution was determined to be 7.00.
Borate buffer pH 9 (0.05 M):
Per 1000 mL ultra-pure grade water 3.748 g potassium chloride and 3.102 g boric acid had to be weighed and 21 mL of sodium hydroxide solution (1 M) had to be added to reach pH 9.
The pH value of the buffer solution was determined to be 9.00.
The pH values of the buffer solutions used during the test were determined with a calibrated pH meter with a precision of 0.01 pH units. - Details on test conditions:
- The preliminary test was carried out using a thermostatically controlled water bath at 50 °C +- 0.5 °C. Photolytic interference was avoided. All suitable precautions were taken to exclude dissolved oxygen (degassing the buffers with argon for at least five minutes and purging the vessels with argon before preparing the test solution). Sterile buffer solutions were used.
- Duration:
- 0 h
- pH:
- 4
- Temp.:
- 50 °C
- Initial conc. measured:
- 101.1 mg/L
- Duration:
- 120 h
- pH:
- 4
- Temp.:
- 50 °C
- Initial conc. measured:
- 101.9 mg/L
- Duration:
- 0 h
- pH:
- 7
- Temp.:
- 50 °C
- Initial conc. measured:
- 99.5 mg/L
- Duration:
- 120 h
- pH:
- 7
- Temp.:
- 50 °C
- Initial conc. measured:
- 99.2 mg/L
- Duration:
- 0 h
- pH:
- 9
- Temp.:
- 50 °C
- Initial conc. measured:
- 85.9 mg/L
- Duration:
- 120 h
- pH:
- 9
- Temp.:
- 50 °C
- Initial conc. measured:
- 80.6 mg/L
- Number of replicates:
- Two replicates per pH and sampling time
- Positive controls:
- not specified
- Negative controls:
- not specified
- Preliminary study:
- The time courses of the test item concentration at 50 °C and three different pH values were determined. The determined temperatures during the entire period of the test were in the range of 50.0 °C ± 0.5 °C. Two samples were taken at each pH and each sampling date.
Samples were taken at the beginning of the test and after 120 hours at pH 4, pH 7 and pH 9. The concentrations in buffer solutions were determined by HPLC-UV analysis. At pH 4, pH 7 and pH 9 less than 10 % of the test item were hydrolysed within 120 hours at 50 °C. - Transformation products:
- not measured
- Details on hydrolysis and appearance of transformation product(s):
- At pH 4, pH 7 and pH 9 less than 10 % of the test item were hydrolysed within 120 hours at 50 °C.
- % Recovery:
- 100.8
- pH:
- 4
- Temp.:
- 50 °C
- Duration:
- 120 h
- % Recovery:
- 99.7
- pH:
- 7
- Temp.:
- 50 °C
- Duration:
- 120 h
- % Recovery:
- 93.8
- pH:
- 9
- Temp.:
- 50 °C
- Duration:
- 120 h
- Key result
- pH:
- 4
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Key result
- pH:
- 7
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Key result
- pH:
- 9
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Validity criteria fulfilled:
- yes
- Remarks:
- validated according to guideline SANCO/3029/99 rev. 4
- Conclusions:
- The abiotic degradation of AD 1 as a function of pH in aqueous solution was determined according to OECD guideline 111 and EC method C.7 (440/2008).
The hydrolysis of AD 1 is negligible at pH 4, pH 7 and pH 9. The degradation of AD 1 was less than 10 % at pH 4, pH 7 and pH 9 at 50 °C over a period of 120 hours. Therefore the corresponding half-life time can be estimated to be longer than one year at 25 °C. - Executive summary:
Report: Bär, C. (2017): Abiotic Degradation - Hydrolysis as Function of pH of AD 1
Source: Eurofins Agroscience Services EcoChem GmbH / Eurofins Agroscience Services Ecotox GmbH,Eutinger Straße 24,
D – 75223 Niefern-Öschelbronn, Germany; unpublished Report: S15 -05586Guidelines: OECD guideline 111 and EC method C.7 (440/2008)
Deviations:no
GLP:yes (incl. certificate)
Study period: 30 November 2015 to 21 July 2017
Results: The degradation of AD 1was less than 10 % at pH 4, pH 7 and pH 9 at 50 °C over a period of 120 hours. Therefore the corresponding half-life time can be estimated to be longer than one year at 25 °C.
Reference
Table1: Time course of AD 1 concentration at pH 4 at 50 °C
Time [h] |
Determined Content ofAD 1in Sample [mg/L](1 |
Mean Determined Content ofAD 1in Sample [mg/L](1) |
Actual concentration in % of initial concentration |
0 |
101.0 |
101.1 |
--- |
|
101.2 |
|
|
120 |
102.7 |
101.9 |
100.8 |
|
101.1 |
|
|
(1): regardinga dilution factor of 4/3
Table2: Time course of AD 1 concentration at pH 7 at 50 °C
Time [h] |
Determined Content ofAD 1in Sample [mg/L](1 |
Mean Determined Content ofAD 1in Sample [mg/L](1) |
Actual concentration in % of initial concentration |
0 |
98.9 |
99.5 |
--- |
|
100.0 |
|
|
120 |
98.6 |
99.2 |
99.7 |
|
99.7 |
|
|
(1): regardinga dilution factor of 4/3
Table3: Time course of AD 1 concentration at pH 9 at 50 °C
Time [h] |
Determined Content ofAD 1in Sample [mg/L](1 |
Mean Determined Content ofAD 1in Sample [mg/L](1) |
Actual concentration in % of initial concentration |
0 |
86.6 |
85.9 |
--- |
|
85.2 |
|
|
120 |
80.5 |
80.6 |
93.8 |
|
80.7 |
|
|
(1): regardinga dilution factor of 4/3
Description of key information
The hydrolysis of AD 1 is negligible at pH 4, pH 7 and pH 9. The degradation of AD 1 was less than 10 % at pH 4, pH 7 and pH 9 at 50 °C over a period of 120 hours. Therefore the corresponding half-life time can be estimated to be longer than one year at 25 °C.
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 1 yr
- at the temperature of:
- 25 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.