Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
(Q)SAR
Adequacy of study:
weight of evidence
Study period:
From 28 to 29 June 2017
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
Justification for type of information:
1. SOFTWARE
iSafeRat® HA-QSAR toolbox v1.1

2. MODEL (incl. version number)
iSafeRat® HA-QSAR v 1.3 to predict Vapour Pressure

3. SMILES OR OTHER IDENTIFIERS USED AS INPUT FOR THE MODEL
See attached QMRF

4. SCIENTIFIC VALIDITY OF THE (Q)SAR MODEL
See attached QMRF

5. APPLICABILITY DOMAIN
See attached QPRF

6. ADEQUACY OF THE RESULT
See attached QPRF
Qualifier:
equivalent or similar to guideline
Guideline:
OECD Guideline 104 (Vapour Pressure Curve)
Deviations:
yes
Remarks:
QSAR model
Principles of method if other than guideline:
A Quantitative Structure-Property Relationship (QSPR) model was used to calculate the vapour pressure of the consituents of the test item , a Natural Complex Substance. This QSPR model has been validated as a QSAR model to be compliant with the OECD recommendations for QSAR modeling (OECD, 2004) and predicts the endpoint value which would be expected when testing the substance under experimental conditions in a laboratory following the Guideline for Testing of Chemicals No. 104, "Vapour Pressure". The criterion predicted was the vapour pressure at 25°C in Pascals.

The determination was performed using a regression method in which validated boiling point values are plotted against the log of vapour pressure values, where the pressure is in Pascals. The comparison was made with other members of the same chemical group. The results are considered to be as accurate as those from a good quality OECD guideline 104 study.
GLP compliance:
no
Type of method:
other: QSAR
Key result
Test no.:
#1
Temp.:
25 °C
Vapour pressure:
51.6 Pa
Remarks on result:
other: Constituent 1
Key result
Test no.:
#2
Temp.:
25 °C
Vapour pressure:
63.7 Pa
Remarks on result:
other: Constituent 2
Key result
Test no.:
#3
Temp.:
25 °C
Vapour pressure:
463 Pa
Remarks on result:
other: Constituent 3
Key result
Test no.:
#4
Temp.:
25 °C
Vapour pressure:
372 Pa
Remarks on result:
other: Constituent 4

Results

The results below are the vapour pressure values for each constituent of the test item, a UVCB substance, anticipated during a study following the OECD Guideline No. 104:

The vapour pressure values are calculated as follows:

Constituents 

vapour pressure (Pa) at 25 °C

95% confidence limits (Pa)

Constituent 1

51.6

47.6 - 55.9

Constituent 2

63.7

60.5 - 67.2

Constituent 3

463

439 - 488

Constituent 4

372

352 - 392

Conclusions:
The vapour pressure values of constituents are between 51.6 and 463 Pa at 25°C.
Executive summary:

A calculation method prediction was performed to assess the vapour pressure of the test item. This calculation method predicts the endpoint value which would be expected when testing the substance under experimental conditions in a laboratory following Guideline for Testing of Chemicals No. 104. The criterion predicted was the vapour pressure in Pa at 25°C.

The vapour pressure determination of the individual constituents of the mixture was performed using a method based on a linear regression equations for a series of common structures (for example alkanes) have been generated using high quality vapour pressure data.In the majority of cases data for vapour pressure were obtained from the following methods described in the OECD Guideline No. 104: isoteniscope, dynamic, static, effusion (vapour pressure balance or loss of weight) and gas saturation methods. Likewise, data for boiling points were obtained from the following methods described in the OECD Guideline No. 103: DSC (Differential Scanning Calorimetry), DTA (Differential Thermal Analysis), dynamic method, capillary (Siwoloboff) method, ebulliometer, distillation and photocell detection.

The vapour pressure values of 4 majors components (covering more than 90% of the composition of the substance) are calculated as follows:

Constituent 1     51.6

Constituent 2     63.7

Constituent 3     463

Constituent 4     372

Description of key information

4 major components of the substance (more than 90% of the composition) ranging from 51.6 and 463 Pa at 25°C.

Key value for chemical safety assessment

Additional information

No study was conducted on the oil itself.

A calculation method prediction was performed to assess the vapour pressure of the test item. This calculation method predicts the endpoint value which would be expected when testing the substance under experimental conditions in a laboratory following Guideline for Testing of Chemicals No. 104. The criterion predicted was the vapour pressure in Pa at 25°C.

The vapour pressure determination of the individual constituents of the mixture was performed using a method based on a linear regression equations for a series of common structures (for example alkanes) have been generated using high quality vapour pressure data. In the majority of cases data for vapour pressure were obtained from the following methods described in the OECD Guideline No. 104: isoteniscope, dynamic, static, effusion (vapour pressure balance or loss of weight) and gas saturation methods. Likewise, data for boiling points were obtained from the following methods described in the OECD Guideline No. 103: DSC (Differential Scanning Calorimetry), DTA (Differential Thermal Analysis), dynamic method, capillary (Siwoloboff) method, ebulliometer, distillation and photocell detection.

The vapour pressure values are calculated as follows:

Constituent 1     51.6

Constituent 2     63.7

Constituent 3     463

Constituent 4     372