Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion:
Rinse mouth and then drink plenty of water.
Note to physician:
Treatment: Symptomatic treatment (decontamination, vital functions).

Fire-fighting measures

Suitable extinguishing media:
dry extinguishing media, carbon dioxide, foam
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions:
Ensure adequate ventilation.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
For small amounts: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).
For large amounts: Dike spillage. Vacuum up spilled product.
For residues: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).
Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling
Protection against fire and explosion:
The relevant fire protection measures should be noted.
Storage
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated place

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Components with workplace control parameters
none
Personal protective equipment
Respiratory protection:
Breathing protection if gases/vapours are formed. Particle filter with medium efficiency for solid and
liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN
374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of
dust).
General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Hazardous reactions:
No hazardous reactions if stored and handled as prescribed/indicated.
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
11. Toxicological Information
Acute toxicity

Disposal considerations

Observe national and local legal requirements.