Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 478-200-6 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2006-09-27 to 2009-06-19
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP study performed according to OECD Guideline 111 (Hydrolysis as a Function of pH) without deviations.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 007
- Report date:
- 2007
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Deviations:
- no
- Remarks:
- The testing facility indicated that the protocol was followed without deviation.
- GLP compliance:
- yes
Test material
Reference
- Name:
- Unnamed
- Type:
- Constituent
- Details on test material:
- - Name of test material (as cited in study report): VRT-126028
- Molecular formula (if other than submission substance): Not applicable
- Molecular weight (if other than submission substance): Not applicable
- Smiles notation (if other than submission substance): Not applicable
- InChl (if other than submission substance): Not applicable
- Structural formula attached as image file (if other than submission substance): Not applicable
- Substance type: No data
- Physical state: White powder
- Analytical purity: 99.3% area by GC
- Impurities (identity and concentrations): 0.10% H2O; 0.6% unknown impurities
- Composition of test material, percentage of components: No data
- Isomers composition: Not applicable
- Purity test date: 2006-05-22
- Lot/batch No.: 25414
- Expiration date of the lot/batch: 2008-05-01
- Stability under test conditions: No data
- Storage condition of test material: Room temperature
- Radiolabelling:
- no
Study design
- Analytical monitoring:
- yes
- Details on sampling:
- - Sampling intervals for the parent/transformation products: Preliminary test - approximately 5 minutes after start of incubation, then after 2.4 and 120 hours; EEC Test 1 - initial sample taken immediately time zero and samples to cover the range 20 - 70% hydrolysis; EEC Test 3 - initial sample time zero, further samples taken to ensure that two were when the degree of hydrolysis was greater than 30%.
- Sampling method: No data
- Sampling methods for the volatile compounds, if any: Not applicable
- Sampling intervals/times for pH measurements: Start and end of the study
- Sampling intervals/times for sterility check: No data
- Sample storage conditions before analysis: Samples were not stored before analysis
- Other observation, if any (e.g.: precipitation, color change etc.): No data - Buffers:
- - pH: 4.0, 7.0, 9.0
- Type and final molarity of buffer: Phosphate (pH 4.0 and 7.0) and borate (9.0) buffer; molarity not provided
- Composition of buffer: pH 4.0 - Potassium dihydrogen orthophosphate (6.0 g) and disodium hydrogen orthophosphate dodecahydrate (12.8 g) were dissolved in purified water (1900 mL), and the pH was adjusted to 4.0 +/- 0.05 with orthophosphoric acid. The volume was then adjusted to 2000 mL with purified water.
pH 7.0 - Potassium dihydrogen orthophosphate (27.2 g) was dissolved in purified water (3800 mL), 1 M sodium hydroxide (120 mL) was added and the pH was adjusted to 7.0 +/- 0.05 1M hydrochloric acid. The volume was then adjusted to 4000 mL with purified water.
pH 9.0 - Disodium tetraborate decahydrate (66.4 g) and potassium dihydrogen orthophosphate (7.2 g) were dissolved in purified water (3800 mL) and the pH was adjusted to 9.0 +/- 0.05 with 1M hydrochloric acid. The volume was then adjusted to 4000 mL with purified water. - Details on test conditions:
- TEST SYSTEM
- Type, material and volume of test flasks, other equipment used: 100 mL Wheaton vials
- Sterilisation method: No data
- Lighting: No
- Measures taken to avoid photolytic effects: Exclusion of light
- Measures to exclude oxygen: Vials with buffer soluation were purged with nitrogen.
- Details on test procedure for unstable compounds: Not applicable
- Details of traps for volatile, if any: Not applicable
- If no traps were used, is the test system closed/open: No data
- Is there any indication of the test material adsorbing to the walls of the test apparatus? No
TEST MEDIUM
- Volume used/treatment: 10 mL test solution in purified water (20 g/L), buffer solution of 90 mL.
- Kind and purity of water: Purified
- Preparation of test medium: 10 mL test solution was added to 90 mL buffer solution (pre-equilibrated at test temperature)
- Renewal of test solution: No
- Identity and concentration of co-solvent: No co-solvent used
OTHER TEST CONDITIONS
- Adjustment of pH: There was some decrease in the pH of test solution in the course of the preliminary test, and this being the case, stronger buffer solutions (containing twice the concentration of buffer salts) were employed in EEC Test 1 and 3. Additionally, it was necessary to slightly re-adjust test solutions back to nominal test pH, using 1 M sodium hydroxide, immediately on preparation.
- Dissolved oxygen: No data
- Number of replicates:
- 2
- Positive controls:
- no
- Negative controls:
- no
- Statistical methods:
- -Concentration of test substance in the analysed solution (Ca): Ca (mg/L) = sample peak area x standard concentration (mg/L)/mean peak area of bracketing standards.
- Concentration of test substances in each test solution: Cb(mg/L) = Ca(mg/L) x dilution factor, where dilution factor was 10 for all samples tested.
- Observed rate constant, Kobs: Kobs = -slope x 2.303
- Hydrolytical half-life, t1/2: t1/2 = 0.693/Kobs.
Results and discussion
- Preliminary study:
- The preliminary study showed that after 2.4 hours at each pH 4, 7, and 9 and 50 +/- 0.5 deg C, less than 50% hydrolysis had occurred. However, greater than 10% hydrolysis had occurred after 120 hours (5 days) under these conditions (1 year>t1/2 >1 day), which necessitated proceeding to the next stage of testing (EEC Test 1) at each pH.
- Test performance:
- The hydrolysis reaction for the test substance at pH 4, 7, and 9 was shown to follow pseudo-first order behavior in EEC Test 1.
EEC test 3 was conducted at 25 deg C and the hydrolysis rate constant (Kobs) and hydrolytical half-lives (t1/2) were determined to be the following: pH4: Kobs(hour-1) 0.0037, t1/2 (days) 7.8; pH 7: Kobs(hour-1) 0.0037, t1/2 (days) 7.8; pH 9 : Kobs(hour-1) 0.0057, t1/2 (days) 5.1. - Transformation products:
- not measured
- Details on hydrolysis and appearance of transformation product(s):
- - Formation and decline of each transformation product during test: No data
- Pathways for transformation: No data
- Other: No data
Any other information on results incl. tables
1. Test solutions were not confirmed to be sterilized. Although biotic degradation is not expected to be significant over the test period (see T003101.HLS.VEP0041/064309.CO2Evol.K1.QCE), the calculated half-lifes might overestimate the actual abiotic degradation rate.
2. The incubation vials (Wheaton) were not confirmed to be closed during the test period.
Applicant's summary and conclusion
- Validity criteria fulfilled:
- not specified
- Conclusions:
- The test substance was determined to have hydrolytic half-lives of approximately 8, 8 and 5 days at pH 4, 7 and 9, respectively.
- Executive summary:
Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.