Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 942-492-8 | CAS number: -
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 25/06/2015
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study without detailed documentation
- Qualifier:
- according to guideline
- Guideline:
- other: D5191
- Deviations:
- no
- GLP compliance:
- no
- Other quality assurance:
- other:
- Type of method:
- other: D5191
- Test no.:
- #1
- Temp.:
- 100 °F
- Vapour pressure:
- 1.83 PSI
- Conclusions:
- The Vapour Pressure of Thermal cracking oil from blends of rubber, fuel oils and paraffin waxes, steam distillation condensate is 1.83PSI at 100°F.
- Executive summary:
Thermal cracking oil from blends of rubber, fuel oils and paraffin waxes, steam distillation condensate was determined to have a Vapour pressure of 1.83PSI at 100°F using a standard test method for vapour pressure of petroleum products D5191.
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 23/09/2014 - 29/09/2014
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study without detailed documentation
- Qualifier:
- according to guideline
- Guideline:
- other: IP394
- Version / remarks:
- Part 1
- Deviations:
- no
- GLP compliance:
- no
- Type of method:
- other: IP 394: Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
- Key result
- Test no.:
- #1
- Temp.:
- 100 °F
- Vapour pressure:
- 9 kPa
- Conclusions:
- The Vapour Pressure (Dry equivalent) of Thermal cracking oil from blends of rubber, fuel oils and paraffin waxes, steam distillation condensate is 9kPa
- Executive summary:
Thermal cracking oil from blends of rubber, fuel oils and paraffin waxes, steam distillation condensate was determined to have a Vapour pressure (Dry Equivalent) of 9kPa using a standard test method for vapour pressure of petroleum products IP394 (Part 1).
Referenceopen allclose all
Description of key information
Thermal cracking oil from blends of rubber, fuel oils and paraffin waxes, steam distillation condensate was determined to have a Vapour pressure (Dry Equivalent) of 9kPa using a standard test method for vapour pressure of petroleum products IP394. In addition to this, a Vapour pressure of 1.83PSI at 100°F using a standard test method for vapour pressure of petroleum products D5191 is also reported.
Key value for chemical safety assessment
- Vapour pressure:
- 9 kPa
- at the temperature of:
- 37.8 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
