Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 908-712-1 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin sensitisation
Administrative data
- Endpoint:
- skin sensitisation: in chemico
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 24 July 2019 - 22 January 2020
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2020
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 442C (In Chemico Skin Sensitisation: Direct Peptide Reactivity Assay (DPRA))
- Version / remarks:
- adopted on 04 February 2015
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of study:
- direct peptide reactivity assay (DPRA)
Test material
- Reference substance name:
- Pentyl butyrate
- EC Number:
- 208-739-2
- EC Name:
- Pentyl butyrate
- Cas Number:
- 540-18-1
- Molecular formula:
- C9H18O2
- IUPAC Name:
- pentyl butyrate
- Reference substance name:
- 2-methylbutyl butyrate
- EC Number:
- 256-973-9
- EC Name:
- 2-methylbutyl butyrate
- Cas Number:
- 51115-64-1
- Molecular formula:
- C9H18O2
- IUPAC Name:
- 2-methylbutyl butyrate
- Test material form:
- liquid
Constituent 1
Constituent 2
- Specific details on test material used for the study:
- Name: AMYL BUTYRATE
Synonyms: Pentyl Butyrate (Sum of Isomers) Reaction mass of 2-methylbutyl butyrate and pentyl butyrate
CAS No.: 540-18-1
EC No.: 908-712-1
Description: Clear colorless to pale yellow liquid
Storage condition: At room temperature
Molecular weight: 158.24 g/mol
Specific test item requirements (handling conditions): None
In chemico test system
- Details on the study design:
- VEHICLE
Based on solubility results, the selected vehicle was acetonitrile.
POSITIVE CONTROL
Name: Cinnamaldehyde
CAS No.: 104-55-2
Purity: 99.5%
Batch No: MKCG8499
Supplier: Sigma Aldrich
Molecular weight: 132.16 g/mol
Specific handling conditions: none
As several test items were assayed concurrently, the results of the positive control were shared.
The positive control was pre-weighed and stored under appropriate conditions until ready to perform testing. It was dissolved in acetonitrile at 100 mM. The physical aspect of the formulation was colorless limpid solution and was used just after its preparation.
CONTROL SAMPLES
Co-elution control samples
In order to detect possible co-elution of the test item with a peptide, co-elution control samples were prepared by incubating the test item formulation with each buffer used to dilute the peptides. Cysteine or lysine peptides were not added to these samples.
Reference control samples
For each peptide, the analytical batch included reference control samples (sub-categorized in reference control A, B or C samples). All these control samples were prepared in triplicate and at the nominal concentration of 0.500 mM in the vehicle specified in the reference control samples preparation section. These samples were used to:
reference control A: check the accuracy of the calibration curve for peptide quantification,
reference control B: check the stability of the peptide during analysis,
reference control C: check that the vehicle did not impact the percentage of peptide depletion.
TEST ITEM FORMULATION
Test item formulation preparation
The test item was pre-weighed and stored under appropriate conditions until ready to perform testing. It was dissolved in the selected vehicle (acetonitrile) at 100 mM. This formulation had the aspect of a colorless limpid solution.
The formulation was used just after its preparation.
Additional samples to test the neat test item
Since the test item is a multi-constituent substance, the reactivity of neat test item was evaluated.
Neat test item was tested as such (without prior dilution) by incubating it at 1:10 and 1:50 ratios with the cysteine and lysine peptides, respectively.
TEST SYSTEMS
Cysteine peptide
Peptide sequence: Ac-RFAACAA-COOH
Peptide sequence synonyms: Ac RFAACAA-OH
Molecular weight: 750.88 g/mol
Supplier: JPT Peptide Technologies GmbH
Batch No.: 111016HS_MHe_W1218
Purity: 95.99%
Storage condition: At -20°C
Description: White powder
Specific handling conditions: none
Batch number and any information relating to the characterization and integrity of the test system are documented in a certificate of analysis, which is archived in Citoxlab France files.
The cysteine peptide solution was freshly prepared at 0.667 mM in an aqueous phosphate buffer (pH 7.5) solution. The detailed preparation method is described in a Citoxlab France analytical method, specific to the DPRA test.
Lysine peptide
Peptide sequence: Ac-RFAAKAA-COOH
Peptide sequence synonyms: Ac RFAAKAA-OH
Molecular weight: 775.91 g/mol
Supplier: JPT Peptide Technologies GmbH
Batch No.: 120514HS_DW_W1218
Purity: 94.66%
Storage condition: At -20°C
Description: White powder
Specific handling conditions: none
Batch number and any information relating to the characterization and integrity of the test system are documented in a certificate of analysis, which is archived in Citoxlab France files.
The lysine peptide solution was freshly prepared at 0.667 mM in an aqueous ammonium acetate buffer (pH 10.2) solution. The preparation method is described in a Citoxlab France analytical method, specific to the DPRA test.
EQUIPMENT, REAGENTS AND COMPUTER SYSTEMS (INDICATIVE LIST)
Equipment list
High Performance Liquid Chromatography (HPLC) systems with a UV detector (220 nm)
Analytical chromatographic columns (Zorbax SB C18, 100 x 2.1 mm; 3.5 µm HPLC analytical column)
Precision electronic scales
pH meter
Small laboratory equipment [micropipettes, vortex, etc.]
Centrifuge
Fridge
Freezer
REAGENTS
Only reagents with high purity were used throughout this study. Their purity grade and the identification of the Suppliers are described in the raw data.
The list of reagents used in this study is described in a Citoxlab France analytical method procedure, specific to the DPRA test.
DESIGN OF THE DIRECT PEPTIDE REACTIVITY ASSAY
The test item was tested in one run. The run was processed as described below.
PREPARATION OF THE SAMPLES
The following samples were prepared in triplicate except for the co-elution control samples for which only one sample was prepared per peptide buffer.
Co-elution control samples preparation
For the co-elution control with cysteine peptide:
50 µL of test item formulation was incubated with 750 µL of cysteine peptide dilution buffer (without cysteine peptide) and 200 µL of acetonitrile.
For the co-elution control with lysine peptide:
In parallel, 250 µL of test item formulation was incubated with 750 µL of lysine peptide dilution buffer (without lysine peptide).
Reference control samples preparation
Reference control A and B samples
In a vial, acetonitrile was added to a volume of peptide solution (cysteine or lysine) to achieve a nominal concentration of 0.500 mM.
Reference control C samples
Reference control C samples were prepared for each vehicle used to dissolve the test and positive control items.
For the reference control C prepared with cysteine peptide:
50 µL of vehicle (acetonitrile) was incubated with 750 µL of cysteine peptide solution (at 0.667 mM in phosphate buffer at pH 7.5) and 200 µL of acetonitrile.
For the reference control C prepared with lysine peptide:
In parallel, 250 µL of vehicle (acetonitrile) was incubated with 750 µL of lysine peptide solution (at 0.667 mM in ammonium acetate buffer at pH 10.2).
Cinnamaldehyde (positive control) depletion control samples preparation
For the reactivity of cinnamaldehyde with cysteine peptide:
50 µL of cinnamaldehyde at 100 mM in acetonitrile was incubated with 750 µL of cysteine peptide solution (at 0.667 mM in phosphate buffer at pH 7.5) and 200 µL of acetonitrile.
For the reactivity of cinnamaldehyde with lysine peptide:
In parallel, 250 µL of cinnamaldehyde at 100 mM in acetonitrile was incubated with 750 µL of lysine peptide solution (at 0.667 mM in ammonium acetate at pH 10.2).
Test item samples preparation
For the reactivity of test item with cysteine peptide:
50 µL of test item formulation was incubated with 750 µL of cysteine peptide solution (at 0.667 mM in phosphate buffer at pH 7.5) and 200 µL of acetonitrile.
For the reactivity of test item with lysine peptide:
In parallel, 250 µL of test item formulation was incubated with 750 µL of lysine peptide solution (at 0.667 mM in ammonium acetate at pH 10.2).
Preparation of additional test item neat samples
For reactivity of the test item with cysteine peptide:
50 µL of test item was incubated with 750 µL of cysteine peptide solution (at 0.667 mM in phosphate buffer at pH 7.5) and 200 µL of acetonitrile.
For reactivity of the test item with lysine peptide:
In parallel, 250 µL of test item was incubated with 750 µL of lysine peptide solution (at 0.667 mM in ammonium acetate at pH 10.2).
Incubation of the samples
All samples (co-elution controls, reference controls, test item and positive control samples) were then incubated during 24 (± 2) hours at 25 °C and protected from light before injection into the HPLC/UV system.
At the end of the incubation period, a visual inspection of the samples was performed prior to HPLC analysis to detect precipitate or phase separation (see Results).
As no precipitate was observed, the vials were directly transferred onto the HPLC/UV system.
Preparation of the calibration curve samples
One set of calibration standards was prepared with each analytical sequence by spiking each peptide (lysine and cysteine) in separate solutions of 20% acetonitrile:peptide dilution buffer to obtain at least six different concentration levels ranging from 0.0167 to 0.534 mM. A dilution buffer blank was also included in the standard calibration curve.
The calibration curves were defined by the relationships between the peak area signal of the peptide versus the nominal concentration. These curves were obtained by using the appropriate mathematical model.
HPLC/UV ANALYSIS OF THE SAMPLES
The study samples were assayed in batches using HPLC/UV analysis.
For each peptide, the analytical sequence included at least:
- one blank sample (peptide dilution buffer),
- one calibration curve injected at the beginning of the analytical batch,
- three reference control A samples,
- the co-elution control sample
- three reference control B samples,
- reference control C sample (replicate 1),
- positive control sample (replicate 1),
- test item study sample (replicate 1),
- additional neat test item sample (replicate 1).
The injection order of the reference control C, positive control and all test item study samples were reproduced identically for replicate 2 and then replicate 3:
- three reference control B samples.
DATA ANALYSIS AND CALCULATION
Calculation of the percentage peptide depletion
Each appropriate peak was integrated and the peak area for calibration standards, control and test item samples were determined. Based on the concentration of standards and their peak area, a linear calibration curve was generated. Then, the concentration of peptide was determined in each sample from absorbance at 220 nm, measuring the peak area of the appropriate peaks and calculating the concentration of peptide using the linear calibration curves. Then, for each positive control and test item replicate, the percentage depletion of peptide was determined from the peptide peak area of the replicate injection and the mean peptide peak area in the three relevant reference control C samples (in the appropriate vehicle) by using the following formula:
% depletion = [ 1 – (Peptide peak area in replicate injection / Mean peptide peak area in relevant reference control C samples) ] x 100
Then, the mean percentage depletion of the three replicates was calculated for each peptide as well as the mean of the percentage cysteine and percentage lysine depletions. Negative depletion values were considered as "Zero" for the calculation of the mean % depletion.
Peak areas and peptide concentrations are presented in the report. Standard Deviation (SD) and Coefficient of Variation (CV) were calculated and reported.
Evaluation of the possible co-elution of the test item with the lysine or cysteine peptides
In order to detect possible co elution of the test items with a peptide, chromatograms of the co-elution control samples were analyzed and compared with those of the reference control C samples.
ACCEPTANCE CRITERIA
The run was considered valid if the following criteria were fully met:
- the calibration curves should have a coefficient of determination (r2) ≥ 0.99,
- the mean peptide concentrations of the reference control A samples should be within ± 10% of the nominal concentration,
- the cinnamaldehyde depletion control samples should meet the following acceptance criteria:
- for the cysteine peptide, the mean percentage depletion value should be between 60.8 and 100% with a SD < 14.9%,
- for the lysine peptide, the mean percentage depletion value should be between 40.2 and 69.0% with a SD < 11.6%,
- the CV of the mean peptide peak area of the nine reference control B and C samples in acetonitrile must be < 15.0%.
The test item’s results were considered valid if the following criteria were fully met:
- the mean peptide concentrations of the reference control C samples prepared in the appropriate vehicle should be within ± 10% of the nominal concentration
- the maximum SD for the test item replicates should be < 14.9% for the percentage cysteine depletion value and < 11.6% for the percentage lysine depletion value.
Results and discussion
- Positive control results:
- The acceptance criteria for the positive controls were satisfied.
In vitro / in chemico
Resultsopen allclose all
- Run / experiment:
- other: 1
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 0
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: Value set to zero for negative depletion
- Run / experiment:
- other: 2
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 3.39
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- other: 3
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 5.26
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- mean
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 2.88
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- other: 1
- Parameter:
- other: lysine peptide depletion (%)
- Value:
- 0
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: Value set to 0 due to negative depletion
- Run / experiment:
- other: 2
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 0
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: Value set to 0 due to negative depletion
- Run / experiment:
- other: 3
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 0.1
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- mean
- Parameter:
- other: cysteine peptide depletion (%)
- Value:
- 0.03
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- mean
- Parameter:
- other: neat test item cysteine peptide depletion (%) (calculated)
- Value:
- 1.02
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Run / experiment:
- mean
- Parameter:
- other: neat test item lysine peptide depletion (%) (calculated)
- Value:
- 0
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- The acceptance criteria for the calibration curve samples, the reference and positive controls as well as for the study samples were satisfied. The study was therefore considered to be valid.
Any other information on results incl. tables
SOLUBILITY RESULTS
The test item was found soluble at 100 mM in acetonitrile. Therefore, this vehicle was selected for the present study.
EVALUATION OF THE PRESENCE OF PRECIPITATE AT THE END OF THE INCUBATION WITH PEPTIDES
At the end of the incubation period, a visual inspection of all samples (co-elution controls, reference controls, test item and positive control samples) was performed prior to HPLC analysis.
As precipitate was observed in the test item samples incubated with the cysteine, these vials were centrifuged at 400g for a period of 5 minutes at room temperature to force precipitate to the bottom of the vial. Positive control samples incubated in both cysteine and lysine peptides and reference control samples (prepared in acetonitrile:milli‑Q water and in acetonitrile) incubated in the cysteine peptide were also centrifuged at the same conditions to force precipitate to the bottom of the vials. Only supernatants were then injected into the HPLC/UV system.
For the other samples, the vials were directly transferred into the HPLC/UV system.
EVALUATION OF THE RESULTS
The acceptance criteria for the calibration curve samples, the reference and positive controls as well as for the study samples were satisfied. The study was therefore considered to be valid.
Analysis of the chromatograms of the co-elution samples indicated that the test item did not co-elute with either the lysine or the cysteine peptides. As a result, the mean percentage depletion values were calculated for each peptide using the formula described in Data analysis and calculation:
- for the cysteine peptide, the mean depletion value was 2.88%,
- for the lysine peptide, the mean depletion value was 0.03%.
The mean of the percentage cysteine and percentage lysine depletions was equal to 1.46%. Accordingly, the test item was considered to have no or minimal peptide reactivity.
Since the test item was a multi-constituent substance, the reactivity of the neat test item was also evaluated.
The mean percent depletion values for the neat test item were calculated for each peptide using the formula described in Data analysis and calculation:
- for the cysteine peptide, the mean depletion value was 1.02%,
- for the lysine peptide, the mean depletion value was 0.00%.
The mean of the percent cysteine and percent lysine depletions with the test item neat was equal to 0.51%. These results confirm those obtained with test item prepared at 100 mM (no or minimal peptide reactivity).
Therefore, the DPRA prediction is considered as negative and the test item may have no potential to cause skin sensitization. However, since precipitates were observed at the end of the incubation with the cystein peptide, the peptide depletion may be underestimated.
This negative result can be used to support the discrimination between skin sensitizers and non-sensitizers in the context of an integrated approach to testing and assessment. It cannot be used on its own to conclude on a skin sensitization potential of the test item.
RESULTS TABLES AND FIGURES
Results for the test item and the positive control are presented in Tables 1 and 2, respectively. The peakareas for calibration curve samples are presented in Tables 3.1 and 3.2, the peptide concentrations and peak areas in reference control samples are presented in Tables 4.1 and 4.2.
Representative chromatograms of the co-elution, reference control C and test item samples are presented for each peptide in Figures 1 to 8.
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- Under the experimental conditions of this study, the DPRA prediction is considered as negative and the test item AMYL BUTYRATE, was considered to have no or minimal peptide reactivity, though with limitations due to its precipitation with the cysteine peptide.
- Executive summary:
The objective of this study was to evaluate the reactivity of the test item, AMYL BUTYRATE, to synthetic cysteine and lysine peptides. This test addresses the molecular initiating event of the skin sensitisation adverse outcome pathway (AOP) and is part of a tiered strategy for skin sensitization assessment.
The reactivity of the test item was evaluated in chemico by monitoring peptide depletion following a 24-hour contact between the test item and synthetic cysteine and lysine peptides. The method consisted of the incubation of a diluted solution of cysteine or lysine with the test item for 24 hours, protected from light. At the end of the incubation, the concentrations of residual peptides were evaluated by HPLC with Ultra-Violet detection at 220 nm.
Peptide reactivity was reported as percentage depletion basedon the peptide peak area of the replicate injection and the mean peptide peak area in the three relevant reference control C samples (in the appropriate vehicle).
The acceptance criteria for the calibration curve samples, the reference and positive controls as well as for the study samples were satisfied. The study was therefore considered to be valid.
The reactivity of the test item at 100 mM in acetonitrile was first evaluatedand the mean of the percentage cysteine and percentage lysine depletions was equal to 1.46%.
Since the test item is a multi-constituent substance, the reactivity of the neat test item was also evaluated.
The mean of the percent cysteine and percent lysine depletions with the neat test item was equal to 0.51%. Accordingly, the test item was considered to have no or minimal peptide reactivity.
Precipitates were observed at the end of the incubation with the cystein peptide in both assays (100 mM and neat), the peptide depletion may be thus underestimated.
Therefore, the DPRA prediction is considered as negative and the test item may have no potential to cause skin sensitization, though with limitations due to its precipitation with the cysteine peptide.
This negative result can be used to support the discrimination between skin sensitizers and non-sensitizers in the context of an integrated approach to testing and assessment. It cannot be used on its own to conclude on a skin sensitization potential of the test item.
Under the experimental conditions of this study, the DPRA prediction is considered as negative and the test item AMYL BUTYRATE, was considered to have no or minimal peptide reactivity, though with limitations due to its precipitation with the cysteine peptide.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.