Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-718-1 | CAS number: 1345-13-7
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- other: EC Regulation No.440/2008 Appendix A.10 Flammability(Solids)
- Principles of method if other than guideline:
- The test is carried out according to 33.2.1.4 in “EC Regulation No.440/2008 Appendix A.10 FLAMMABILITY(SOLIDS)”. The sample is formed a train by a specified mould; then burn one end of the train, observe and record the phenomena of combustion and the burning time.
- GLP compliance:
- no
- Other quality assurance:
- ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- >= 45 s
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Conclusions:
- The sample is not a flammable solid.
Reference
The method of assessing result is shown in Table3,where the mark“√”means a positiveresult.
Table 3 Assessment of the testing result
No. |
Preliminary screening test |
Burning rate test |
Conclusions |
|||
The train can not ignite |
The train can ignite |
The burning time of each of the test runs is more than 45 s or the burning rate is less than 2.2 mm/s. |
The burning time of one or more of the testruns is less than 45 s or the burning rate is more than 2.2 mm/s. |
|||
not propagate combustion for 200 mm within 2min |
can propagate combustion for 200 mm within 2min |
|||||
1 |
√ |
|
|
|
|
Not a flammable solid |
2 |
|
√ |
|
|
|
Not a flammable solid |
3 |
|
|
√ |
√ |
|
Not a flammable solid |
4 |
|
√ |
A flammable solid |
|||
5 The test phenomena and results
It can be ascertained that the sample is not a flammable solid based on the results of the preliminary screening test.
Description of key information
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
The sample is not a flammable solid.
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
