Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 237-580-1 | CAS number: 13846-31-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 18 April 2018 to 23 April 2018 (Experimental start to experimental end)
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Test item name: MDAC (Diallyl hexahydrophthalate)
- Source of test material: Osaka Soda Co., Ltd. Japan
- Lot/batch No.of test material: 40201
- Expiration date of the lot/batch: 26 January 2019
- Purity test date: 26 September 2017
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Controlled at room temperature, protected from light
- Stability under test conditions: Assumed stable for the durationj of the test
- Solubility and stability of the test substance in the solvent/vehicle: Not relavent
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: Not relavent
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: None - Radiolabelling:
- no
- Analytical monitoring:
- yes
- Details on sampling:
- - Sampling intervals for the parent/transformation products:
- Sampling method: 250 mL sterile solutions were prepared (50 μg/mL of test item concentration in each buffer with 1% ACN content). The solutions were ultrasonicated and filtered on 0.22 μm filter. The pH of each buffer solution was checked with a calibrated pH meter.
Solutions were transferred into screw cap tubes. Three from each test solution and one control tubes were prepared. The tubes were thermostated at 49.5 – 49.9°C. The reaction solutions were analysed at the start of the test with five replicate samples and after five days with two replicate samples per tubes. The 5 day samples were cooled to room temperature. Samples for the start were diluted with eluent 10 fold and for the
end 5 fold, then they were analysed with the above presented HPLC-UV method. The control samples were analysed directly, without any dilution.
- Sampling intervals/times for pH measurements: Experimental satrt and at 5 days
- Sampling intervals/times for sterility check: Not specified
- Sample storage conditions before analysis: None
- Other observation, if any (e.g.: precipitation, color change etc.): None specified - Preliminary study:
- RESULTS OF THE METHOD VALIDATION (17/277-316AN)
Selectivity: No interfering component was observed
Reinjection repeatability (7 injections): CV% ≤ 0.7%
Linear range: 0.5 – 50 μg/mL
Limit of Quantification (LOQ): 0.5 μg/mL
Recovery of the test item from pH 4 buffer (50 mg/L): 99%
Recovery of the test item from pH 7 buffer (50 mg/L): 94%
Recovery of the test item from pH 9 buffer (50 mg/L): 92%
Precision in pH 4 buffer: 1.2%
Precision in pH 7 buffer: 2.7%
Precision in pH 9 buffer: 1.2%
Stability of the samples in the autosampler: At least 97 hours
Stock solution stability at 5 ± 3°C: At least 4 days
TEST CONDITIONS
250 mL sterile solutions were prepared (50 μg/mL of test item concentration in each buffer with 1% ACN content). The solutions were ultrasonicated and filtered on 0.22 μm filter. The pH of each buffer solution was checked with a calibrated pH meter.
Solutions were transferred into screw cap tubes. Three from each test solution and one control tubes were prepared. The tubes were thermostated at 49.5 – 49.9°C. The reaction solutions were analysed at the start of the test with five replicate samplesand after five days with two replicate samples per tubes. The 5 day samples were cooled to room temperature. Samples for the start were diluted with eluent 10 fold and for the end 5 fold, then they were analysed with the above presented HPLC-UV method. The control samples were analysed directly, without any dilution. - Transformation products:
- no
- Key result
- pH:
- 4
- Remarks on result:
- hydrolytically stable based on preliminary test
- Key result
- pH:
- 7
- Remarks on result:
- hydrolytically stable based on preliminary test
- Key result
- pH:
- 9
- Remarks on result:
- hydrolytically stable based on preliminary test
- Details on results:
- TEST CONDITIONS
- pH, sterility, temperature, and other experimental conditions maintained throughout the study: Yes
Test temperature: 49.5 – 49.9°C
Hydrolysis was examined at three different pH values: 4, 7 and 9 in the dark.
Buffer solutions:
pH 4.0: 1 mL 0.2 M Sodium hydroxide and 125 mL 0.2 M Potassium hydrogen
phthalate was diluted to 500 mL with ultrapure water
pH 7.0: 73.9 mL 0.2M Sodium hydroxide and 125 mL 0.2M Potassium dihydrogen
phosphate was diluted to 500 mL with ultrapure water
pH 9.0: 53.5 mL 0.2 M Sodium hydroxide and 125 mL 0.2 M Boric acid and Potassium
chloride was diluted to 500 mL with ultrapure water
These sterile buffer solutions were prepared using reagent grade chemicals and ultrapure,
sterile water.
The pH of each buffer solution was checked with a calibrated pH meter.
The hydrolysis reaction was carried out using a dark thermostat to avoid photolyticeffects.
Nitrogen was bubbled into the water before the preparation of the solutions in
order to exclude oxygen.
Calibration: The calibration series was prepared from stock solution (~0.5 mg Test Item / 1 mL acetonitrile) and working solution (50 μg/mL) with eluent. It was measured at every analytical occasions. Concentrations of the calibration samples were 0.5, 1, 2, 5, 10, 25 and 50 μg/mL.
Summary of Standard Curve Parameters:
Analytical occasion Intercept Slope Correlation Coefficient
18 April 2018 0.195 3.78 1.0000
23 April 2018 0.444 3.71 1.0000
The hydrolysis test was performed at 49.5 – 49.9°C, at pH 4, 7 and 9. - Validity criteria fulfilled:
- yes
- Conclusions:
- In the course of the preliminary test the observed hydrolysis of MDAC was less than 10% after 5 days at 50 ± 0.5°C at pH 4 and 7, therefore it is considered to be hydrolytically stable under these conditions.
However, 45% of hydrolysis was observed at pH 9 under the same conditions, therefore further additional testing is required for the determination of hydrolysis of MDAC at pH 9 under Study code: 17/277-336AN. - Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 23 July to 23 August 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Deviations:
- yes
- Remarks:
- They had no effect on the result of the study.
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Deviations:
- yes
- Remarks:
- They had no effect on the result of the study.
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: Osaka Soda / 40201
- Expiration date of the lot/batch: 26 Jan 2019
- Purity test date: 26 Sept 2017
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Controlled room temperature, protected from light
- Stability under test conditions: no data
- Solubility and stability of the test substance in the solvent/vehicle: no data
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: no data
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: none
- Preliminary purification step (if any): none
- Final dilution of a dissolved solid, stock liquid or gel: n/a
- Final preparation of a solid: n/a
OTHER SPECIFICS:
- measurement of pH, osmolality, and precipitate in the culture medium to which the test chemical is added: none
- other information: none - Radiolabelling:
- no
- Analytical monitoring:
- yes
- Details on sampling:
- Three or two sample vials were removed with one control sample and analysed at each analytical occasion. pH of the samples was checked. At the end of the test three tubes were submitted for sterility confirmation.
- Buffers:
- Buffer solution pH 9: 428 mL of 0.2 M Sodium hydroxide and 1000 mL of 0.2 M Boric acid and 0.2 M Potassium chloride was diluted to 4000 mL with ultrapure water.
- Details on test conditions:
- Test solution: Approximately 250 mg of Test Item was dissolved in 50 mL of ACN. 30 mL of this stock solution (~ 5 mg/mL in ACN) was filled up to 3000 mL with pH 9 buffer solution (~ 50 mg/L in pH 9 buffer with 1% ACN content.) Test solution was sterilised by filtering on a 0.22 µm Millipore filter (Steritop). The pH of the solutions was checked with a calibrated pH meter.
- Duration:
- 742 h
- pH:
- 9
- Temp.:
- 25 °C
- Initial conc. measured:
- 50.7 other: µg/ml
- Duration:
- 504 h
- pH:
- 9
- Temp.:
- 50 °C
- Initial conc. measured:
- 50.7 other: µg/ml
- Duration:
- 161 h
- pH:
- 9
- Temp.:
- 67 °C
- Initial conc. measured:
- 50.7 other: µg/ml
- Number of replicates:
- 1
- Positive controls:
- no
- Negative controls:
- no
- Transformation products:
- no
- % Recovery:
- 83
- pH:
- 9
- Temp.:
- 25 °C
- Duration:
- 742 h
- % Recovery:
- 14
- pH:
- 9
- Temp.:
- 50 °C
- Duration:
- 504 h
- % Recovery:
- 8
- pH:
- 9
- Temp.:
- 67 °C
- Duration:
- 161 h
- Key result
- pH:
- 9
- Temp.:
- 25 °C
- DT50:
- 97.8 d
- Type:
- second order
- Key result
- pH:
- 9
- Temp.:
- 50 °C
- DT50:
- 7.6 d
- Type:
- second order
- Key result
- pH:
- 9
- Temp.:
- 67 °C
- DT50:
- 1.7 d
- Type:
- second order
- Validity criteria fulfilled:
- not specified
- Conclusions:
- Based on the results of Tier 1, the hydrolysis rate of MDAC was investigated at pH 9 at 3 different temperatures. The Kobs values and the half-lives of the reaction were determined at 25, 50 and 67°C. The half-lives of the hydrolysis of MDAC at pH 9 were 2348 hours at 25°C, 183 hours at 50°C and 41 hours at 67°C.
Referenceopen allclose all
pH |
Sampling time (day) |
Concentration of Test Item (μg/mL) |
Mean of the measured pH |
||
Results of the separate test vessels |
Mean with the 95% confidence intervals (μg/mL) |
End/Start (%) |
|||
4.0 |
0 (start) |
Control buffer |
- |
4.01 |
|
50.1 |
49.8 ± 0.35 |
- |
4.01 |
||
49.9 |
|||||
49.6 |
|||||
49.9 |
|||||
49.4 |
|||||
5 |
Control buffer |
- |
4.05 |
||
50.1 |
50.2 ± 0.16 |
101 |
4.05 |
||
50.1 |
|||||
50.1 |
|||||
50.1 |
|||||
50.5 |
|||||
50.2 |
|||||
7.0 |
0 (start) |
Control buffer |
- |
6.99 |
|
50.3 |
50.4 ± 0.24 |
- |
6.99 |
||
50.3 |
|||||
50.7 |
|||||
50.4 |
|||||
50.3 |
|||||
5 |
Control buffer |
- |
7.03 |
||
51.5 |
50.4 ± 0.63 |
100 |
7.05 |
||
50.1 |
|||||
50.0 |
|||||
49.9 |
|||||
50.5 |
|||||
50.1 |
|||||
9.0 |
0 (start) |
Control buffer |
- |
9.00 |
|
50.5 |
50.2 ± 0.30 |
- |
9.00 |
||
50.0 |
|||||
49.9 |
|||||
50.4 |
|||||
50.3 |
|||||
5 |
Control buffer |
- |
9.15 |
||
29.1 |
27.7 ± 0.70 |
55 |
9.21 |
||
27.6 |
|||||
27.3 |
|||||
27.4 |
|||||
27.5 |
|||||
27.6 |
Description of key information
This substance is hydrolytically stable.
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 97.8 d
- at the temperature of:
- 25 °C
Additional information
Based on the results of Tier 1, the hydrolysis rate of MDAC was investigated at pH 9 at 3 different temperatures. The kobsvalues and the half-lives of the reaction were determined at 25, 50 and 67°C. The half-lives of the hydrolysis of MDAC at pH 9 were 2348 hours at 25°C, 183 hours at 50°C and 41 hours at 67°C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.