Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 816-285-7 | CAS number: 1263133-33-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: U. S. EPA, Fate, Transport and Transformation Test Guidelines, OPPTS 835.1230, “Adsorption/Desorption (Batch Equilibrium)”, October 2008.
- Deviations:
- no
- GLP compliance:
- yes
- Type of method:
- batch equilibrium method
- Media:
- soil
- Radiolabelling:
- yes
- Test temperature:
- 20 ± 2°C
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: To determine test item stability, 50 to 200 µL aliquot of the adsorption supernatant of one replicate of each soil from the highest test concentration (nominal 5-µg/mL) was analysed
- Sample storage before analysis: Test item stock solution and the treatment solutions were all stored frozen. The aqueous and soil phase samples were all stored frozen after collection. - Matrix no.:
- #1
- Matrix type:
- sandy loam
- % Clay:
- 9
- % Silt:
- 29
- % Sand:
- 62
- % Org. carbon:
- 1.7
- pH:
- 7.6
- CEC:
- 9.8 meq/100 g soil d.w.
- Bulk density (g/cm³):
- 1.12
- Matrix no.:
- #2
- Matrix type:
- silty clay loam
- % Clay:
- 36
- % Silt:
- 54
- % Sand:
- 10
- % Org. carbon:
- 1.9
- pH:
- 5.9
- CEC:
- 18.6 meq/100 g soil d.w.
- Bulk density (g/cm³):
- 1.02
- Matrix no.:
- #3
- Matrix type:
- clay
- % Clay:
- 47
- % Silt:
- 39
- % Sand:
- 14
- % Org. carbon:
- 2
- pH:
- 7.5
- CEC:
- 17.4 meq/100 g soil d.w.
- Bulk density (g/cm³):
- 1.06
- Matrix no.:
- #4
- Matrix type:
- loam
- % Clay:
- 14
- % Silt:
- 50
- % Sand:
- 36
- % Org. carbon:
- 1.2
- pH:
- 7
- CEC:
- 11.3 meq/100 g soil d.w.
- Bulk density (g/cm³):
- 1.15
- Matrix no.:
- #5
- Matrix type:
- sandy loam
- % Clay:
- 2
- % Silt:
- 32
- % Sand:
- 66
- % Org. carbon:
- 3.1
- pH:
- 5.4
- CEC:
- 8.2 meq/100 g soil d.w.
- Bulk density (g/cm³):
- 1.09
- Details on matrix:
- COLLECTION AND STORAGE
- Soil preparation: Prior to use, the test soils were air-dried and sieved through a 2-mm sieve. Triplicate 5-g aliquots of each soil were dried overnight in an oven at approximately 105°C.
- Details on test conditions:
- TEST SYSTEM
- Type, size and further details on reaction vessel: The test system consisted of individually capped test vessels containing the soil and the test solution, continuously agitated using a mechanical shaker to keep the soil in suspension during equilibration.
- Number of reaction vessels/concentration: 5 duplicates were used.
- Method of preparation of test solution: The stock solution was prepared in acetonitrile. The required volume of stock solution was evaporated to dryness using a gentle stream of nitrogen. The residue was reconstituted with aqueous 0.01 M CaCl2 solution.
- Are the residues from the adsorption phase used for desorption: Yes
- Soil-to-Solution Ratio: 1 : 4 - Sample No.:
- #1
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg a.i./mL
- Temp.:
- 20 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.1, 0.5, 1 and 5 µg/mL
- Sample No.:
- #2
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg a.i./mL
- Temp.:
- 20 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.1, 0.5, 1 and 5 µg/mL
- Sample No.:
- #3
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg a.i./mL
- Temp.:
- 20 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.1, 0.5, 1 and 5 µg/mL
- Sample No.:
- #4
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg a.i./mL
- Temp.:
- 20 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.1, 0.5, 1 and 5 µg/mL
- Sample No.:
- #5
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg a.i./mL
- Temp.:
- 20 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.1, 0.5, 1 and 5 µg/mL
- Sample no.:
- #1
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 36.13 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 1
- Sample no.:
- #1
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 35.68 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 2
- Sample no.:
- #2
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 67.18 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 1
- Sample no.:
- #2
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 68.05 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 2
- Sample no.:
- #3
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 41.92 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 1
- Sample no.:
- #3
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 40.32 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 2
- Sample no.:
- #4
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 37.51 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 1
- Sample no.:
- #4
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 39.21 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 2
- Sample no.:
- #5
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 61.04 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 1
- Sample no.:
- #5
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 58.4 other: µg
- Temp.:
- 20 °C
- Remarks:
- Replicate 2
- Key result
- Sample No.:
- #1
- Type:
- Kd
- Value:
- 3.78 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Nambsheim (sandy loams)
- % Org. carbon:
- 1.7
- Key result
- Sample No.:
- #2
- Type:
- Kd
- Value:
- 11.9 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Tama (silty clay loam)
- % Org. carbon:
- 1.9
- Key result
- Sample No.:
- #3
- Type:
- Kd
- Value:
- 4.23 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Lleida (clay)
- % Org. carbon:
- 2
- Key result
- Sample No.:
- #4
- Type:
- Kd
- Value:
- 4.14 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Gross-Umstadt (loam)
- % Org. carbon:
- 1.2
- Key result
- Sample No.:
- #5
- Type:
- Kd
- Value:
- 10.3 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Sassafras (sandy loams)
- % Org. carbon:
- 3.1
- Key result
- Sample No.:
- #1
- Type:
- Koc
- Value:
- 223 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Nambsheim (sandy loams)
- % Org. carbon:
- 1.7
- Key result
- Sample No.:
- #2
- Type:
- Koc
- Value:
- 629 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Tama (silty clay loam)
- % Org. carbon:
- 1.9
- Key result
- Sample No.:
- #3
- Type:
- Koc
- Value:
- 212 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Lleida (clay)
- % Org. carbon:
- 2
- Key result
- Sample No.:
- #4
- Type:
- Koc
- Value:
- 345 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Gross-Umstadt (loam)
- % Org. carbon:
- 1.2
- Key result
- Sample No.:
- #5
- Type:
- Koc
- Value:
- 333 other: mL/g
- Temp.:
- 20 °C
- Matrix:
- Sassafras (sandy loams)
- % Org. carbon:
- 3.1
- Adsorption and desorption constants:
- The Kd values ranged from 2.13-5.23 mL/g in the Nambsheim soil, 7.57-16.4 mL/g in the Tama soil, 2.58-5.68 mL/g in the Lleida soil, 2.30-5.60 mL/g in the Gross-Umstadt soil and 5.72-14.0 mL/g in the Sassafras soil. The adsorption coefficients were normalized to the organic matter and organic carbon contents for each test soil to calculate the soil sorption coefficients Kom and Koc, respectively. The Kom values ranged from 73.4-180 mL/g in the Nambsheim soil, 229-497 mL/g in the Tama soil, 73.7-162 mL/g in the Lleida soil, 115-280 mL/g in Gross-Umstadt soil and 106-259 mL/g in the Sassafras soil, while the Koc values ranged from 125-308 mL/g in the Nambsheim soil, 398-863 mL/g in the Tama soil, 129-284 mL/g in the Lleida soil, 192-467 mL/g in the Gross-Umstadt soil and 185-452 mL/g in the Sassafras soil.
The value of the Freundlich adsorption isotherm parameter, KF, was 2.75, 8.51, 3.28, 3.06 and 7.19 for the Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The KFom values were 94.8, 258, 93.7, 153 and 133 while the KFoc values were 162, 448, 164, 255 and 232 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The values for the Freundlich constant, 1/n, were 0.8219, 0.8620, 0.8582, 0.8337 and 0.8485 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The correlation coefficient (R²) for the analyses were 0.9989, 0.9995, 0.9991, 0.9977 and 0.9976 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively, for the adsorption phase, indicating the Freundlich equation adequately predicts the adsorption of the test item over the concentration range studied.
The mean desorption Kd, values ranged from 3.33 mL/g in the Nambsheim soil to 11.0 mL/g in the Tama soil. The mean desorption Kd,om values ranged from 110 mL/g in the Lleida soil to 333 mL/g in the Tama soil. The mean desorption Kd,oc values ranged from 192 mL/g in the Lleida soil to 579 mL/g in the Tama soil. - Sample no.:
- #1
- Duration:
- 48 h
- % Desorption:
- 61.6
- Remarks on result:
- other: total % desorbed
- Sample no.:
- #2
- Duration:
- 48 h
- % Desorption:
- 39
- Remarks on result:
- other: total % desorbed
- Sample no.:
- #3
- Duration:
- 48 h
- % Desorption:
- 58
- Remarks on result:
- other: total % desorbed
- Sample no.:
- #4
- Duration:
- 48 h
- % Desorption:
- 58.7
- Remarks on result:
- other: total % desorbed
- Sample no.:
- #5
- Duration:
- 48 h
- % Desorption:
- 43.4
- Remarks on result:
- other: total % desorbed
- Transformation products:
- no
- Details on results (Batch equilibrium method):
- PRELIMINARY TEST
- Sample purity: 100.00%
- Volume of CaCl2 solution: 18 to 20mL
- Initial test substance concentration: 5.736 µg/mL
- Test substance concentration in final solution: 5.603 µg/mL
MAIN TEST: PERFORMANCE
- Test material stability during adsorption/desorption phase: 100.00%
- Experimental conditions maintained throughout the study: Yes - Conclusions:
- The Kd values ranged from 2.13-5.23 mL/g in the Nambsheim soil, 7.57-16.4 mL/g in the Tama soil, 2.58-5.68 mL/g in the Lleida soil, 2.30-5.60 mL/g in the Gross-Umstadt soil and 5.72-14.0 mL/g in the Sassafras soil.
The total percent desorbed (DT) values ranged from 39.0% in the Tama soil to 61.6% in the Nambsheim soil. In general, lower desorption values were observed in second desorption interval. The highest desorption was observed in Nambsheim and Gross-Umstadt soils in first and second desorption intervals respectively. In both the desorption intervals, the lowest desorption was observed in Tama soil. - Executive summary:
The adsorption and desorption properties of test substance to five different soils were investigated in the laboratory. The adsorption coefficients (Kd, Kom, and Koc), the desorption coefficients (Kd1, Kd2, Kd1,om, Kd1,oc, Kd2,om and Kd2,oc) and the Freundlich adsorption isotherm parameters (KF, KFom, KFoc and 1/n) were calculated.
The texture of the soils included two sandy loams (Nambsheim and Sassafras), a silty clay loam (Tama), a clay (Lleida) and a loam (Gross-Umstadt). The per cent organic matter (Walkley-Black method) of the soils ranged from 2.0 to 5.4% and the pH in aqueous 0.01 M CaCl2 ranged from 5.1 to 7.5.
The study was conducted as per procedures outlined in OECD Guideline 106 and U. S. EPA test guidelines OPPTS 835.1230.
The adsorption experiment was performed using the batch equilibration method on the soils with five nominal test concentrations (0.05, 0.1, 0.5, 1 and 5 µg/mL) of the test item prepared in aqueous 0.01 M CaCl2. Two desorption cycles were performed on samples treated at the highest test concentration. A 1:4 (w/v) soil-to- solution ratio was used in the preliminary and definitive experiments. The sorption coefficients Kd, Kom and Koc were calculated for each soil at each test concentration.
The Kd values ranged from 2.13-5.23 mL/g in the Nambsheim soil, 7.57-16.4 mL/g in the Tama soil, 2.58-5.68 mL/g in the Lleida soil, 2.30-5.60 mL/g in the Gross-Umstadt soil and 5.72-14.0 mL/g in the Sassafras soil. The adsorption coefficients were normalized to the organic matter and organic carbon contents for each test soil to calculate the soil sorption coefficients Kom and Koc, respectively. The Kom values ranged from 73.4-180 mL/g in the Nambsheim soil, 229-497 mL/g in the Tama soil, 73.7-162 mL/g in the Lleida soil, 115-280 mL/g in Gross-Umstadt soil and 106-259 mL/g in the Sassafras soil, while the Koc values ranged from 125-308 mL/g in the Nambsheim soil, 398-863 mL/g in the Tama soil, 129-284 mL/g in the Lleida soil, 192-467 mL/g in the Gross-Umstadt soil and 185-452 mL/g in the Sassafras soil.
The value of the Freundlich adsorption isotherm parameter, KF, was 2.75, 8.51, 3.28, 3.06 and 7.19 for the Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The organic matter and organic carbon normalized Freundlich adsorption isotherm coefficients KFom and KFoc, respectively, were calculated for all the soils. The KFom values were 94.8, 258, 93.7, 153 and 133 while the KFoc values were 162, 448, 164, 255 and 232 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The values for the Freundlich constant, 1/n, were 0.8219, 0.8620, 0.8582, 0.8337 and 0.8485 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively. The correlation coefficient (R²) for the analyses were 0.9989, 0.9995, 0.9991, 0.9977 and 0.9976 for Nambsheim, Tama, Lleida, Gross-Umstadt and Sassafras soils, respectively, for the adsorption phase, indicating the Freundlich equation adequately predicts the adsorption of the test item over the concentration range studied.
The mean desorption Kd, values ranged from 3.33 mL/g in the Nambsheim soil to 11.0 mL/g in the Tama soil. The mean desorption Kd,om values ranged from 110 mL/g in the Lleida soil to 333 mL/g in the Tama soil. The mean desorption Kd,oc values ranged from 192 mL/g in the Lleida soil to 579 mL/g in the Tama soil.
The total per cent desorbed (DT) values ranged from 39.0% in the Tama soil to 61.6% in the Nambsheim soil. In general, lower desorption values were observed in second desorption interval. The highest desorption was observed in Nambsheim and Gross-Umstadt soils in first and second desorption intervals respectively. In both the desorption intervals, the lowest desorption was observed in Tama soil.
- Endpoint:
- adsorption / desorption, other
- Remarks:
- Adsorption Coefficient Study
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: MAFF 12-Nousan-8147
- Deviations:
- no
- GLP compliance:
- no
- Type of method:
- other: Adsorption isothermal test
- Media:
- soil
- Radiolabelling:
- no
- Test temperature:
- 25 ± 2°C
- Analytical monitoring:
- yes
- Matrix no.:
- #1
- Matrix type:
- other: Sandy soil
- % Clay:
- 3.5
- % Silt:
- 5.4
- % Sand:
- 91.1
- pH:
- 6.2
- CEC:
- 4.6 other: cmolc/Kg
- Matrix no.:
- #2
- Matrix type:
- loam
- % Clay:
- 17.9
- % Silt:
- 39.3
- % Sand:
- 42.8
- pH:
- 5.9
- CEC:
- 24.6 other: cmolc/kg
- Matrix no.:
- #7
- Matrix type:
- silty clay
- % Clay:
- 46.6
- % Silt:
- 42.3
- % Sand:
- 11.1
- pH:
- 5.9
- CEC:
- 33.3 other: cmolc/kg
- Matrix no.:
- #8
- Matrix type:
- other: Silty loam
- % Clay:
- 20.8
- % Silt:
- 54.5
- % Sand:
- 24.7
- pH:
- 7
- CEC:
- 24.9 other: cmolc/kg
- Sample No.:
- #1
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg/mL
- Temp.:
- 25 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.2, 1 and 5 µg/mL
- Sample No.:
- #2
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg/mL
- Temp.:
- 25 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.2, 1 and 5 µg/mL
- Sample No.:
- #7
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg/mL
- Temp.:
- 25 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.2, 1 and 5 µg/mL
- Sample No.:
- #8
- Duration:
- 24 h
- Initial conc. measured:
- >= 0.05 - <= 5 other: µg/mL
- Temp.:
- 25 °C
- Remarks:
- Nominal test concentrations: 0.05, 0.2, 1 and 5 µg/mL
- Key result
- Sample No.:
- #1
- Type:
- Kd
- Value:
- 0.907 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Miyazaki (sandy soil)
- Key result
- Sample No.:
- #2
- Type:
- Kd
- Value:
- 1.64 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Saitama Okabe (loam)
- Key result
- Sample No.:
- #7
- Type:
- Kd
- Value:
- 4.3 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Saitama Shiraoka (silty clay)
- Key result
- Sample No.:
- #8
- Type:
- Kd
- Value:
- 3.86 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Ibaraki (silty loam)
- Key result
- Sample No.:
- #1
- Type:
- Koc
- Value:
- 182 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Miyazaki (sandy soil)
- Key result
- Sample No.:
- #2
- Type:
- Koc
- Value:
- 54.3 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Saitama Okabe (loam)
- Key result
- Sample No.:
- #7
- Type:
- Koc
- Value:
- 121 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Saitama Shiraoka (silty clay)
- Key result
- Sample No.:
- #8
- Type:
- Koc
- Value:
- 176 dimensionless
- Temp.:
- 25 °C
- Matrix:
- Ibaraki (silty loam)
- Adsorption and desorption constants:
- The soil adsorption equilibrium constant obtained from the Freundlich adsorption coefficient of the soil and organic carbon content was 89.39, and its correlation coefficient was 0.615.
- Recovery of test material:
- The average recovery rate of added test substance was 101 to 103% when 0.04 µg/mL was added and 99 to 102% when 2.0 µg/mL was added to the aqueous phase, and 95 to 97% when 50 µg was added to the solid phase.
- Sample no.:
- #1
- Duration:
- 24 h
- % Adsorption:
- 95.2
- Remarks on result:
- other: based on the test substance in aqueous phase and solid phase by analyzing the solid phase after 24 hours of stirring when the solution reached equilibrium in the preliminary test (step 1)
- Sample no.:
- #2
- Duration:
- 24 h
- % Adsorption:
- 96.6
- Remarks on result:
- other: based on the test substance in aqueous phase and solid phase by analyzing the solid phase after 24 hours of stirring when the solution reached equilibrium in the preliminary test (step 1)
- Sample no.:
- #7
- Duration:
- 24 h
- % Adsorption:
- 99.4
- Remarks on result:
- other: based on the test substance in aqueous phase and solid phase by analyzing the solid phase after 24 hours of stirring when the solution reached equilibrium in the preliminary test (step 1)
- Sample no.:
- #8
- Duration:
- 24 h
- % Adsorption:
- 99.5
- Remarks on result:
- other: based on the test substance in aqueous phase and solid phase by analyzing the solid phase after 24 hours of stirring when the solution reached equilibrium in the preliminary test (step 1)
- Transformation products:
- no
- Conclusions:
- The soil adsorption equilibrium constant obtained from the Freundlich adsorption coefficient of the soil and organic carbon content was 89.39, and its correlation coefficient was 0.615.
- Executive summary:
The adsorption of the test substance by soil was tested using four types of soil including volcanic ash soil in a laboratory with the temperature of 25 ± 2°C, stirring temperature at 25°C, and centrifuge temperature at 25 ± 2°C as outlined in the guidelines OECD 106 and MAFF 12-Nousan-8147.
The soil adsorption rate of the test substance after 24 hours became 20.8% to 45.0% when the soil-to-solution ratio was 1:2 for #1 Miyazaki and 1:5 for #2 Saitama Okabe, #7 Saitama Shiraoka, and #8 Ibaraki. The same soil-to-solution ratio was used thereafter.
The mass balance after stirring for 24 hours was favourable and ranged between 95.2 and 99.5%. The adsorption rate on the surface of the container was 0.1%.
Changes in adsorption were observed after stirring for 4, 8, 16, and 24 hours. The change rate was -1 to -4% after 16 to 24 hours and reached the equilibrium before 24 hours. The soil adsorption rate after 24 hours was 24.2 to 45.8%. The pH value was 5.7 to 7.6.
Four types of soil were used for the adsorption isothermal test, and test solutions with the test substance concentrations of 5.0, 1.0, 0.2, and 0.05 µg/mL were stirred for 24 hours. The Freundlich adsorption coefficient (Kf) is 0.915 to 4.79. The Freundlich exponent (1/n) was 0.880 to 0.960. The correlation coefficient (r) was 0.999 for all samples.
The organic carbon adsorption coefficient (Koc) was 50.3 to 197. The soil adsorption equilibrium constant obtained from the adsorption isothermal test of four types of soil was 89.39, and its correlation coefficient was 0.615.
Referenceopen allclose all
Description of key information
OECD 106
Key value for chemical safety assessment
- Koc at 20 °C:
- 348.4
Additional information
In the OECD Guideline 106 study, the total percent desorbed (DT) values ranged from 39.0% in the Tama soil to 61.6% in the Nambsheim soil. The Koc in the different soils ranged from 212 to 629 mL/g with an average value of 348.4 mL/g.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.