Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 931-209-3 | CAS number: 1337540-53-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Water solubility
Administrative data
Link to relevant study record(s)
- Endpoint:
- water solubility
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Justification for type of information:
- REPORTING FORMAT FOR THE ANALOGUE APPROACH
1. HYPOTHESIS FOR THE ANALOGUE APPROACH
This read-across is based on the hypothesis that source and target substances have similar (eco)toxicological properties because
• they share structural similarities with common functional groups: One quaternised ethanolamine moiety, one to three, mainly two ester groups with a typical UVCB distribution with long-chain fatty acids of natural origin. The molecular structure is almost identical.
• they are manufactured from similar resp. identical precursors (triethanolamine, long-chain fatty acids, dimethyl sulphate) under similar conditions. Therefore, common breakdown products via physical and biological processes, which result in structurally similar chemicals are evident
• A constant pattern in the changing of the potency of the properties across the TEA-Esterquats by chain-length and the grade of esterification is not observed, because the fatty acid chain-length distribution is too narrow and similar and the distribution of mono-, di-, and tri-esters is identical. Some variation caused by variation in C=C double bonds may occur and will be discussed at the relevant endpoint.
2. SOURCE AND TARGET CHEMICAL(S) (INCLUDING INFORMATION ON PURITY AND IMPURITIES)
See justification for read-across attached to chapter 13 of this IUCLID file.
3. ANALOGUE APPROACH JUSTIFICATION
See justification for read-across attached to chapter 13 of this IUCLID file.
4. DATA MATRIX
See justification for read-across attached to chapter 13 of this IUCLID file. - Reason / purpose for cross-reference:
- read-across: supporting information
- Reason / purpose for cross-reference:
- read-across source
- Water solubility:
- 2 171 mg/L
- Temp.:
- 10 °C
- pH:
- 3.73
- Water solubility:
- 2 244 mg/L
- Temp.:
- 20 °C
- pH:
- 3.86
- Water solubility:
- 2 359 mg/L
- Temp.:
- 30 °C
- pH:
- 3.83
- Conclusions:
- The water solubility of the analogue source test substance "partially unsaturated TEA-Esterquat" was investigated in a study conducted according to OECD Guideline 105 and EU-Method A.6 and using HPLC/MS/MS for quantification. In the main test, on the one hand the test item was dissolved in distilled water and the water solubility was measured at 10, 20, and 30°C without adjustment of the pH and on the other hand the water solubility of the test item was determined in buffered systems (pH 4, 7, and 9) at 20°C. In distilled water the water solubility was not found to be temperature dependent (ws at 10°Cand pH 3.73: 2171 mg/L; ws at 20°C and pH 3.86: 2244 mg/L; ws at 30°C and pH 3.83: 2359 mg/L). Based on the results in buffered systems (ws at 20°C and pH 4.05: 5.30 mg/L; ws at 20°C and pH 7.08:3.39 mg/L; ws at 20°C and pH 9.11: 19.4 mg/L) it can be assumed that the water solubility is dependent on pH. However, due to the bipolarity of the molecules, it is noted that the counter ions phosphate, citrate and borate, respectively obviously have a more distinct influence on solubility than pH, since the solubility is almost three orders of magnitude below that in pure water. Finally, at higher pH values, a change in composition due to hydrolysis may have a greater influence on the absolute solubility of the test item
- Executive summary:
The water solubility of the analogue source test substance "partially unsaturated TEA-Esterquat" was investigated in a study conducted according to OECD Guideline 105 and EU-Method A.6 and using HPLC/MS/MS for quantification. HPLC/MS/MS proved to be a suitable analytical tool. Based on the results of the preliminary test, the flask method was used for the determination of the water solubility. In the main test, on the one hand the test item was dissolved in distilled water and the water solubility was measured at 10, 20, and 30°C without adjustment of the pH and on the other hand the water solubility of the test item was determined in buffered systems (pH 4, 7, and 9) at 20°C. The following results were obtained:
1. Solubility in water without pH adjustment (distilled water being in equilibrium with atmospheric carbon dioxide) at 10, 20, and 30°C: 2171 (pH 3.73, 10°C), 2244 (pH 3.86, 20°C), and 2359 mg/L (pH 3.83, 30°C).The water solubility was not found to be temperature dependent.
2. Solubility in buffered water at pH 4-9 and 20°C: 5.30 (pH 4.05), 3.39 (pH 7.08), and 19.4 mg/L (pH 9.11; at 20°C each). Based on the results in buffered systems it can be assumed that the water solubility is dependent on pH. However, due to the bipolarity of the molecules, it is noted that the counter ions phosphate, citrate and borate, respectively obviously have a more distinct influence on solubility than pH, since the solubility is almost three orders of magnitude below that in pure water. Finally, at higher pH values, a change in composition due to hydrolysis may have a greater influence on the absolute solubility of the test item (see chapter 5.1.2).
It can be expected that the study results are also applicable to the target substance fully saturated TEA-Esterquat.
Reference
Results of the preliminary test (ambient temperature/bi-distilled water): A solution with a nominal concentration of 10 mg test item/L was totally dissolved or dispersed with no apparent precipitate or phase separation after 24 h of shaking. A solution with a nominal concentration of 100 mg test item/L showed un-dissolved solid particles after 24 h of shaking.
Results of the main test
1. Time course of the solubility of partially unsaturated TEA-Esterquat at 10, 20, and 30°C in distilled water (pH not adjusted) in equilibrium to atmospheric carbon dioxide
Temperature in °C |
||||||
Time in h |
10 |
20 |
30 |
|||
mg/L |
pH |
mg/L |
pH |
mg/L |
pH |
|
0 24 48 72 |
1830 2564 2434 1857 |
- 3.70 3.74 3.75 |
1385* 2862 2625 2105 |
- 3.71 3.90 3.97 |
1775 2792 2677 2193 |
- 3.90 3.81 3.78 |
Mean |
2171 |
3.73 |
2244 |
3.86 |
2359 |
3.83 |
Std. Dev. |
382 |
0.03 |
387 |
0.13 |
468 |
0.06 |
RSD in % |
17.6 |
0.80 |
15.3 |
3.37 |
19.8 |
1.57 |
*regarded as outliner
The water solubility was not found to be temperature dependent.
2. Time course of the solubility of partially unsaturated TEA-Esterquat at 20°C in citric acid buffer (pH 4)
Temperature in °C |
||
Time in h |
20 |
|
mg/L |
pH |
|
0 24 48 72 |
5.73 5.01 5.37 5.10 |
- 4.05 4.05 4.04 |
Mean |
5.30 |
4.05 |
Std. Dev. |
0.32 |
0.01 |
RSD in % |
6.0 |
0.25 |
3. Time course of the solubility of partially unsaturated TEA-Esterquat at 20°C in phosphate buffer (pH 7)
Temperature in °C |
||
Time in h |
20 |
|
mg/L |
pH |
|
0 24 48 72 |
2.93 4.74 2.30 3.57 |
- 7.09 7.08 7.08 |
Mean |
3.39 |
7.08 |
Std. Dev. |
1.04 |
0.01 |
RSD in % |
30.7 |
0.14 |
4. Time course of the solubility of partially unsaturated TEA-Esterquat at 20°C in borate buffer (pH 9)
Temperature in °C |
||
Time in h |
20 |
|
mg/L |
pH |
|
0 24 48 72 |
5.03* 20.2 19.8 18.3 |
- 9.06 9.11 9.15 |
Mean |
19.40 |
9.11 |
Std. Dev. |
1.0 |
0.05 |
RSD in % |
5.2 |
0.55 |
*regarded as outliner
Based on the results in buffered systems it can be assumed that the water solubility is dependent on pH. However, due to the bipolarity of the molecules, it is noted that the counter ions phosphate, citrate and borate, respectively obviously have a more distinct influence on solubility than pH, since the solubility is almost three orders of magnitude below that in pure water. Finally, at higher pH values, a change in composition due to hydrolysis may have a greater influence on the absolute solubility of the test item (see chapter 5.1.2).
Description of key information
Solubility in water at 20°C: 2244 mg/L (pH 3.86 )
5.30 mg/L (pH 4.05)
3.39 mg/L (pH 7.08)
Key value for chemical safety assessment
- Water solubility:
- 3.39 mg/L
- at the temperature of:
- 20 °C
Additional information
No experimental data are available for the target substance fully saturated TEA-Esterquat. However, the water solubility was determined for the source substance partially unsaturated TEA-Esterquat. A justification for read-across is attached to Iuclid section 13.
The water solubility of partially unsaturated TEA-Esterquat was investigated in a study conducted according to OECD Guideline 105 and EU-Method A.6 and using HPLC/MS/MS for quantification. HPLC/MS/MS proved to be a suitable analytical tool. Based on the results of the preliminary test, the flask method was used for the determination of the water solubility. In the main test, on the one hand the test item was dissolved in distilled water and the water solubility was measured at 10, 20, and 30°C without adjustment of the pH and on the other hand the water solubility of the test item was determined in buffered systems (pH 4, 7, and 9) at 20°C. The following results were obtained:
1. Solubility in water without pH adjustment (distilled water being in equilibrium with atmospheric carbon dioxide) at 10, 20, and 30°C: 2171 (pH 3.73, 10°C), 2244 (pH 3.86, 20°C), and 2359 mg/L (pH 3.83, 30°C).The water solubility was not found to be temperature dependent.
2. Solubility in buffered water at pH 4-9 and 20°C: 5.30 (pH 4.05), 3.39 (pH 7.08), and 19.4 mg/L (pH 9.11; at 20°C each). Based on the results in buffered systems it can be assumed that the water solubility is dependent on pH.
Supporting data on the structurally related source substance MDEA-Esterquat C16-18 and C18 unsatd. are included to justify read-across: the water solubility of the source substance was estimated to be 17.6 mg/L at 19.7°C based on the results of turbidity measurements.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.