Registration Dossier

Administrative data

First-aid measures

General advice
Remove contaminated, soaked clothing immediately and dispose of safely. First aider needs to protect himself.

Inhalation
Keep at rest. Aerate with fresh air. When symptoms persist or in all cases of doubt seek medical advice.

Eyes
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Immediate medical attention is required.

Skin
Wash off immediately with soap and plenty of water. When symptoms persist or in all cases of doubt seek medical advice.

Ingestion
Call a physician immediately. Do not induce vomiting without medical advice.

Main symptoms
cough, headache, nausea, shortness of breath.

Special hazard
Lung irritation, Lung oedema.

Notes to physician
Treat symptomatically. If ingested, flush stomach and compensate acidosis.

Fire-fighting measures

Suitable extinguishing media
foam, dry chemical, carbon dioxide (CO2), water spray

Extinguishing media which must not be used for safety reasons
Do not use a solid water stream as it may scatter and spread fire.

Special exposure hazards arising from the substance or preparation itself, its combustion products, or released gases
Under conditions giving incomplete combustion, hazardous gases produced may consist of:
carbon monoxide (CO)
carbon dioxide (CO2)
Combustion gases of organic materials must in principle be graded as inhalation poisons
Vapour/air-mixtures are explosive at intense warming
Vapours are heavier than air and may spread along floors

Special protective equipment for fire-fighters
Fire fighter protection should include a self-contained breathing apparatus (NIOSH-approved or EN 133) and full fire-fighting turn out gear.

Precautions for fire-fighting
Cool containers / tanks with water spray. Water run-off and vapor cloud may be corrosive. Dike and collect water used to fight fire. Keep people away from and upwind of fire

Accidental release measures

Personal precautions
Avoid contact with skin and eyes. Avoid breathing vapors or mists. Keep people away from and upwind of spill/leak. Ensure adequate ventilation, especially in confined areas. Keep away from heat and sources of ignition.
For emergency responders: Personal protection see section 8.

Environmental precautions
Prevent further leakage or spillage. Do not discharge product into the aquatic environment without pretreatment (biological treatment plant).

Methods for containment
Stop the flow of material, if possible without risk. Dike spilled material, where this is possible.

Methods for cleaning up
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum. Dispose of in accordance with local regulations. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours)

Handling and storage

‘This substance is handled under Strictly Controlled Conditions in accordance with
REACH regulation Article 17(3) for on-site isolated intermediates and, in case the
substance is transported to other sites for further processing, the substance should
be handled at these sites under the Strictly Controlled Conditions as specified in
REACH regulation Article 18(4). Site documentation to support safe handling
arrangements including the selection of engineering, administrative and personal
protective equipment controls in accordance with risk-based management systems is
available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received
from every affected Distributor and Downstream Processor/User of the Registrant’s
intermediate.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

‘This substance is handled under Strictly Controlled Conditions in accordance with
REACH regulation Article 17(3) for on-site isolated intermediates and, in case the
substance is transported to other sites for further processing, the substance should
be handled at these sites under the Strictly Controlled Conditions as specified in
REACH regulation Article 18(4). Site documentation to support safe handling
arrangements including the selection of engineering, administrative and personal
protective equipment controls in accordance with risk-based management systems is
available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received
from every affected Distributor and Downstream Processor/User of the Registrant’s
intermediate.

Stability and reactivity

Stability
Stable under recommended storage conditions.

Conditions to avoid
Avoid contact with heat, sparks, open flame, and static discharge. Avoid any source of ignition.

Materials to avoid
bases, amines.

Hazardous decomposition products
No decomposition if stored and applied as directed.

Disposal considerations

Dispose of waste in accordance with all applicable laws and regulations.