Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 200-473-5 | CAS number: 60-35-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2014-08-01
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Data obtained from a guideline study according to OECD Guideline 439 and therefore considered reliable without restrictions.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 014
- Report date:
- 2014
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Acetamide
- EC Number:
- 200-473-5
- EC Name:
- Acetamide
- Cas Number:
- 60-35-5
- Molecular formula:
- C2H5NO
- IUPAC Name:
- acetamide
- Test material form:
- solid: crystalline
- Details on test material:
- Name Acetamid
Appearance colorless crystal substance
CAS No. 60-35-5
EINECS-No. 200-473-5
Molecular formula C2H5NO
Molecular weight 59.07 g/mol
Purity Pure substance > 99 %
Constituent 1
Test animals
- Species:
- other: in vitro
- Strain:
- other: in vitro
Test system
- Type of coverage:
- open
- Preparation of test site:
- other: not applicable
- Vehicle:
- unchanged (no vehicle)
- Controls:
- other: not applicable
- Amount / concentration applied:
- Tissue 1: 26.5 mg
Tissue 2: 27.3 mg
Tissue 3: 26.1 mg - Duration of treatment / exposure:
- 60 minutes
- Number of animals:
- 3 tissues
- Details on study design:
- Pre-Tests
First, it was tested whether the test item develops a colour without MTT addition. 24.7 mg were given in a test tube with 0.3 mL H2O demin. and incubated at 37 °C and 5% CO2 for 60 minutes. The resulting solution was colourless, therefore no binding capacity had to be tested.
Then, the test item Acetamid was tested for the ability of direct formazan reduction. To test for this ability, 24.3 mg were added to 1 mL of MTT solution and the mixture was incubated in the dark at 37 °C and 5 % CO2 for 60 minutes. Untreated MTT solution was used as control. The MTT solution didn’t change its colour within one hour, therefore, direct MTT reduction had not taken place, and no data correction was necessary.
Pre-Incubation of Tissues
Eight 6-well-plates were prepared with 0.9 mL assay medium in three of the six wells (up-per row). The tissues were inspected for viability. Viable tissues were transferred (three per plate) in the wells with the medium using sterile forceps under the clean bench and placed into the incubator at 37 °C and 5 % CO2 for one hour.
After the pre-incubation (one hour), the other three wells of each plate (lower row) were filled with fresh assay medium (0.9 mL). Every tissue was transferred into a well of the lower row. All 6-well-plates were set into the incubator at 37 °C and 5 % CO2 for 18 hours.
Treatment
The pre-incubated tissues were placed into fresh 6-well-plates containing 0.9 mL assay medium per well, using the upper row only.
One plate (three tissues) was used as negative control; each tissue was treated with 30 µL DPBS buffer. One plate was used as positive control; each tissue was treated with 30 µL SDS-solution. One plate was used for treatment with the test item. The tissues were wetted with 25 µL DPBS buffer before applying the test item and spreading it to match the tissue size.
Tissues were dosed in one minute intervals. After dosing the last tissue, all plates are transferred into the incubator for 35 min.. 60 min. after the first application, the inserts were removed from the plates using sterile forceps and rinsed immediately in one-minute-intervals.
Dosing of first tissue: 11:00 h
Dosing of last tissue: 11:23 h
Start of incubation at 37 °C: 11:25 h
End of incubation at 37 °C: 12:00 h
Rinsing of first tissue: 12:00 h
Rinsing of last tissue: 12:23 h
After rinsing, each tissue was dried with a sterile cotton tip and then transferred into a new 6-well-plate with fresh assay medium (0.9 mL). The tissue surfaces were evaluated visually under the stereo microscope, excess test item was removed, where necessary.
Then the tissues were set in the incubator for 24 hours.
Medium Renewal
For three incubated tissues, a new 6-well-plate with 0.9 mL assay medium in the upper row was prepared. The tissues were removed from the incubator and shaken for ten min (500 rpm). Then the inserts were transferred into the new 6-well-plate and set into the in-cubator for 18 ± 2 hours for post-incubation.
The medium from the “old” 6-well-plates was collected in the labelled 24-well-plate. It can be stored for 12 months at – 20 °C for possible interleukin analysis. As the result of the test was unambiguous, the samples will be destroyed after finalisation of the final report.
MTT Assay
After a total incubation time of 42 ± 2 hours, a 24-well-plate was prepared with 300 µL freshly prepared MTT-reagent in each well. The tissues were blotted on the bottom and then transferred into the 24-well-plate. Then the 24-well-plate was set into the incubator for 3 hours ± 5 min.
After this time, the MTT reagent was aspirated and replaced by DPBS buffer. This was then aspirated, too, and replaced several times.
At last, each insert was thoroughly dried and set into the empty, pre-warmed 24-well-plate. Into each well, 2 mL isopropanol were pipetted, taking care to reach the upper rim of the insert. The plate was then shaken for two hours at room temperature.
After two hours, the inserts in which formazan had been produced were pierced with an injection needle, taking care that all colour was extracted. The inserts were then discarded and the content of each well was thoroughly mixed in order to achieve homogenisation.
From each well, two replicates with 200 µL solution (each) were pipetted into a 96-well-plate which was read in a plate spectral photometer at 570 nm.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- other: other: % Formazan production
- Value:
- 104.9
- Remarks on result:
- other:
- Remarks:
- Basis: mean. Time point: 60 min. Max. score: 50.0. Reversibility: other: not applicable. (migrated information)
Any other information on results incl. tables
From the measured absorptions, the mean of each tissue was calculated, subtracting the mean absorption of isopropanol. Mean and relative standard deviation (comparison of the three tissues) were also calculated.
Mean Absorption Values
Designation |
Negative Control |
Acetamid |
Positive Control |
Mean – blank (Tissue 1) |
2.039 |
2.251 |
0.045 |
Mean – blank (Tissue 2) |
2.167 |
2.095 |
0.047 |
Mean – blank (Tissue 3) |
1.882 |
2.038 |
0.043 |
Mean of the three Tissues |
2.029 |
2.128 |
0.045 |
Relative Standard Deviation |
7.0% |
5.2% |
4.4% |
For the test item and the positive control, the following percentage values of formazan production were calculated in comparison to the negative control:
% Formazan Production
Designation |
Acetamid |
Positive Control |
% Formazan production (Tissue 1) |
110.9% |
2.2% |
% Formazan production (Tissue 2) |
103.3% |
2.3% |
% Formazan production (Tissue 3) |
100.4% |
2.1% |
% Formazan production Mean |
104.9% |
2.2% |
Applicant's summary and conclusion
- Interpretation of results:
- not irritating
- Remarks:
- Migrated information Criteria used for interpretation of results: EU
- Conclusions:
- The skin Irritation Potential of Acetamid was determined in the Human Skin Model Test following EU-Method B.46 resp. OECD 439.
Three tissues of the human skin model EpiDermTM were treated with Acetamid for 60 minutes.After the treatment with the test item, the relative absorbance values increased compared to the negative control to 104.9 %. This value is well above the threshold for irritation po-tential (50 %).
Therefore, Acetamid is considered as not skin irritant in the Human Skin Model Test. - Executive summary:
The skin Irritation Potential of Acetamid was determined in the Human Skin Model Test following EU-Method B.46 resp. OECD 439.
Three tissues of the human skin model EpiDermTMwere treated withAcetamidfor 60 minutes.
In average, 26.6 mg of the solid test item (wetted with 25 µL DPBS-buffer) were applied to each tissue and spread to match the tissue size (0.63 cm2; as indicated by supplier).
DPBS-buffer was used as negative control, 5 % SDS-solution was used as positive control.
After treatment with the negative control, the absorbance values were within the required acceptability criterion of 0.8 ≤ mean OD ≤ 2.8. The positive control showed clear irritating effects. Variation within tissues was acceptable (< 18%).
After the treatment with the test item, the relative absorbance values increased compared to the negative control to 104.9 %. This value is well above the threshold for irritation potential (50 %).
Therefore, Acetamid is considered as not skin irritant in the Human Skin Model Test.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.