Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information:
Change soaked clothing.

After inhalation:
When inhaled remove to fresh air and seek medical aid.

After contact with skin:
In case of contact with skin wash off immediately with plenty of water.

After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.

After ingestion:
Summon a doctor immediately.

Indication of any immediate medical attention and special treatment needed:
Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media:
foam
water spray jet
carbon dioxide
dry powder

Special hazards arising from the substance or mixture:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO) Carbon dioxide (CO2).

Advice for firefighters
Special protective equipment for firefighting:
Use self-contained breathing apparatus.

Further information:
Apply foam in large quantities because some of it will be destroyed by the product.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear suitable personal protective equipment.

Environmental precautions:
Do not allow to enter drains or waterways.

Methods and material for containment and cleaning up:
Take up with absorbent material (eg sand, kieselguhr, universal binder).

Handling and storage

Advice on safe handling:
Ensure adequate ventilation.

Hygiene measures:
Keep away from foodstuffs and beverages.

Advice on protection against fire and explosion:
Containers in danger should be cooled with water.

Further information on storage conditions:
Do not leave vessels/containers open.
Prevent entry of air/oxygen (peroxide formation).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:
Avoid contact with eyes and skin.

Respiratory protection:
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure.
Full mask to standard DIN EN 136.
Filter A (organic gases and vapours) to standard DIN EN 141.
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.

Hand protection:
For long-term exposure:
Butyl rubber gloves.
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 10 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection:
Safety glasses

Stability and reactivity

Chemical stability:
Under normal conditions the product is stable.

Possibility of hazardous reactions:
When handled and stored appropriately no dangerous reactions are known.

Incompatible materials:
not known

Hazardous decomposition products:
When handled and stored appropriately, no dangerous decomposition products are known.

Disposal considerations

Waste treatment methods:
Product: Incineration in suitable incineration plant, observing local authority regulations
Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste