Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 208-235-2 | CAS number: 517-23-7
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.5 (Surface Tension)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- OECD Guideline 115 (Surface Tension of Aqueous Solutions)
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- ring method
- Surface tension:
- 70.7 mN/m
- Temp.:
- 20 °C
- Conc.:
- 0.99 g/L
- Conclusions:
- The surface tension of the test substance was determined to be 70.7 mN/m at 20+/- 0.5 °C.
- Executive summary:
The surface tension of an aqueous solution of the test item was determined according to the European Commission Council Regulation (EC) No. 440/2008, Annex, Part A, A.5. and OECD Test Guideline 115, ring method.
Due to the high solubility of the test item in distilled water of 320 g/L, a solution with a nominal concentration of 1 g/L of the test item in distilled water was applied to this test. For preparation of this test solution 198.18 mg of the test item were dissolved in 200 mL of distilled water. The concentration of this solution was determined by HPLC-MS to be 0.99 g/L.
After filling the solution into the vessel of the tensiometer and tempering it to the test temperature, the measuring procedure was started and repeated until the value of surface tension remained nearly constant.
The surface tension of the test substance was determined to be 70.7 mN/m at 20+/- 0.5 °C.
Reference
Description of key information
The surface tension of an aqueous solution of the test item was determined according to the European Commission Council Regulation (EC) No. 440/2008, Annex, Part A, A.5. and OECD Test Guideline 115, ring method.
Due to the high solubility of the test item in distilled water of 320 g/L, a solution with a nominal concentration of 1 g/L of the test item in distilled water was applied to this test. For preparation of this test solution 198.18 mg of the test item were dissolved in 200 mL of distilled water. The concentration of this solution was determined by HPLC-MS to be 0.99 g/L.
After filling the solution into the vessel of the tensiometer and tempering it to the test temperature, the measuring procedure was started and repeated until the value of surface tension remained nearly constant.
The surface tension of the test substance was determined to be 70.7 mN/m at 20+/- 0.5 °C.
Key value for chemical safety assessment
- Surface tension:
- 70.7
- in mN/m at 20°C and concentration in mg/L:
- 0.99
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
