Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Consult a doctor. Show this safety data sheet.
If inhaled: If inhaled, remove person from contaminated area. If no breath give artificial respiration. See a doctor.
In case of skin contact: Wash with soap and plenty of water. See a doctor.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes. See a doctor.
If swallowed: Never give anything by mouth to an unconscious person. Rinse your mouth with water
  See a doctor. Do not induce vomiting.

Fire-fighting measures

Use water spray, alcohol-resistant foam, dry powder or carbon dioxide

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use individual protective gear. Avoid breathing vapors, spray mists or gases. Ensure
adequate ventilation.

Precautions for the protection of the environment
Do not let product enter drains.

Methods and material for containment and cleaning
Soak with an inert absorbent material and dispose of as a special waste. Store in suitable and closed containers for
disposal.

Handling and storage

Precautions for safe handling:
Avoid contact with skin and eyes. Avoid breathing vapor or mist.

Usual preventive measures for fire protection.

Conditions for safe storage, including any incompatibilities:
Store in a cool place. Keep container tightly closed in a dry and well-ventilated place at a temperature between 0 and 30 ° C.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection: Under normal conditions of use, respiratory protection is not necessary.
Avoid inhalation of vapors, mists and sprays. 
If there is a risk of thermal degradation products, use a full face respirator.
Select one of the following approved respiratory equipment, taking into account the concentration of contaminants in the atmosphere and in accordance with the regulations force: half-mask respirator or complete mask with air purification with cartridges for organic vapors.

Hand protection: Avoid skin contact with hot material.
 Wear suitable gloves, eg NOMEX, by handling this product to avoid burns by heat. 
A pair of gloves made of the following material (s) is recommended: rubber nitrile.

Eye protection: Avoid contact with eyes. To avoid contact with the eyes, the following equipment must be worn, alone or in combination, depending on the case: wear safety glasses with side protection.

Skin and body protection: Avoid contact with skin.

Ingestion: Do not eat, drink or smoke using the product. Wash exposed areas thoroughly with soap and water.

Recommended Ventilation: Provide appropriate local ventilation when product is heated.
  Provide appropriate extractive ventilation on open containers.
  If the product may be subject to extreme temperatures due to improper use or
  equipment failure, use appropriate local extraction to maintain the
  rate of decomposition products below the exposure limit values.
  Use general ventilation and / or local exhaust ventilation to maintain
  exposure to air below the exposure limit values.
  If ventilation is not appropriate, use respiratory protection.

Stability and reactivity

Reactivity
No predictable.

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
No predictable.

Conditions to avoid
Do not overheat.

Incompatible materials
Active metals finely divided
Alkaline and alkaline earth metals
Strong oxidizers
Powdered metal salts.

Hazardous decomposition products
Hydrogen fluoride at high temperatures
Perfluoroisobutylene (PFIB) at high temperatures
Carbon monoxide
Carbon monoxide

Disposal considerations

Waste treatment methods
Product as is: Mix with flammable material and incinerate in a suitable industrial facility. The products of
combustion will contain HF.

Wastes resulting from use: Collection and incineration by specialized companies

Contaminated packaging: Collection and incineration by specialized companies

Possible waste nomenclature: 140602 *

Possibility of recycling: Recover if possible