Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 411-760-1 | CAS number: 116633-53-5 COMMERCIAL DRAGON II
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove from source of dust to fresh air and obtain medical
attention if symptoms develop.
Emergency measure - Eyes: Wash well with water and obtain medical attention if any
symptoms persist.
Emergency measure - Skin: Wash thoroughly with water and obtain medical attention if
symptoms develop.
Emergency measure - Ingestion: Remove material from mouth. Drink 1 or 2 glasses of water
(or milk). If large amounts swallowed or symptoms develop
obtain medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water, foam, dry powder or carbon dioxide
Product arising from burning: The substance is combustible and will burn if involved in a
fire, probably evolving noxious fumes (eg. carbon and
nitrogen oxides with a slight possibility of hydrogen
fluoride being formed). However, there is no experimental
evidence to support the presence of the anticipated
combustion products, which are based on theoretical
consideration of the elements present in the compound.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Vacuum clean or moisten and sweep up and put in container
for subsequent disposal.
Contain spills of solutions with sand or earth and dispose
of according to local regulations.
Wash away residue or small spillage with low pressure water.
Handling and storage
Handling: The substance should be handled and used under conditions of
good industrial hygiene and in conformity with any local
regulations in order to avoid exposure, particularly by skin
contact inhalation of dust and ingestion.
A provisional inhalation exposure limit of 1mg/m3 has been
recommended as a maximum for a four-hour time weighted
average concentration.
When exposure cannot be prevented, other than by the use of
personal protective equipment - eye protection (goggles to
B.S 2092-2), impervious gloves (PVC, nitrile) and protective
clothing (cotton overalls) should be worn.
When respiratory protective equipment has to be used, it
must be capable of adequately controlling exposure and be
suitable for the purpose. A dust mask conforming to BS 6016
Type -2 is recommended.
Storage: The substance should be stored in sealed containers at room
temperature. Containers can either be of plastic or
polythene-lined fibre/steel drums.
This substance should be stored away from strong oxidising
agents and strong alkalis.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None available
Transport: Should be transported in sealed polythene-lined 50 litre
steel drums.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None
Chemical reaction with water: None
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Vacuum clean or moisten and sweep up and put in appropriate
container for subsequent disposal.
Industry - Possibility of neutralisation: The major hazard associated with spillage of this material
is inhalation of dust. This hazard can be sufficiently
reduced by damping down the product prior to sweeping it up
for disposal. After physical removal of small amounts, any
residual product can be swilled away with copious amounts of
water.
The Base Set tests have shown that the substance is harmful
by prolonged exposure. Adequate protection should be worn
during normal handling and when dealing with spillages to
ensure hazards are minimised (see Section A2.3.1).
No chemical neutralization of this compound is required.
Industry - Possibility of destruction: controlled discharge: After physical removal for subsequent disposal flush the
residue away with copious amounts of low pressure water.
Industry - Possibility of destruction - incineration: As an organic material Commercial Dragon II will combust,
however it would be preferable to collect solid residues and
return to the manufacturer for possible recovery/disposal.
Industry - Possibility of destruction - water purification: The substance is not readily biodegradable; to reduce the
impact on a system, prior-dilution is advised.
Industry - Possibility of destruction - other: Land fill (B.650)
Public at large - Possibility of recovery/recycling: In the case of spillage, the substance can be recovered for
recyling or possible disposal by moistening with water prior
to sweeping up and placing in a sealable container (plastic
liner inside a fibre or steel drum). The use of a vacuum
cleaner to suck up dry material may also be used. However
the substance in its pure (i.e. conformulated) state will
not be made available to the public.
Public at large - Possibility of neutralisation: The major hazard associated with spillage of this material
is inhalation of dust. Dustiness of product can be
significantly reduced/eliminated by damping the product with
water. Following physical recovery of the product as
described in Section 6.2.1, small amounts of residual
product can safely be disposed of by flushing away with
copious amounts of water.
No chemical neutralisation of this compound is required.
Public at large - Possibility of destruction: controlled discharge: Since the product is a solid, it is a relatively simple job
to contain it and sweep up into containers for recovery.
After physical removal, any small amounts of residual solid
may be flushed away with copious amounts of water.
Public at large - Possibility of destruction - incineration: As an organic solid it will burn, but it is preferable to
return all solid residues to the manufacturer for possible
recovery/disposal.
Public at large - Possibility of destruction - water purification: All solid residues should be recovered and therefore the
effects of swilling away small amounts of product will be
minimised. Copious amounts of water should always be used.
Public at large - Possibility of destruction - others: Land Fill may be used for this product, but again it is
preferable to collect all solid residues for return to the
manufacturer for recovery/disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.