Reaction products of 4,4'-methylenebis(2,6-dimethylaniline) and 4-aminobenzenesulfonic acid with 2,4,6-trichloro-1,3,5-triazine, diazotised and subsequently coupled with N-(2-methoxyphenyl)-3-oxobutanamide

Guidance on Safe Use

First-aid measures

- Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.

- Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek immediate medical attention in case there is breathing difficulty.

- Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

- Ingestion: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Do not induce vomiting. Get medical attention. If necessary, call a poison center or physician. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

- Information to doctor: No specific instructions. Symptomatic treatment.

Fire-fighting measures

Suitable extinguishing media: Use dry chemical powder, water spray, carbon dioxide or foam.

Decomposition products may include carbon monoxide.

Special precautions for fire-fighters: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents.

Accidental release measures

Personal precautions

- For non-emergency personnel: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing dust. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

- For emergency responders: If specialised clothing is required to deal with the spillage, take note of any information in Section "Exposure controls/personal protection" on suitable and unsuitable materials. See also the information in "For non-emergency personnel".

Environmental precautions

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

- Small spill: Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.

- Large spill: Move containers from spill area. Approach the release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labelled waste container. Avoid creating dusty conditions and prevent wind dispersal. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Note: see section ''Disposal Considerations'' for waste disposal.

Handling and storage

Precautions for safe handling

- Protective measures: Put on appropriate personal protective equipment (see Section "Exposure controls/personal protection"). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Prevent dust accumulation. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Electrical equipment and lighting should be protected to appropriate standards to prevent dust coming into contact with hot surfaces, sparks or other ignition sources. Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by earthing and bonding containers and equipment before transferring material. Empty containers retain product residue and can be hazardous. Do not reuse container.

- Advice on general occupational hygiene: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section "Exposure controls/personal protection" for additional information on hygiene measures.

Conditions for safe storage, including any incompatibilities:

Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section "Stability and reactivity") and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

Reaction products of 4,4'-methylenebis(2,6-dimethylaniline) and 4-aminobenzenesulfonic acid with 2,4,6-trichloro-1,3,5-triazine, diazotised and subsequently coupled with N-(2-methoxyphenyl)-3-oxobutanamide

Language:

English

Labels:

9

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

Reaction products of 4,4'-methylenebis(2,6-dimethylaniline) and 4-aminobenzenesulfonic acid with 2,4,6-trichloro-1,3,5-triazine, diazotised and subsequently coupled with N-(2-methoxyphenyl)-3-oxobutanamide

Language:

English

Labels:

9

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

Reaction products of 4,4'-methylenebis(2,6-dimethylaniline) and 4-aminobenzenesulfonic acid with 2,4,6-trichloro-1,3,5-triazine, diazotised and subsequently coupled with N-(2-methoxyphenyl)-3-oxobutanamide

Labels:

9

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

UN3082

Shipping information

Proper shipping name and description:

Environmentally hazardous substance, liquid, n.o.s.

Chemical name:

Reaction products of 4,4'-methylenebis(2,6-dimethylaniline) and 4-aminobenzenesulfonic acid with 2,4,6-trichloro-1,3,5-triazine, diazotised and subsequently coupled with N-(2-methoxyphenyl)-3-oxobutanamide

Labels:

9

Remarks

SpecialProvisions

Exposure controls / personal protection

Appropriate engineering controls

Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Hygiene measures

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Individual Protective Equipment:

- Eye/face protection: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If operating conditions cause high dust concentrations to be produced, use dust goggles.

- Hand protection: Suitability and durability of a glove is dependent on usage. Always seek advice from glove suppliers.

- Body protection and other skin protection: Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist.

- Respiratory protection: In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Environmental exposure controls

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

- Reactivity: No specific test data related to reactivity available for this substance

- Chemical stability: The product is stable at ambinent temperature

- Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

- Conditions to avoid: Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by earthing and bonding containers and equipment before transferring material. Prevent dust accumulation.

- Incompatible materials: Contact with strong acids, strong bases and strong oxidising agents should be avoided.

- Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

Waste treatment methods

Product:

- Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Significant quantities of waste product residues should not be disposed of via the foul sewer but processed in a suitable effluent treatment plant. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

Packaging:

- Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.

- Special precautions: This substance and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.