Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 605-404-6 | CAS number: 16535-55-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water: screening tests
Administrative data
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2019
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2019
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
- Version / remarks:
- Adopted July 17, 1992
- Deviations:
- yes
- Remarks:
- On nominal day 27 the aeration of blank bottle B was broken down due to a clogged air filter. Aeration was restored by replacing the filter. Evaluation: Such a short (<1 day) breakdown in aeration has no influence on the outcome of the test.
- Qualifier:
- according to guideline
- Guideline:
- other: ISO International Standard 10634. "Water Quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium"
- Version / remarks:
- 1995
- Deviations:
- yes
- Remarks:
- On nominal day 27 the aeration of blank bottle B was broken down due to a clogged air filter. Aeration was restored by replacing the filter. Evaluation: Such a short (<1 day) breakdown in aeration has no influence on the outcome of the test.
- GLP compliance:
- yes
Test material
- Reference substance name:
- (2,4-dioxo-1,3-benzoxazin-7-yl) ethyl carbonate
- EC Number:
- 605-404-6
- Cas Number:
- 16535-55-0
- Molecular formula:
- C11 H9 N O6
- IUPAC Name:
- (2,4-dioxo-1,3-benzoxazin-7-yl) ethyl carbonate
- Test material form:
- solid: particulate/powder
- Details on test material:
- Off-white crystalline powder
Constituent 1
Study design
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- sewage, predominantly domestic, adapted
- Details on inoculum:
- - Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure): freshly obtained from a municipal sewage treatment plant: 'Waterschap Aa en Maas', 's-Hertogenbosch, The Netherlands
- Laboratory culture: /
- Method of cultivation: The freshly obtained sludge was used immediately.
- Storage conditions: /
- Storage length: /
- Preparation of inoculum for exposure: /
- Pretreatment: The day before the start of the test (day -1) mineral components, Milli-RO water (ca. 80% of final volume) and inoculum (1% of final volume) were added to each bottle. This mixture was aerated with synthetic air overnight to purge the system of CO2.
- Concentration of sludge: The concentration of suspended solids was determined to be 3.6 g/L in the concentrated sludge.
- Initial cell/biomass concentration: /
- Water filtered: yes
- Type and size of filter used, if any: Tap-water purified by reverse osmosis (Milli-RO) and subsequently passed over activated carbon. - Duration of test (contact time):
- 28 d
Initial test substance concentrationopen allclose all
- Initial conc.:
- 46.63 mg/L
- Based on:
- test mat.
- Remarks:
- Test bottle A
- Initial conc.:
- 46.68 mg/L
- Based on:
- test mat.
- Remarks:
- test bottle B
Parameter followed for biodegradation estimation
- Parameter followed for biodegradation estimation:
- CO2 evolution
- Details on study design:
- TEST CONDITIONS
- Composition of medium: 1 litre mineral medium contains: 10 mL of solution (A), 1 mL of solutions (B) to (D) and Milli-RO water.
A) 8.50 g KH2PO4
21.75 g K2HPO4
67.20 g Na2HPO4.12H2O
0.50 g NH4Cl
dissolved in Milli-RO water and made up to 1 litre, pH 7.4 ± 0.2
B)22.50 g MgSO4.7H2O dissolved in Milli-RO water and made up to 1 litre.
C)36.40 g CaCl2.2H2O dissolved in Milli-RO water and made up to 1 litre.
D)0.25 g FeCl3.6H2O dissolved in Milli-RO water and made up to 1 litre.
- Additional substrate: /
- Solubilising agent (type and concentration if used): /
- Test temperature: between 22.2 and 23.3°C.
- pH: 7.6-7.8
- pH adjusted: no
- CEC (meq/100 g): /
- Aeration of dilution water: A mixture of oxygen (ca. 20%) and nitrogen (ca. 80%) was passed through a bottle, containing 0.5 - 1 litre 0.0125 M Ba(OH)2 solution to trap CO2 which might be present in small amounts. The synthetic air was sparged through the scrubbing solutions at a rate of approximately 1-2 bubbles per second (ca. 30-100 mL/min).
- Suspended solids concentration: 3.6 g/L
- Continuous darkness: yes
- Other: /
TEST SYSTEM
- Culturing apparatus: /
- Number of culture flasks/concentration:
Test suspension: containing test item and inoculum (2 bottles).
Inoculum blank: containing only inoculum (2 bottles)
Positive control: containing reference item and inoculum (1 bottle).
Toxicity control: containing test item, reference item and inoculum (1 bottle).
- Method used to create aerobic conditions: A mixture of oxygen (ca. 20%) and nitrogen (ca. 80%) was passed through a bottle, containing 0.5 - 1 litre 0.0125 M Ba(OH)2 solution to trap CO2 which might be present in small amounts. The synthetic air was sparged through the scrubbing solutions at a rate of approximately 1-2 bubbles per second (ca. 30-100 mL/min).
- Method used to create anaerobic conditions: /
- Measuring equipment: The CO2 produced in each test bottle reacted with the barium hydroxide in the gas scrubbing bottle and precipitated out as barium carbonate. The amount of CO2 produced was determined by titrating the remaining Ba(OH)2 with 0.05 M standardized HCl (1:20 dilution from 1 M HCl (Titrisol® ampoule), Merck, Darmstadt, Germany).
- Test performed in closed vessels due to significant volatility of test substance: /
- Test performed in open system: /
- Details of trap for CO2 and volatile organics if used: At the start of the test (day 0), test and reference item were added to the bottles containing the microbial organisms and mineral components. The volumes of suspensions were made up to 2 litres with Milli-RO water, resulting in the mineral medium described before.
Three CO2-absorbers (bottles filled with 100 mL 0.0125 M Ba(OH)2) were connected in series to the exit air line of each test bottle.
- Other: /
SAMPLING
- Sampling frequency: Titrations were made every second or third day during the first 10 days, and thereafter at least every fifth day until day 28, for the inoculum blank and test item. Titrations for the positive and toxicity control were made over a period of at least 14 days.
- Sampling method: Each time the CO2-absorber nearest to the test bottle was removed for titration; each of the remaining two absorbers were moved one position in the direction of the test bottle. A new CO2-absorber was placed at the far end of the series. Phenolphthalein (1% solution in ethanol, Merck) was used as pH-indicator. On the penultimate day, the pH of all test media was measured and 1 mL of concentrated HCl (37%, Merck) was added to the test bottles. Bottles were aerated overnight to drive off CO2 present in the test suspension. Final titration was made on day 15 (procedure and toxicity control) and on day 29 (remaining vessels).
- Sterility check if applicable: /
- Sample storage before analysis: /
- Other: /
CONTROL AND BLANK SYSTEM
- Inoculum blank: containing only inoculum (2 bottles)
- Abiotic sterile control: /
- Toxicity control: containing test item, reference item and inoculum (1 bottle).
- Other: Positive control: containing reference item and inoculum (1 bottle).
STATISTICAL METHODS:
Reference substance
- Reference substance:
- acetic acid, sodium salt
- Remarks:
- final concentration of 40 mg sodium acetate per litre (12 mg TOC/L)
Results and discussion
- Test performance:
- In the toxicity control, more than 25% biodegradation occurred within 14 days (73%, based on ThCO2). Therefore, the test item was assumed not to inhibit microbial activity.
Functioning of the test system was checked by testing the reference item sodium acetate (i.e. procedure control), which showed a normal biodegradation curve
% Degradationopen allclose all
- Parameter:
- % degradation (CO2 evolution)
- Remarks:
- Bottle A
- Value:
- 84
- Sampling time:
- 28 d
- Parameter:
- % degradation (CO2 evolution)
- Remarks:
- Bottle B
- Value:
- 96
- Sampling time:
- 28 d
- Details on results:
- Relative biodegradation values calculated from measurements performed during the test period revealed 84% and 96% biodegradation of CH02672, for vessel A and B, respectively (based on ThCO2).
However, average biodegradation of CH02672 in vessel A and B did not reach ≥60% within a 10-day window. Thus, the criterion for ready biodegradability was not met.
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Interpretation of results:
- inherently biodegradable
- Conclusions:
- In conclusion, CH02672 was not readily biodegradable under the conditions of the modified Sturm test presently performed. Since results of the present test indicate that the pass level criterion was fulfilled but the 10-day window criterion was not fulfilled, the present test can be used to indicate inherent biodegradability.1
- Executive summary:
The objective of the study was to evaluate test item CH02672 for its ready biodegradability in an aerobic aqueous medium with microbial activity introduced by inoculation with activated sludge.
Procedures described in this report were in compliance with OECD guideline No. 301 B, 1992. In addition, procedures were designed to meet test methods of ISO standard 10634, 1995.
CH02672 was an off-white crystalline powder with a purity of >99.9% (HPLC). The test item was tested in duplicate at a target concentration of 23 mg/L, corresponding to 12 mg TOC/L. Organic carbon content was based on the molecular formula. Theoretical CO2production (ThCO2) of CH02672 was calculated to be 1.93 mg CO2/mg.
The study consisted of six bottles:
-
2 inoculum blanks (no test item),
-
2 test bottles (CH02672),
-
1 procedure control (sodium acetate) and
- 1 toxicity control (CH02672 plus sodium acetate).
Since CH02672 was not sufficiently soluble to allow preparation of an aqueous solution at a concentration of 1 g/L, weighed amounts were added to 2 litre test bottles containing medium with microbial organisms and mineral components. To this end, 10 mL of Milli-RO water was added to each weighing bottle containing test item. After vigorous mixing (vortex) the resulting suspension was added quantitatively to the test medium. Test solutions were continuously stirred during the test to ensure optimal contact between test item and test organisms. Test duration was 28 days for inoculum blank and test item (last CO2measurement on day 29) and 14 days for procedure and toxicity control (last CO2 measurement on day 15). Relative biodegradation values calculated from measurements performed during the test period (28 days) revealed 84% and 96% biodegradation of CH02672, for vessel A and B, respectively (based on ThCO2). However, biodegradation did not exceed 60% within 10 days of achieving 10%. In the toxicity control, CH02672 was found not to inhibit microbial activity. Since all criteria for acceptability of the test were met, this study was considered to be valid. In conclusion, CH02672 was not readily biodegradable under the conditions of the modified Sturm test presently performed. Since results of the present test indicate that the pass level criterion was fulfilled but the 10-day window criterion was not fulfilled, the present test can be used to indicate inherent biodegradability.
-
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)