Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 607-708-4 | CAS number: 25359-91-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 08 January 2018 to 02 February 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 431 (In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method)
- Version / remarks:
- 2016
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: EC Guideline No. 440/2008. Part B: Methods for the Determination of Toxicity and other health effects, Guideline B.40 BIS: "In Vitro Skin Corrosion: Human Skin Model Test".
- Version / remarks:
- 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- 1-Naphthol, reaction products with formaldehyde
- EC Number:
- 607-708-4
- Cas Number:
- 25359-91-5
- Molecular formula:
- Not applicable - UVCB substance
- IUPAC Name:
- 1-Naphthol, reaction products with formaldehyde
- Test material form:
- liquid
- Details on test material:
- - Appearance: Blue liquid
- Storage: At room temperature container flushed with nitrogen.
Constituent 1
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Justification for test system used:
- Recommended test system in international guidelines.
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDerm Skin Model (EPI-200)
- Lot no.: 27912 Kit E and Kit F.
- Source: MatTek Corporation, Ashland MA, U.S.A.
- The model consists of normal, human-derived epidermal keratinocytes which have been cultured to form a multilayered, highly differentiated model of the human epidermis. It consists of organised basal, spinous and granular layers, and a multi-layered stratum corneum containing intercellular lamellar lipid layers arranged in patterns analogous to those found in vivo. The EpiDerm tissues (surface 0.6 cm²) were cultured on polycarbonate membranes of 10 mm cell culture inserts.
TEST FOR COLOUR INTERFERENCE BY THE TEST MATERIAL
The test material was checked for possible colour interference before the study was started. Some non-coloured test materials may change into coloured materials in aqueous conditions and thus stain the skin tissues during the 1-hour exposure. To assess the colour interference, 50 μL of the test material or 50 μL Milli-Q water as a negative control were added to 0.3 mL Milli-Q water. The mixture was incubated for approximately 1 hour at 37.0 ± 1.0 °C in the dark. At the end of the exposure time the mixture was shaken and it was checked if a blue / purple colour change was observed.
TEST FOR REDUCTION OF MTT BY THE TEST MATERIAL
The test material was checked for possible direct MTT reduction before the study was started. To assess the ability of the test material to reduce MTT, 50 μL of the test material or 50 μL Milli-Q water as a negative control were added to 1 mL MTT solution (1 mg/mL) in phosphate buffered saline. The mixture was incubated for approximately 1 hour at 37.0 ± 1.0 °C. At the end of the exposure time it was checked if a blue / purple colour change or a blue / purple precipitate was observed.
TEST SYSTEM SET-UP
- Tissues: On the day of receipt the tissues were kept on agarose and stored in the refrigerator. On the next day, at least one hour before starting the assay the tissues were transferred to 6-well plates with 0.9 mL DMEM.
- Freeze-killed tissues (EPI-200, Lot no.: 27636 Kit L and 27161 Kit J): Living epidermis was transferred to a freezer (≤-15 °C), thawed, and then again transferred to (≤-15 °C). The freeze-killed epidermis was stored at ≤ -15 °C until use. Freeze-killed tissues were thawed by placing them for 1 hour at room temperature in a 6 well plate on 0.9 mL DMEM. Further use of killed tissues was similar to living tissues.
APPLICATION AND TREATMENT
The skin tissues were kept in the refrigerator the day they were received. The next day, at least 1 hour before the assay was started the tissues were transferred to 6-well plates containing 0.9 mL DMEM per well. The level of the DMEM was just beneath the tissue. The plates were incubated for approximately 2.5 hours at 37.0 ± 1.0 °C. The medium was replaced with fresh DMEM just before the test material was applied. The test was performed on a total of 4 tissues per test material together with a negative control and positive control. Two tissues were used for a 3-minute exposure to the test material and two for a 1-hour exposure. Fifty μL of the undiluted test material was added into the 6-well plates on top of the skin tissues.
In addition, since the test material induced colour interference in aqueous conditions, two tissues were treated with test material for 3 minutes and two tissues for 1-hour. Instead of MTT solution these tissues were incubated with DMEM. In addition, since the test material reacted with the MTT medium, two freeze-killed tissues were treated with test material and two freeze-killed non treated tissues were used per exposure time for the cytotoxicity evaluation with MTT.
Furthermore, since the test material was identified as MTT reducer and caused colour interference, a third set of adapted controls was required. In this control, the test material was applied to two killed tissue replicates per exposure time which underwent the entire testing procedure but were incubated with assay medium instead of MTT solution during the MTT assay.
For the negative and positive controls, 2 tissues were treated with 50 μL Milli-Q water (negative control) and 2 tissues were treated with 50 μL 8N KOH (positive control) for both the 3-minute and 1-hour time point.
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 3 minutes at room temperature, 1 hour at 37 °C
- Temperature of post-treatment incubation: 37 °C with MTT
REMOVAL OF TEST MATERIAL AND CONTROLS
- After the exposure period, the tissues were washed with phosphate buffered saline to remove residual test material. The skin inserts were carefully dried. Rinsed tissues were kept in 24 well plates on 300 μL DMEM until 6 tissues (= one application time) were dosed and rinsed.
CELL VIABILITY MEASUREMENT
- The DMEM was replaced by 300 μL MTT-medium and tissues were incubated for 3 hours at 37 °C in air containing 5 % CO2. After incubation the tissues were washed with PBS and formazan was extracted with 2 mL isopropanol over night at room temperature. The amount of extracted formazan was determined spectrophotometrically at 570 nm in triplicate with the TECAN Infinite® M200 Pro Plate Reader.
NUMBER OF REPLICATE TISSUES: 2
ACCEPTABILITY CRITERIA
The in vitro skin corrosion test is considered acceptable if it meets the following criteria:
- The absolute mean OD570 of the two tissues of the negative control should reasonably be within the laboratory historical control data range.
- The mean relative tissue viability following 1-hour exposure to the positive control should be <15 %.
- In the range 20 – 100 % viability, the Coefficient of Variation (CV) between tissue replicates should be ≤ 30 %.
- The %NSC should be ≤ 30% relative to the negative control OD.
- The non-specific MTT reduction should be ≤ 30 % relative to the negative control OD.
INTERPRETATION
A test material is considered corrosive in the in vitro skin corrosion test if:
- The relative mean tissue viability obtained after 3-minute treatment compared to the negative control tissues is decreased below 50 %.
- In addition, a test material considered non-corrosive (viability ≥ 50 %) after the 3-minute treatment is considered corrosive if the relative tissue viability after 1-hour treatment with the test material is decreased below 15 %.
A test material is considered non corrosive in the in vitro skin corrosion test if:
- The relative mean tissue viability obtained after the 3-minute treatment compared to the negative control tissues is not decreased below 50 %.
- In addition, the relative tissue viability after the 1-hour treatment is not decreased below 15 %.
Step 1:
< 50 % after 3 minute exposure = corrosive
≥ 50 % after 3 minute exposure AND < 15 % after 1 hour exposure = corrosive
≥ 50 % after 3 minute exposure AND ≥ 15 % after 1 hour exposure = Non-corrosive
Step 2 (for substances/mixtures identified as Corrosive in step 1):
< 25 % after 3 minute exposure = Optional Sub-category 1A
≥ 25 % after 3 minute exposure = A combination of optional Sub-categories 1B and 1C
ANALYSIS
Calculation of Cell Viability
Optical Density readings were transferred into Microsoft Excel to allow further calculations to be performed.
The corrected OD (ODc) for each sample or control was calculated by subtracting the value of the blank mean (ODbl) from each reading (ODraw).
ODc = ODraw – ODbl
The OD value representing 100 % cell viability is the average OD of the negative controls (ODlt_u+MTT).
The % Viability for each sample and positive control is calculated as follows:
%Viability = (ODc/mean ODlt_u+MTT) * 100
Colouring Test Materials
Nonspecific colour in living tissues (NSCliving) was calculated. NSCliving is the mean OD of the treated living tissues without MTT reagent (ODlt_t-MTT) expressed as percentage of the mean of the negative control tissues (ODlt_u+MTT).
%NSCliving = [ODlt_t-MTT / ODlt_u+MTT] * 100
True tissue viability is calculated as the difference between the OD obtained with the test material treated living tissues incubated with MTT medium (ODlt_t+MTT) and the OD obtained with the test material treated living tissues incubated with medium without MTT (ODlt_t-MTT), and subsequently divided by the OD of the negative control (ODlt_u+MTT).
OD = ODlt_t+MTT – ODlt-t-MTT
% Viability = (OD / mean ODlt_u+MTT) * 100.
Since the %NSCliving ≤ 0.0, there is no need to correct for colour interference of the test material.
MTT Interacting Test Materials
Nonspecific MTT reduction (NSMTT) was calculated. NSMTT is the difference between the mean OD of the untreated freeze-killed tissues (ODkt_u+MTT) and test material treated freeze-killed tissues (ODkt_t+MTT) expressed as percentage of the mean of the negative control tissues (ODlt_u+MTT).
%NSMTT = [(ODkt_t+MTT – ODkt_u+MTT)/ mean ODlt_u+MTT] * 100
True tissue viability is calculated as the difference between the living test material treated tissues
incubated with MTT medium (ODlt_t+MTT) and the difference between ODkt_t+MTT and ODkt_u+MTT.
OD= [ODlt_t+MTT – (ODkt_t+MTT-ODkt_u+MTT)]
%Viability = [OD/ mean ODlt_u+MTT] * 100
Since the %NSMTT ≤ 0.0, there is no need to correct for interference of the test material.
Colouring and MTT Interacting Test Materials
Nonspecific colour in freeze-killed tissues (NSCkilled) was calculated. NSCkilled is the mean OD of the test material treated killed tissues without MTT reagent (ODkt_t-MTT) expressed as percentage of the mean of the negative control tissues (ODlt_u+MTT).
%NSCkilled = (ODkt_t-MTT) / ODlt_u+MTT) * 100
True tissue viability is calculated as the OD obtained with the test material treated living tissues incubated with MTT medium (ODlt_t+MTT), minus the OD obtained with the test material treated living tissues incubated with medium without MTT (ODlt_t-MTT), minus the difference between the mean OD of the untreated freeze-killed tissues (ODkt_u+MTT) and test material treated freeze-killed tissues (ODkt_t+MTT) plus the mean OD of the test material treated killed tissues without MTT reagent (ODkt_t-MTT), subsequently divided by the OD of the negative control (ODlt_u+MTT).
OD = ODlt_t+MTT– ODlt_t-MTT – (ODkt_t+MTT-ODkt_u+MTT) + ODkt_t-MTT
%Viability = (OD / ODlt_u+MTT) * 100. - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied: 50 µL
- Concentration: Undiluted. No correction was made for hte purity/composition of the test material.
NEGATIVE CONTROL
- Amount(s) applied: 50 μL
POSITIVE CONTROL
- Amount(s) applied: 50 μL
- Concentration: 8.0 N - Duration of treatment / exposure:
- 3 minutes and 1 hour
- Duration of post-treatment incubation (if applicable):
- 3 hours with MTT
- Number of replicates:
- 2
Results and discussion
In vitro
Resultsopen allclose all
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 3 minute exposure
- Value:
- 34
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 1 hour exposure
- Value:
- 3.6
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- - The test material was checked for colour interference in aqueous conditions and possible direct MTT reduction by adding the test material to MTT medium. Because a colour change was observed in aqueous conditions and by adding MTT-medium it was concluded that the test material did interact with the MTT endpoint.
- In addition to the normal 3-minute and 1-hour procedure, two freeze-killed tissues treated with test material and two freeze-killed negative control treated tissues were used for the cytotoxicity evaluation with MTT at each time point. The non-specific reduction of MTT by the test material was 79 and 89 % of the negative control tissues after 3 minutes and 1 hour respectively.
- In addition to the normal 3-minute and 1-hour procedure, two tissues were treated with test material. Instead of MTT solution these tissues were incubated with DMEM. The colour interference by the test material was 3.85 and 32 % of the negative control tissues after 3 minutes and 1 hour respectively.
- For the true tissue viability to be calculated, in addition to the normal 3-minute and 1-hour procedure, two freeze-killed tissues treated with test material were measured but instead of MTT solution these tissues were incubated with DMEM. The nonspecific colour in freeze-killed tissues by the test material was 20% and 28% of the negative control tissues after 3 minutes and 1 hour respectively.
- Skin corrosion is expressed as the remaining cell viability after exposure to the test material. The relative mean tissue viability obtained after the 3-minute and 1-hour treatments with the test material compared to the negative control tissues was 34 and 3.6 % respectively.
- The absolute mean OD570 (optical density at 570 nm) of the negative control tissues was within the acceptance limits of OECD 431 (lower acceptance limit ≥0.8 and upper acceptance limit ≤2.8) and the laboratory historical control data range. The mean relative tissue viability following the 1-hour exposure to the positive control was 7.6 %.
In the range of 20 – 100 % viability the Coefficient of Variation between tissue replicates was < 10 % , indicating that the test system functioned properly.
Because the non-specific reduction of MTT by the test material was 79 and 89 % of the negative control tissues after 3 minutes and 1 hour respectively, which is far above the acceptability criteria of 30 %, this test is considered unsuitable for this test material and therefore no prediction can be made.
Any other information on results incl. tables
Table 1: Mean Absorption in the in vitro Skin Corrosion Test
|
3-minute application |
1-hour application |
||||||||
A (OD570) |
B (OD570) |
Mean (OD570) |
SD |
A (OD570) |
B (OD570) |
Mean (OD570) |
SD |
|||
Negative control |
1.906 |
2.113 |
2.010 |
± |
0.146 |
1.934 |
2.100 |
2.017 |
± |
0.118 |
Test Material(1) |
0.724 |
0.662 |
0.693 |
± |
0.044 |
0.011 |
0.133 |
0.072 |
± |
0.087 |
Positive control |
0.184 |
0.170 |
0.177 |
± |
0.010 |
0.162 |
0.144 |
0.153 |
± |
0.013 |
SD = Standard deviation
Duplicate exposures are indicated by A and B.
(1) The test material values are corrected for the non-specific MTT reaction and color interference (79 and 89 for the MTT reaction and 3.85 and 32 for the color interference at the 3 minute and 1 hour treatment, respectively).
Table 2: Mean Tissue Viability in the in vitro Skin Corrosion Test
Treatment |
3-minute application viability (percentage of control) |
1-hour application viability (percentage of control) |
Negative Control |
100 |
100 |
Test Material |
34 |
3.6 |
Positive Control |
8.8 |
7.6 |
Applicant's summary and conclusion
- Interpretation of results:
- other: No prediction can be made
- Conclusions:
- Under the conditions of this study no prediction of skin corrosion potential can be made.
- Executive summary:
The skin corrosion potential of the test material was investigated in accordance with the standardised guidelines OECD 431 and EU Method B.40.bis, under GLP conditions.
The objective of this study was to evaluate the test material for its ability to induce skin corrosion on a human three dimensional epidermal model. The possible corrosive potential of the test material was tested through topical application for 3 minutes and 1 hour. The test material was applied undiluted (50 µL) directly on top of the skin tissue.
The positive control had a mean relative tissue viability of 7.6 % after the 1-hour exposure. The absolute mean OD570 (optical density at 570 nm) of the negative control tissues was within the acceptance limits of OECD 431 (lower acceptance limit ≥0.8 and upper acceptance limit ≤2.8) and the laboratory historical control data range. In the range of 20 – 100 % viability the Coefficient of Variation between tissue replicates was < 10 %, indicating that the test system functioned properly.
Because a colour change was observed in aqueous conditions and by adding MTT-medium it was concluded that the test material did interact with the MTT endpoint.
In addition to the normal 3-minute and 1-hour procedure, two freeze-killed tissues treated with test material and two freeze-killed negative control treated tissues were used for the cytotoxicity evaluation with MTT at each time point. The non-specific reduction of MTT by the test material was 79 and 89 % of the negative control tissues after 3 minutes and 1 hour respectively.
In addition to the normal 3-minute and 1-hour procedure, two tissues were treated with test material. Instead of MTT solution these tissues were incubated with DMEM. The colour interference by the test material was 3.85 and 32 % of the negative control tissues after 3 minutes and 1 hour respectively.
For the true tissue viability to be calculated, in addition to the normal 3-minute and 1-hour procedure, two freeze-killed tissues treated with test material were measured but instead of MTT solution these tissues were incubated with DMEM. The nonspecific colour in freeze-killed tissues by the test material was 20 and 28 % of the negative control tissues after 3 minutes and 1 hour respectively.
Skin corrosion is expressed as the remaining cell viability after exposure to the test material. The relative mean tissue viability obtained after 3-minute and 1-hour treatments with the test material compared to the negative control tissues was 34 and 3.6 %, respectively. Because the non-specific reduction of MTT by the test material was 79 and 89 % of the negative control tissues after 3 minutes and 1 hour respectively, which is far above the acceptability criteria of 30 %, this test is considered unsuitable for this test material and therefore no prediction can be made.
Under the conditions of this study no prediction of skin corrosion potential can be made.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.