Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-329-4 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of processing aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix) - Roller application etc. : Polymer preparations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Industrial use of adhesives
by roller and brushing with manual application
indoor, with LEV - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Industrial use of adhesives
by roller and brushing with manual application
indoor, without LEV - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix) - use of processing aids in finishing formulations: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix) - spraying of processing agents: apply them on crust
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Spraying (Reactive)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Spraying (Reactive) - Spraying of non-processing agents
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Inclusion in Matrix) - Production of preparations/articles by extrusion etc. : non processing non reactive agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Inclusion in Matrix) - use of non processing/exhausting aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Inclusion in Matrix) - Treatment of articles by dipping and pouring: non-processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Reactive)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Reactive) - use of reactive processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of non processing aids
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids) - Roller application etc. : processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor - Use of adhesives
by roller and brushing application with machine equipment
indoor, - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix) - use of processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids) - Roller application etc. : reactive processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial small scale application of adhesives
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial small scale application of adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Industrial small scale application of adhesives - Industrial small scale use of adhesives, sealants and primers indoors
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of coatings or inks
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial application of coatings or inks
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial application of coatings or inks - Product delivery/storage - product delivery - bulk - outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of coatings or inks - product delivery/storage OR waste management - storage of waste prior ro removal for off-site management
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial application of coatings or inks - product delivery/storage - product storage - indoor OR Application equipment cleaning - enclosed
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial application of coatings or inks - preparation of material for application - enclosed OR loading of application equipment - enclosed
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial application of coatings or inks - preparation of material for application - continuous - closed OR loading of application equipment - continuous - closed OR film formation
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial application of coatings or inks - preparation of material for application - batch - indoor OR Application equipment cleaning - open - indoor OR laboratory use - QC laboratory
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial application of coatings or inks - preparation of material for application - batch - outdoor - liquid products - powder products OR Application equipment cleaning - open - outdoor - in-situ
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial application of coatings or inks - preparation of material for application - transfer of material from one container to another - powder coatings OR loading of application equipment - batch - indoor OR loading of application equipment - transfer of material from one container to another OR waste management - transfer of process wastes to storage containers - in workplace - off-line
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of coatings or inks - loading of application equipment - batch - outdoor - liquid products
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial application of coatings or inks - application - on-line - roller, spreader, flow coating or printing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial application of coatings or inks - application
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial application of coatings or inks - application
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial application of coatings or inks - film formation - airdrying OR film formation - airdrying - indoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids) - Treatment of articles by dipping and pouring: reactive processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Spray-Drying: Spray-Drying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Coating
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Coating - application of permanent coating agents during foaming
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Spraying (Non-Reactive)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Spraying (Non-Reactive) - Spraying of processing agents
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Spray-Drying: Spray-Drying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids) - Treatment of articles by dipping and pouring: processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Spray-Drying: Spray-Drying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- lubrication
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- lubrication - lubrication during warp knitting or weaving
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Spray-Drying: Spray-Drying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Processing Aids - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: dipping and pouring
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - spraying of (non reactive) finishing products: apply them on crust
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth - Large-scale use of adhesives
by spray application,
indoor - Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (Monomers)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (Monomers) - spraying of reactive finishing products: apply them on crust
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- use for leather finishing (Monomers) - use of reactive finishing products: roller application or brushing on crust / use of reactive finishing products: dipping and pouring
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Monomers) - use of reactive finishing products: roller application or brushing on crust / use of reactive finishing products: dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Reactive)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Reactive) - Production of preparations/articles by extrusion etc. : cross linkers and curing agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- manipulation of substances bound in materials
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- manipulation of substances bound in materials - mechanical processes resulting of release of substances
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Large scale use of warm applied adhesives by low energy distribution indoor
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Large-scale use of reactive adhesives by low energy distribution and curing at elevated temperatures indoor
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- textile application: calendering
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- textile application: calendering - Calendering operations: non processing agents
- Process category (PROC):
- PROC 6: Calendering operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Mixing
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Mixing - formulation of recipe: foam
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in containment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial large scale spray application of adhesives in containment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in containment - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial large scale spray application of adhesives in containment - Large-scale use of adhesives by spray application, indoor
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial application of reactive adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of reactive adhesives - Mixing of 2- or multi component adhesives in mixing equipment in industry
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial application of reactive adhesives - Large-scale use of reactive adhesives
by low energy distribution,
indoor - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.