Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information- Remove contaminated clothing immediately and dispose it safely. In case of breathing difficulties give oxygen.
In case of inhalation- Remove the casualty into fresh air and keep him immobile. Seek medical treatment immediately. In case of respiratory standstill give artificial respiration by respirator and send for a doctor.
In case of skin contact- In case of contact with skin wash off immediately with soap and water. Remove contaminated clothing immediately, even underwear and shoes. Consult a doctor if skin irritation persists.
In case of eye contact- In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. If eye irritation persists: Get medical advice/attention (P337+P313).
In case of ingestion-Induce the patient to vomit by himself only if fully conscious. If swallowed seek medical advice immediately and show the doctor packing or label. Rinse mouth (P330).
Most important symptoms and effects, both acute and delayed
Physician's information / possible symptoms
Unconsciousness
Coughing
Headache
Confusion
Gastrointestinal complaints

Fire-fighting measures

Extinguishing media-Suitable extinguishing media
Foam
Dry fire-extinguishing substance
Carbon dioxide
Water spray jet

Extinguishing media which must not be used for safety reasons
Full water jet

Special hazards arising from the substance or mixture Pyrolysis products of aliphatic and aromatic hydrocarbons. In the event of fire, the following can be released:
Nitrogen oxides (NOx)
Carbon monoxide (CO)
Carbon dioxide (CO2)
Acryl acid

Advice for firefighters
Special protective equipment for fire-fighters
Use breathing apparatus with independent air supply. Wear full protective clothing. Do not inhale explosion and/or combustion gases.

Additional information
Cool endangered containers with water spray jet. Inhalation of dangerous decomposing products may cause severe damages to health. Keep people away and stay on the upwind side. Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Avoid dust formation.
Use personal protective clothing. Keep away sources of ignition.
Use breathing apparatus if exposed to vapours/dust/aerosol.

Environmental precautions
Collect contaminated water / firefighting water separately.
Do not discharge into the drains/surface waters/groundwater.
Methods and material for containment and cleaning up
Send in suitable containers for recovery or disposal.
Take up mechanically and send for disposal.

Handling and storage

Precautions for safe handling
Advice on safe handling
Care for thoroughly room ventilation, if necessary use in well ventilated area with local exhaust ventilation at workplace.
Open and handle container with care!

Advice on protection against fire and explosion Keep away from sources of ignition - No smoking
The product is not combustible but supports burning.
Pay attention to general rules of internal fire prevention.
Avoid formation of dust.

Conditions for safe storage, including any incompatibilities
Requirements for storage rooms and vessels
Ventilate store-rooms thoroughly. Keep only in original container.

Advice on storage compatibility
Do not store with acids, alkalis or combustible materials. Do not store with oxidizing agents.

Further information on storage conditions
Keep container tightly closed, store at cool and aired place, open and handle carefully. Protect from light.
Protect from heat/overheating.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Respiratory protection
If ventilation insufficient, wear respiratory protection.
Filter apparatus, filter A/P3

Hand protection
Gloves made of Polychloroprene.
Gloves made of butyl rubber.
Glove material specification [make/type, thickness, permeation time/life, wetting resistance]:
The chemical resistance of the personal protection gloves for this special application should be clarified and confirmed by the supplier.
Recommended protection glove type (use restriction time in hrs): KCL Camapren #722 (8 h).
KCL Dermatril (One-way glove for short-time contact only).
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.

Eye protection
safety goggles with side protection

Skin protection
protective overalls, heavy materials
!
General protective measures
Avoid contact with eyes and skin
Do not inhale dust.
Hygiene measures
Wash hands thoroughly after handling (P264).
Do not eat, drink or smoke when using this product. (P270).
Take off contaminated clothing and wash before reuse (P362).
Wash hands before breaks and after work.

Stability and reactivity

Reactivity
Reactions with light.

Chemical stability
Risk of polymerization.
Possibility of hazardous reactions
Reactions with catalysts, oxidising agents and strong alkalis.

Conditions to avoid
Accumulation of fine dust may entail the risk of a dust explosion in the presence of air.

Incompatible materials
Materials to avoid
Polymerisation initiators (alkali hydroxides, amines, ammonia, sulfuric acid).

Hazardous decomposition products
Carbon monoxide and carbon dioxide.
Nitrous oxides (NOx)
Pyrolysis products, aromatic and aliphatic.
acrylamide

Disposal considerations

Waste treatment methods
Waste code No. Name of waste
08 04 09* waste adhesives and sealants containing organic solvents or other dangerous substances
08 04 11* adhesive and sealant sludges containing organic solvents or other dangerous substances
08 04 99 wastes not otherwise specified

Wastes marked with an asterisk are considered to be hazardous waste pursuant to Directive 91/689/EEC on hazardous waste.

Recommendations for the product
Dispose of contents/container according to local national regulations (P501).
In accordance with regulations for special waste, must be taken, after pre-treatment, to an authorised special waste incineration plant.

Recommendations for packaging
Packaging that cannot be cleaned should be disposed of like the product.

General information
Disposal according to 91/692/EEC.