Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 603-498-3 | CAS number: 131610-58-7
Guidance on Safe Use
Administrative data
First-aid measures
After inhalation: fresh air. Call in physician.
After skin contact: wash off with plenty of water. Remove contaminated clothing. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Most important symptoms and effects, both acute and delayed
Allergic reactions, Dizziness, narcosis, agitation, spasms, inebriation, Nausea, Vomiting, Headache, blindness, Impairment of vision, Coma
Indication of any immediate medical attention and special treatment needed
Mention methanol.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media
Carbon dioxide (CO2), Foam, Dry powder, Water
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture
Combustible.
Risk of dust explosion.
Development of hazardous combustion gases or vapours possible in the event of fire.
Advice for firefighters
Special protective equipment for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Accidental release measures
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders: Protective equipment see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills.
Observe possible material restrictions
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.
Handling and storage
Handling and storage
Precautions for safe handling
Advice on safe handling
Work under hood. Do not inhale substance/mixture.
Observe label precautions.
Hygiene measures
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Conditions for safe storage, including any incompatibilities
Storage conditions
Tightly closed. Dry.
Recommended storage temperature see product label.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
See section 7.1.
Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material:
butyl-rubber
Glove thickness:
0,7 mm
Break through time:
> 480 min
splash contact:
Glove material:
Viton (R)
Glove thickness:
0,70 mm
Break through time:
> 120 min
Respiratory protection
required when dusts are generated.
Recommended Filter type: Filter A-(P2)
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Environmental exposure controls
Do not let product enter drains.
Stability and reactivity
Stability and reactivity
Reactivity
Risk of dust explosion.
Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions
Violent reactions possible with:
Strong oxidizing agents
Conditions to avoid
no information available
Incompatible materials
no information available
Hazardous decomposition products
no information available
Disposal considerations
See www.retrologistik.com for processes regardi
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
