Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 254-104-8 | CAS number: 38725-13-2
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 2017-12-19 to 2018-05-08
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Freshwater Alga and Cyanobacteria, Growth Inhibition Test)
- Version / remarks:
- adopted 2006, corrected 2011
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.3 (Algal Inhibition test)
- Version / remarks:
- 2016
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Triisononylamine
- EC Number:
- 254-104-8
- EC Name:
- Triisononylamine
- Cas Number:
- 38725-13-2
- Molecular formula:
- C27H57N
- IUPAC Name:
- tris(7-methyloctyl)amine
- Test material form:
- liquid
Constituent 1
Sampling and analysis
- Analytical monitoring:
- yes
- Details on sampling:
- Duplicate samples were taken from the test media of all test concentrations and from the control at the start of the test (without algae).
After 24, 48 hours and at the end of the test (after 72 hours), stability samples (containing algae) were taken in duplicate from all test concentrations and from the control.
The stability samples at 24 and 48 hours (duplicates 10 mL samples) could not be taken from the test vessels themselves, as the principle of a closed system is, that the test vessels have to remain completely filled with test medium during the entire test period. Therefore, for this sampling at 24 and 48 hours, a set of additional flasks containing the corresponding test medium (with algae) was incubated under conditions identical to the test.
For sampling at the end of the test, the test medium of the treatment replicates was pooled.
An additional test vessel with test medium at the dilution 1:10 was incubated under the following conditions:
- Test medium with algae under light conditions but remain closed over the entire test duration as a volatility control.
Immediately after sampling, methanol + 0.2% formic acid (10 mL methanol + 0.2% formic acid per 10 mL sample volume) was added to each sample to stabilize the latter during the storage period. Thereafter, all samples were frozen (at -20 ± 5 °C). Based on pre-experiments for investigation of the storage stability, the test item was found to be stable in the test water under these storage conditions.
The concentrations of TRIISONONYLAMINE were analytically measured in one of the duplicate samples taken from all treatments and all sampling dates. From the volatility control one of the duplicate samples was measured after 72 hours.
Test solutions
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
:
As the test item is a liquid with low water solubility, the slow-stirring method was applied for preparation of a saturated test item solution. For this, 283 μL of test item were carefully applied (pipetted) onto the surface of 2320 mL test water. This volume is equivalent to a loading rate of 100 mg/L, considering the density of the test item of 0.820 g/cm3 (at 20 °C). No auxiliary solvent or emulsifier was used. The mixing vessel was nearly completely filled (a small headspace had to be included as the test item was floating on the water surface) and tightly sealed with glass stoppers. Thereafter slow-stirring was applied for 96 hours in the closed vessel to reach a maximum concentration of dissolved test item in the test water. The stirring time was based on the results of a stirring experiment where the saturation of dissolved test item was achieved after 96 hours. After this treatment the lower part of the equilibrated test medium was carefully harvested from the mixing vessel through a tap at the bottom of the vessel. The rest of the test medium with undissolved test item floating on the surface remained in the stirring vessel. The equilibrated test medium was used as the highest concentration tested and was further used in a series of dilutions with test water to prepare the lower concentrated test media. The test media were prepared just before the start of the test. The preparation of the test media was based on the OECD Guidance Document No. 23 on Aquatic Toxicity Testing of Difficult Substances and Mixtures, 2000.
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): All solutions were clear with no evidence of undissolved test item
Test organisms
- Test organisms (species):
- Pseudokirchneriella subcapitata (previous names: Raphidocelis subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Pseudokirchneriella subcapitata
- Strain: No. 61.81 SAG
- Source (laboratory, culture collection): supplied by the Collection of Algal Cultures (SAG, Institute for Plant Physiology, University of Göttingen, 37073 Göttingen / Germany).
- Age of inoculum (at test initiation): An inoculum culture was set up four days before the start of the exposure. The algae were cultivated under the test conditions and were kept in the exponential growth phase until inoculation of the test solutions.
- Method of cultivation: The algae were cultivated at IES Ltd Laboratories under standardized conditions according to the test guidelines.
ACCLIMATION
- Acclimation period: not needed since same culture and test conditions
- Culturing media and conditions (same as test or not): The algae were cultivated and tested in synthetic test water (AAP Medium), prepared according to the test guidelines, but modified according to the International Standard ISO 14442 as a closed test system was applied.
- Any deformed or abnormal cells observed: no
Study design
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
Test conditions
- Hardness:
- The water hardness (calculated) of the test water was 0.15 mmol/L (= 15 mg/L as CaCO3).
- Test temperature:
- The water temperature during the test was maintained at 23 °C.
- pH:
- The pH in the control was 7.5 at test start and 7.7 at test end.
The pH of the test media was in the range of 7.4 to 7.7 during the test period. - Nominal and measured concentrations:
- Nominal: The equilibrated aqueous phase with a loading rate of 100 mg/L, containing dissolved test item only, was tested as the highest test concentration and used in a series of dilutions with test water to prepare the lower concentrated test media: dilutions 1:3.2, 1:10, 1:32 and 1:100.
Mean measured (arithmetic mean): 330, 175, 41, 17, 13 ng/L - Details on test conditions:
- TEST SYSTEM
- Test vessel/Type/Material, size, headspace, fill volume: Since the test item was determined to be volatile, glass stoppered Erlenmeyer flasks were used completely filled (without headspace) with about 60 mL of test medium and tightly sealed with glass stoppers to avoid losses of the volatile substance by evaporation (closed system).
- Aeration: no, but orbital shaker was used.
- Initial cells density: 5000 cells/mL corresponding to 0.62 x 10E+4 relative fluorescence units.
- Control end cells density: 145 x 10E+4 relative fluorescence units.
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 6
GROWTH MEDIUM
- Standard medium used: yes AAP Medium
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: The algae were cultivated and tested in synthetic test water (AAP Medium), prepared according to the test guidelines, but modified according to the International Standard ISO 14442 as a closed test system was applied. Analytical grade salts were dissolved in sterile purified water. The concentration of NaHCO3 was increased from 15 to 250 mg/L (as carbon source for the algal growth) and 6 mmol/L HEPES-buffer (corresponding to 1430 mg/L) were added to keep the pH of the test media as constant as possible. The pH of the test water was adjusted to 7.5. The water hardness (calculated) of the test water was 0.15 mmol/L (= 15 mg/L as CaCO3).
- Intervals of water quality measurement: The light intensity was measured at the start of the test. The pH was measured and recorded in each treatment at the start and end of the test. The temperature in the incubator was monitored and recorded continuously. The appearance of the test media was also visually controlled and recorded daily during the exposure period.
OTHER TEST CONDITIONS
- Sterile test conditions: no
- Adjustment of pH: only the pH of the test water was adjusted to 7.5
- Photoperiod/Light intensity and quality: continuously illuminated by LED light installed above the test flasks. The light intensity at the level of the test solutions was approximately 64 μE s-1 m-2 (range: 62 to 68 μE s-1 m-2, measured at nine places in the experimental area). The light intensity over the incubation area was within a ±15%-deviation from the average light intensity as recommended by the guideline.
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Determination of cell concentrations: A small volume (100 μL per sample) of the algal suspension was withdrawn daily from each test flask for the measurement of the biomass, and was not replaced. The algal biomass in the samples was determined by fluorescence measurement (SpectraMax I3x, Molecular Devices Ltd, Wokingham Berkshire/UK). The measurements were performed at least in duplicate at an excitation of 440 nm and emission of 680 nm.
- Other: At the end of the test, a sample was taken from the control and from the dilution 1:10 to determine under the microscope a potential influence of the test item on the shape and size of the algal cells. This test concentration was chosen since the algal cell density at the two highest concentrations (dilution 1:3.2 and undiluted equilibrate medium) were too low for a reliable examination.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 3.2
- Range finding study:
- Test concentrations: the undiluted test medium with a loading rate of 100 mg/L and the dilutions 1:5 and 1:25. Three replicates per treatment were tested in parallel with a control.
- Results used to determine the conditions for the definitive study:
1:25: 3.6% Inhibition of Average Growth Rate after 72 H
1:5: 45% Inhibition of Average Growth Rate after 72 H
Undiluted test medium: 145% Inhibition of Average Growth Rate after 72 H - Reference substance (positive control):
- yes
- Remarks:
- Potassium dichromate
Results and discussion
Effect concentrationsopen allclose all
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 113 ng/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% CI: 103-123
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 36 ng/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% CI: 30-42
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC20
- Effect conc.:
- 53 ng/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% CI: 46-60
- Key result
- Duration:
- 72 h
- Dose descriptor:
- LOEC
- Effect conc.:
- 41 ng/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 17 ng/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Details on results:
- - Exponential growth in the control (for algal test): yes
- Observation of abnormalities (for algal test): The microscopic examination of the algal cells at the end of the test showed no difference between the algae growing at the dilution 1:10 (mean measured 41 ng/L) and the algal cells in the control. The shape and size of the algal cells were obviously not affected by the test item up to at least this concentration.
- Any observations (e.g. precipitation) that might cause a difference between measured and nominal values: All test media were clear solutions throughout the test period.
- Effect concentrations exceeding solubility of substance in test medium: no - Results with reference substance (positive control):
- For evaluation of the algal quality and experimental conditions, potassium dichromate is tested as a positive control twice a year to demonstrate satisfactory test conditions. The 72-hour EC50 for growth rate in the reference test was 1.1 mg/L (October 2017) and showed that the sensitivity of the test system was within the range recommended by the guideline (72-hour EC50 for the growth rate 0.9-1.5 mg/L).
- Reported statistics and error estimates:
- Growth rate and yield were calculated for each test flask. The mean values for growth rate μ and yield Y were calculated for each treatment.
The 72-hour EC10, EC20 and EC50 values for the inhibition of average growth rate and yield and their 95% confidence intervals were calculated by Probit Analysis using linear maximum likelihood regression.
For the determination of the LOEC and NOEC, the average growth rate and yield at the test concentrations were compared to the control values by Step-down Jonckheere-Terpstra test, Williams t-test and Welch t-test with Bonferroni-Holm-adjustment, where appropriate.
Statistical analysis was performed using ToxRat Professional®.
Any other information on results incl. tables
The measured concentrations of the test item in the test media are shown in the table below. The course of the test item concentrations showed no clear tendency during the test period of 72 hours. The mean measured test item concentrations were calculated as the arithmetic means over all measurements.
Treatment / Dilution° |
Analytically Measured Concentration |
Mean Measured Concentration (arithmetic mean) [ng/L] |
|||
0 Hours |
24 Hours |
48 Hours |
72 Hours |
||
1:100 |
12.3 |
13 |
10.6 |
9.45 |
13 |
1:32 |
20.6 |
17 |
9.72 |
22.9 |
17 |
1:10 |
57.9 |
41 |
26.3 |
60.4 |
41 |
1:3.2 |
194 |
175 |
181 |
257 |
175 |
Undiluted Test Medium°° |
625 |
330 |
113 |
414 |
330 |
°: Dilutions of the equilibrated test medium with a loading rate of 100 mg/L.
°°: Undiluted equilibrated test medium with a loading rate of 100 mg/L.
The biological results are based on the mean measured arithmetic test item concentrations.
Growth rate
At the mean measured concentrations of 17 to 330 ng/L, the mean inhibitions compared to the control were in the range of 1.8 to 142 % and were statistically significantly different from the control (results of Welch t-test, one-sided smaller, a = 0.05).
However, the statistically significant finding at the test concentration of 17 ng/L (mean inhibition compared to the control of 1.8 %) was not estimated as biologically relevant toxic effect, since the variability between replicates within this concentration and the control was very low (coefficient of variation of 0.6 and 1.0 %, respectively). Moreover the mean inhibition compared to the control was below 10 %. The EC10for growth rate was calculated to be 36 ng/L.
Therefore, the NOEC for growth rate was determined to be at the mean measured concentration of 17 ng/L.
Yield
At the mean measured concentrations of 41 to 330 ng/L, the mean inhibitions compared to the control were in the range of 61 to 100 % and were statistically significantly different from the control (results of Step-downJonckheere-Terpstra test, one-sided smaller, a = 0.05).
Therefore, the NOEC for yield was determined to be at the mean measured concentration of 17 ng/L.
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Remarks:
- In the ctrl, biomass increased by 232 over 72h. The mean CV of the daily growth rates in the ctrl (section-by-section growth rates) during 72h was 6.8%. The CV of the average specific growth rates in the replicates of the ctrl after 72h was 1.0%.
- Conclusions:
- Endpoint after 72 Hours:
EC10: 36 ng/L (growth rate), 18 ng/L (yield)
EC20: 53 ng/L (growth rate), 23 ng/L (yield)
EC50: 113 ng/L (growth rate), 35 ng/L (yield)
NOEC: 17 ng/L (growth rate), 17 ng/L (yield)
LOEC: 41 ng/L (growth rate), 41 ng/L (yield) - Executive summary:
The impact of the test item on the growth of the freshwater green algal species Pseudokirchneriella subcapitata was investigated in a 72-hour static test according to the OECD Guideline 201 (2006, corrected 2011) and the Commission Regulation (EU) No 2016/266, C.3, and following GLP.
As the test item is a volatile substance, the test was performed using glass stoppered Erlenmeyer flasks (closed system) completely filled with test medium, minimizing the air space in the flasks and avoiding potential losses of test item by evaporation. As the test item is a liquid with low water solubility, the slow-stirring method (to avoid formation of micro-droplets) was applied for the preparation of a saturated test item solution. The test item with specific gravity of 0.820 was carefully applied (pipetted) onto the surface of the test water at a loading rate of 100 mg/L. Thereafter slow-stirring was applied for 96 hours in a closed vessel to reach a maximum concentration of dissolved test item in the test water.
The stirring vessel was nearly completely filled (a small headspace had to be included as the test item was floating on the water surface) and tightly sealed with glass stoppers to avoid losses of the volatile test item during stirring. After this treatment the lower part of the equilibrated test medium was carefully harvested from the stirring vessel through a tap at the bottom of the vessel. This equilibrated aqueous phase with a loading rate of 100 mg/L, containing dissolved test item only, was tested as the highest test concentration and used in a series of dilutions with test water to prepare the lower concentrated test media: dilutions 1:3.2, 1:10, 1:32 and 1:100. Additionally, a control (test water without test item) was tested in parallel. The preparation of the test media was based on the OECD Guidance Document No. 23 on Aquatic Toxicity Testing of Difficult Substances and Mixtures, 2000. The daily concentrations of the test item in the test media of all test concentrations were measured. The course of the test item concentrations showed no clear tendency during the test period of 72 hours. The mean measured test item concentrations were calculated as the arithmetic means over all measurements.
The biological results are based on the mean measured arithmetic test item concentrations.
A clear concentration-response relationship was observed for both biological endpoints growth rate and yield after the exposure period of 72 hours. A statistically significant inhibitory effect on the growth rate and yield of the algae was observed at the end of the test at the mean measured concentrations of 41 to 330 ng/L.
Endpoint after 72 Hours:
EC10: 36 ng/L (growth rate), 18 ng/L (yield)
EC20: 53 ng/L (growth rate), 23 ng/L (yield)
EC50: 113 ng/L (growth rate), 35 ng/L (yield)
NOEC: 17 ng/L (growth rate), 17 ng/L (yield)
LOEC: 41 ng/L (growth rate), 41 ng/L (yield)
All validity criteria (i.e. increase of biomass, mean coefficient of variation of the daily growth rates and coefficient of variation of the average specific growth rates) were fulfilled.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.