Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2018-01-17 to 2018-02-06
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.6 (Water Solubility)
Qualifier:
according to guideline
Guideline:
OECD Guideline 105 (Water Solubility)
Qualifier:
according to guideline
Guideline:
EPA OPPTS 830.7840 (Water Solubility)
GLP compliance:
no
Type of method:
column elution method
Water solubility:
0.14 mg/L
Conc. based on:
test mat. (dissolved fraction)
Incubation duration:
2 h
Temp.:
20 °C
pH:
ca. 6.8

Run 1: Regarding fractions 06 to 15 the solubility varied between 0.115 mg/L and 0.177 mg/L. Average solubility: 0.156 mg/L (RSD: 13.0%)

Table 1 Column elution method, Run 1 (25 mL/h); Test material used for coating: 51.72 mg

 Fraction no.  Approx. volume (mL)  pH  Cs (mg/L)
  Fraction 06  15.0  7.4  0.142
  Fraction 07  15.5  7.1  0.158
  Fraction 08  14.5  6.8  0.169
  Fraction 09  14.5  6.7  0.167
  Fraction 10  15.0  6.6  0.131
  Fraction 11  14.5  6.6  0.157
  Fraction 12  15.5  6.5  0.177
  Fraction 13  14.5  6.9  0.168
  Fraction 14  15.0  6.8  0.115
  Fraction 15 15.5   6.6  0.172

Run 2: Regarding fractions 06 to 15 the solubility varied between 0.097 mg/L and 0.154 mg/L. Average solubility: 0.121 mg/L (RSD: 14.5%)

Table 2 Column elution method, Run 2 (12.5 mL/h); Test material used for coating: 51.30 mg

Fraction no.  Approx. volume (mL)  pH  Cs (mg/L)
  Fraction 06  14.0  6.8  0.113
  Fraction 07  14.5  6.8  0.112
  Fraction 08  14.5  6.8  0.147
  Fraction 09  14.5  6.7  0.097
  Fraction 10  14.0  6.8  0.105
  Fraction 11  14.5  7.0  0.154
  Fraction 12  15.5  6.7  0.117
  Fraction 13  14.5  6.9  0.120
  Fraction 14  14.0  6.9  0.123
  Fraction 15 14.5   6.6  0.128

The determined water solubilities for RUN 1 and RUN 2 show a repeatability of < 30 %, therefore the results of the two runs are considered to be in accordance. At the end of each column elution experiment, there was still enough test item left on the surface of the glass beads at the end of all runs. There were no visible change in the coating during the runs.

Conclusions:
The water solubility of the test item was found to be 0.14 mg/L at pH 6.8 and a temperature of 20 °C.
Executive summary:

The water solubility of the test item was determined in distilled water according to the "column elution method" described in the European Commission Council regulation (EC) No 440/2008, Annex, Part A, A.6., OECD-guideline 105 and the EPA Product Properties Test Guideline OCSPP 830.7840 and found to be 0.14 mg/L at pH 6.8 and a temperature of 20 °C.

Description of key information

The water solubility of the test item was found to be 0.14 mg/L at pH 6.8 and a temperature of 20 °C.

Key value for chemical safety assessment

Water solubility:
0.14 mg/L
at the temperature of:
20 °C

Additional information