Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 228-244-5 | CAS number: 6192-13-8
Guidance on Safe Use
Administrative data
First-aid measures
- General information: Immediately remove any clothing soiled by the product.
- After inhalation: Supply fresh air and seek medical treatment in case of complaints.
- After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
- After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
- After swallowing: If swallowed, rinse mouth with water (only if the person is conscious). Drink plenty of water and provide fresh air. Induce vomiting only, if affected person is fully conscious. Call for a doctor immediately.
- Information for doctor: Treat symptomatically.
Fire-fighting measures
- Suitable extinguishing agents: Water spray, Foam, Fire-extinguishing powder and Carbon dioxide.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
- During heating or in case of fire poisonous gases are produced.
ADVICE FOR FIREFIGHTERS
- Wear self-contained respiratory protective device and do not inhale explosion gases or combustion gases.
- Additional information: Dispose of fire debris and contaminated fire-fighting water in accordance with official regulations.
Accidental release measures
- Wear protective equipment
- Avoid contact with the eyes and skin
- Avoid formation of dust
ENVIRONMENTAL PRECAUTIONS
- Damp down dust with water spray.
- Do not allow to enter sewers/ surface or ground water.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
- Pick up mechanically.
- Avoid formation of dust.
- Send for recovery or disposal in suitable receptacles.
- Neutralise residues on floor with solid sodium carbonate.
Handling and storage
- Wear protective clothing.
- Avoid contact with the eyes and skin.
- Prevent formation of dust.
- Provide suction extractors if dust is formed.
- Any unavoidable deposit of dust must be regularly removed.
INFORMATION ABOUT FIRE- AND EXPLOSION PROTECTION
- No special measures required
CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITES
- Requirements to be met by storerooms and receptacles: Store in cool, dry conditions in well sealed receptacles.
- Information about storage in one common storage facility: Not required
- Further information about storage conditions: Keep container tightly sealed and protect from humidity and water.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not classified as dangerous goods
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not classified as dangerous goods
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not classified as dangerous goods
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified as dangerous goods
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
- General protective and hygienic measures: Do not eat, drink, smoke or sniff while working. Wash hands before breaks and at the end of work, avoid contact with the eyes and skin. Do not inhale dust / smoke / mist. Use skin protection cream for skin protection.
- Respiratory protection: Not necessary if room is well-ventilated, but use suitable respiratory protective device when high concentrations are present.
- Recommended filter device for short term use: Filter P2 and Filter FFP2.
- Protection of hands: Protective gloves – Butyl rubber (BR), Nitrile rubber (NBR). Penetration time of glove material - Value for the permeation: Level ≥ 120 min. (EN 374). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Eye protection: Safety glasses
- Body protection: Protective work clothing
Stability and reactivity
- Possibility of hazardous reactions: Reacts with strong alkali e.g. NaOH.
- Conditions to avoid: No further relevant information available.
- Incompatible materials: No further relevant information available.
- Hazardous decomposition products: In case of heat, the following can be released: Vapour of acetic acid
Disposal considerations
- Recommendation: Contact manufacturer for recycling information. Disposal must be made according to official regulations.
- Waste disposal key: 51540 (ÖNORM S 2100)
European waste catalogue 06 03 14
- Uncleaned packaging recommendation: Non contaminated packaging may be recycled. Packaging that may not be cleaned is to be disposed of in the same manner as the product. Disposal must be made according to official regulations.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
