Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 249-352-9 | CAS number: 28983-56-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Data is from peer reviewed journal
- Justification for type of information:
- Data is from peer reviewed journal
- Qualifier:
- according to guideline
- Guideline:
- other: as mentioned below
- Principles of method if other than guideline:
- Adsorption study was conducted for evaluating the adsorption capacity of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate from aqueous solution by using Pseudomonas putida MTCC 4910. The study was performed using the batch equilibrium method.
- GLP compliance:
- not specified
- Type of method:
- batch equilibrium method
- Media:
- sewage sludge
- Specific details on test material used for the study:
- - Name of test material (IUPAC name): Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate
- Common name: Methyl blue, Acid blue 93
- Molecular formula: C37H26N3Na2O9S3
- Molecular weight: 800.8182 g/mol
- Smiles notation: c1cc(ccc1C(=C2C=CC(=[NH+]c3ccc(cc3)S(=O)(=O)[O-])C=C2)c4ccc(cc4)Nc5ccc(cc5)S(=O)(=O)[O-])Nc6ccc(cc6)S(=O)(=O)O.[Na+].[Na+]
- InChl: 1S/C37H29N3O9S3.2Na/c41-50(42,43)34-19-13-31(14-20-34)38-28-7-1-25(2-8-28)37(26-3-9-29(10-4-26)39-32-15-21-35(22-16-32)51(44,45)46)27-5-11-30(12-6-27)40-33-17-23-36(24-18-33)52(47,48)49;;/h1-24,38-39H,(H,41,42,43)(H,44,45,46)(H,47,48,49);;/q;2*+1/p-1
- Substance type: Organic
- Physical state: Solid
- Analytical purity: > 90%
- Other: Test chemical Acid blue 93 was collected from textile industry. The absorbance value was measured using UV-Vis spectrophotometer (Perkin Elmer, mode lambda 35). All chemicals used were of highest purity and of analytical grade. - Radiolabelling:
- not specified
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: Test chemical concentrations used for the study were in the range from 50-300 mg/l, respectively.
- Details on test conditions:
- TEST CONDITIONS
- Buffer: The medium used for the interaction contains 1 mM NaCl prepared in distilled water.
- pH: at different pH i.e 4-9, respectively
TEST SYSTEM
- Type, size and further details on reaction vessel: Rotary shaker
- Measuring equipment: UV–visible spectrophotometer - Computational methods:
- The adsorption process is normally described by the Freundlich and the Langmuir models. The adsorption data were fitted to linearized forms of both Freundlich and Langmuir isotherms to find out the optimum isotherm relationship. The Freundlich adsorption isotherm model assumes the multilayer of adsorption process. The Freundlich equation is an empirical equation and can be expressed as follows:
q = kFC1/n e
where,
‘Ce’ - concentration of Acid Blue 93 left in the supernatant after the interaction with bacterial cells (mg/L),
‘qe’ - equilibrium of adsorption (pg/cell);
‘kF’ is the Freundlich constant (pg/cell) (L/mg)1/n.
The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Acid Blue 93 on P. putida than Langmuir model.
The Langmuir equation is expressed as follows:
q = qmax.Ka.Ce/ 1 + Ka.Ce
where,
‘Ce’ - amount of dye left out in the supernatant (mg/L),
‘qe’ - amount equilibrium of adsorption (pg/cell),
‘qmax’ - maximum amount of dye at P. putida surface for a monolayer and
‘Ka’ - adsorption constant and related free energy of biosorption (L/mg). - Key result
- Remarks on result:
- other: The bacterial species exhibited almost 90–100% removal of Acid Blue 93 at an initial concentration of 250 mg/L in all the pH (4–9) tested.
- Transformation products:
- not specified
- Details on results (Batch equilibrium method):
- The effect of pH on the adsorption of Acid Blue 93 on bacterial cells was determined at different pH (4–9). There was no change in the adsorption of Acid Blue 93 on bacterial cells observed at pH 4–9, respectively. The control tube (the tube containing dye devoid of bacterial cells) showed very small reduction from initial dye concentrations and the test values were plotted by subtracting from the control dye concentrations.
The amount of the dye adsorbed was determined to be constant at different pH 4-9 and ranges from 2.3 to 2.4, respectively.
The Freundlich adsorption isotherm of the chemical Acid Blue 93 was determined to be 0.9912 (R2). The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Acid Blue 93 on P. putida than Langmuir model. - Validity criteria fulfilled:
- not specified
- Conclusions:
- The bacterial species exhibited almost 90–100% removal of Acid Blue 93 at an initial concentration of 250 mg/L in all the pH (4–9) tested. The amount of the dye adsorbed was determined to be constant at different pH 4-9 and ranges from 2.3 to 2.4, respectively and the Freundlich adsorption isotherm of the chemical Acid Blue 93 was determined to be 0.9912 (R2). The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Acid Blue 93 on P. putida than Langmuir model and thus chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclo hexa-2,5-dien-1-ylidene]amino]benzenesulphonate can be considered to have strong sorption on sewage sludge.
- Executive summary:
Adsorption study was conducted for evaluating the adsorption capacity of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (Acid blue 93) (CAS no.28983-56-4) from aqueous solution by using Pseudomonas putida MTCC 4910. The study was performed using thebatch equilibrium method.P. putidaMTCC 4910 strain used in present study was obtained from Institute of Microbial Technology, Chandigarh, India. The bacterium was cultured in a nutrient broth medium and incubated at 37◦C in a rotary shaker at 150 rpm overnight. The culture was maintained on agar slants at 4◦C and subcultured on nutrient agar medium at monthly intervals.Test chemical concentrations used for the study were in the range from 50-300 mg/l, respectively.The adsorption isotherm experiment was performed by interacting varying concentrations of dye (50–300 mg/L) solutions withP. putida(1×108 CFU/mL) in a rotary shaker at 150 rpm for 4 h. The medium used for the interaction contains 1 mM NaCl prepared in distilled water. The interaction was followed by centrifugation at 10,000×gfor 10 min. The supernatants were carefully collected and the amounts of dye left in the supernatants were calculated by using UV–visible spectrophotometer by measuring the absorbance at 604 nm. The dye without bacteria was used as control. For determined the effect of pH on adsorption, the experiment procedure used was same as described but at different pH (4–9).The bacterial species exhibited almost 90–100% removal of Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate at an initial concentration of 250 mg/L in all the pH (4–9) tested.The amount of the dye adsorbed was determined to be constant at different pH 4-9 and ranges from 2.3 to 2.4, respectively and the Freundlich adsorption isotherm of the chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate was determined to be 0.9912 (R2). The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate on P.putida than Langmuir model and thus chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate can be considered to have strong sorption on sewage sludge.
Reference
Description of key information
Adsorption study was conducted for evaluating the adsorption capacity of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (Acid blue 93) (CAS no.28983-56-4) from aqueous solution by using Pseudomonas putida MTCC 4910 (A. Arunarani, et. al; 2013)
. The study was performed using thebatch equilibrium method.P. putidaMTCC 4910 strain used in present study was obtained from Institute of Microbial Technology, Chandigarh, India. The bacterium was cultured in a nutrient broth medium and incubated at 37◦C in a rotary shaker at 150 rpm overnight. The culture was maintained on agar slants at 4◦C and subcultured on nutrient agar medium at monthly intervals.Test chemical concentrations used for the study were in the range from 50-300 mg/l, respectively.The adsorption isotherm experiment was performed by interacting varying concentrations of dye (50–300 mg/L) solutions withP. putida(1×108 CFU/mL) in a rotary shaker at 150 rpm for 4 h. The medium used for the interaction contains 1 mM NaCl prepared in distilled water. The interaction was followed by centrifugation at 10,000×gfor 10 min. The supernatants were carefully collected and the amounts of dye left in the supernatants were calculated by using UV–visible spectrophotometer by measuring the absorbance at 604 nm. The dye without bacteria was used as control. For determined the effect of pH on adsorption, the experiment procedure used was same as described but at different pH (4–9).The bacterial species exhibited almost 90–100% removal of Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate at an initial concentration of 250 mg/L in all the pH (4–9) tested.The amount of the dye adsorbed was determined to be constant at different pH 4-9 and ranges from 2.3 to 2.4, respectively and the Freundlich adsorption isotherm of the chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate was determined to be 0.9912 (R2). The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate on P.putida than Langmuir model and thus chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate can be considered to have strong sorption on sewage sludge.
Key value for chemical safety assessment
Additional information
Various experimental studies for the target compound Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No. 28983-56-4) were reviewed for the adsorption end point which are summarized as below:
In an experimental key study from peer reviewed journal (A. Arunarani, et. al; 2013), adsorption experiment was conducted for evaluating the adsorption capacity of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (Acid blue 93) (CAS no.28983-56-4) from aqueous solution by using Pseudomonas putida MTCC 4910. The study was performed using the batch equilibrium method. P. putida MTCC 4910 strain used in present study was obtained from Institute of Microbial Technology, Chandigarh, India. The bacterium was cultured in a nutrient broth medium and incubated at 37◦C in a rotary shaker at 150 rpm overnight. The culture was maintained on agar slants at 4◦C and subcultured on nutrient agar medium at monthly intervals. Test chemical concentrations used for the study were in the range from 50-300 mg/l, respectively. The adsorption isotherm experiment was performed by interacting varying concentrations of dye (50–300 mg/L) solutions with P. putida(1×108 CFU/mL) in a rotary shaker at 150 rpm for 4 h. The medium used for the interaction contains 1 mM NaCl prepared in distilled water. The interaction was followed by centrifugation at 10,000×gfor 10 min. The supernatants were carefully collected and the amounts of dye left in the supernatants were calculated by using UV–visible spectrophotometer by measuring the absorbance at 604 nm. The dye without bacteria was used as control. For determined the effect of pH on adsorption, the experiment procedure used was same as described but at different pH (4–9).The bacterial species exhibited almost 90–100% removal of Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate at an initial concentration of 250 mg/L in all the pH (4–9) tested. The amount of the dye adsorbed was determined to be constant at different pH 4-9 and ranges from 2.3 to 2.4, respectively and the Freundlich adsorption isotherm of the chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate was determined to be 0.9912 (R2). The high ‘R2’ values (linear regression coefficients) indicate that the Freundlich model predicts well the adsorption behaviour of dye Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate on P.putida than Langmuir model and thus chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate can be considered to have strong sorption on sewage sludge.
Another adsorption study was conducted for evaluating the adsorption capacity of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS no. 28983-56-4) on As-synthesized hollow silica microspheres (Shiquan Liu, et. al; 2017). Hollow silica microspheres with the same size and hollow structure but with micro- or mesoporous walls were used to adsorb methyl blue (MB).The pH values of the Methyl Blue solutions used in the tests was 6.57, respectively. Hollow SiO2 microspheres were synthesized in a medium with molar ratios of 1TEOS:0.17HCl:37.224H2O:0.451C8H19N. The synthesis procedures were as follows: TEOS and octylamine were mixed under stirring for 3 min. Then, mixed solution of water and hydrochloric acid was added into the above mixture. After a reaction of 60 min, the product was filtered and collected and fully dried at room temperature. 1 g of the dried sample was subjected to hydrothermal treatment in an autoclave at 100°C for 72 h. The dried sample was calcined at 550°C for 6 h. The ramping rate was 1°C/min. The as-synthesized and thermally treated samples were designated as O60 and O60T, respectively. The dispersion of the sample is good, but the uniformity is poor. The sizes of the microspheres are mostly about 75 and 145lm, and the wall thickness of the hollow spheres is estimated to be about 18–42lm, based on the measurements on different broken spheres in different images.The adsorption kinetics of methyl blue on the samples shows the opposite trend with adsorption capacities of 3.96 and 7.94 mg/g, respectively. It can be seen that the adsorption by the as-synthesized sample increases within 5–30 min; however, it only slightly increases with the adsorption time and the total adsorption at 180 min is only about 20%. In contrast, the adsorption of MB by the hydrothermally treated sample can be divided into two stages. During the initial 60 min, the adsorption rate of the sample is fast, which can be ascribed to the adsorption on the surfaces of the spheres and the pores. With further prolonging the adsorption time, the adsorption slowly increases, which suggests a slow diffusion of the dye molecules into the hollows of the microspheres. The final adsorption efficiency is 45%, more than double the adsorption by the as-synthesized sample. The total adsorption of dye methyl blue on the hydrothermally treated sample is 43.4%.Thus, based on this, it can be concluded that the chemical has a moderate sorption on silica microsphere.
On the basis of above overall results for target chemical Disodium [[4 -[bis[4 -[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5 -dien-1 -ylidene]amino]benzenesulphonate (methyl blue) (from peer reviewed journals), it can be concluded that the test substance Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate has a moderate to strong sorption.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.