Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 272-905-0 | CAS number: 68919-79-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From February 24, 2015 to March 06, 2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The study was conducted according to OECD Guideline 439 and EU Method B.46, in compliance with GLP.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 015
- Report date:
- 2015
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Fatty acids, tall-oil, reaction products with triethylenetetramine
- EC Number:
- 272-905-0
- EC Name:
- Fatty acids, tall-oil, reaction products with triethylenetetramine
- Cas Number:
- 68919-79-9
- Molecular formula:
- Not applicable for this UVCB.
- IUPAC Name:
- Fatty acids, tall-oil, reaction products with triethylenetetramine
- Test material form:
- semi-solid (amorphous): gel
- Remarks:
- migrated information: paste
Constituent 1
Test animals
- Species:
- other: EpiDerm-Kit consisting of human-derived epidermal keratinocytes, Batch no.: 21630
Test system
- Type of coverage:
- open
- Vehicle:
- other: Dulbecco’s Phosphate Buffered Saline (DPBS buffer without CaCl2 and MgCl2)
- Controls:
- other: in vitro study: Dulbecco’s Phosphate Buffered Saline (DPBS buffer without CaCl2 and MgCl2) was used as negative control. Sodium dodecyl sulphate (SDS) solution in deionised H2O containing 5% SDS was used as positive control.
- Amount / concentration applied:
- 24.1, 24.2, 24.4 mg test substance (Main test); 26.3, 26.9 mg test substance (Additional test with frozen tissues).
On average, 25 mg of the solid test substance (wetted with 25 μL DPBS-buffer) were applied to each tissue and spread to match the tissue size of 0.63 cm2 - Duration of treatment / exposure:
- 60 minutes
- Details on study design:
- Test System: The EpiDermTM tissue consists of human-derived epidermal keratinocytes which have been cultured to form a multi-layered, highly differentiated model of the human epidermis. It consists of organized basal, spinous and granular layers, and a multi-layered stratum corneum containing intercellular lamellar lipid layers arranged in patterns analogous to those found in vivo. The EpiDermTM tissues are cultured on specially prepared cell cultures inserts. Tissues were procured from MatTek In Vitro Life Science Laboratories, Bratislava.
Pre-Incubation of Tissues:
Eight 6-well-plates were prepared with 0.9 mL assay medium in three of the six wells (upper row). The tissues were inspected for viability. Viable tissues were transferred (three per plate) in the wells with the medium using sterile forceps under the clean bench and placed into the incubator at 37±1°C and 5.0±0.5% CO2 for 1 h.
After the pre-incubation (1 h), the other three wells of each plate (lower row) were filled with fresh assay medium (0.9 mL). Every tissue was transferred into a well of the lower row. All 6-well-plates were set into the incubator at 37±1°C and 5.0±0.5% CO2 for 18 h.
Treatment with test substance:
The pre-incubated tissues were placed into fresh 6-well-plates containing 0.9 mL assay medium per well, using the upper row only. One plate (three tissues) was used as negative control; each tissue was treated with 30 μL DPBS buffer, a nylon mesh was added in order to ensure sufficient contact with the tissue surface.
One plate was used as positive control; each tissue was treated with 30 μL SDS-solution, a nylon mesh was added in order to ensure sufficient contact with the tissue surface. One plate was used for treatment with the test substance:
The tissues were wetted with 25 μL DPBS buffer before applying the test substance and spreading it to match the tissue size.
Tissues were dosed in 1 min-intervals. After dosing the last tissue, all plates are transferred into the incubator for 35 min. 37±1°C and 5±0.5% CO2. 60 min. after the first application, the inserts were removed from the plates using sterile forceps and rinsed immediately in 1 min-intervals.
After rinsing, each tissue was dried with a sterile cotton tip and then transferred into a new 6-well-plate with fresh assay medium (0.9 mL). Then, the tissues were set in the incubator for 24 h.
Medium Renewal:
For three incubated tissues each, a new 6-well-plate with 0.9 mL assay medium in the upper row was prepared. The tissues were removed from the incubator and shaken for ten min (500 rpm). Then the inserts were transferred into the new 6-well-plate and set into the incubator for 18 h for post-incubation.
MTT Assay
After a total incubation time of 42 h, a 24-well-plate was prepared with 300 μL freshly prepared MTT-reagent in each well. The tissues were blotted on the bottom and then transferred into the 24-well-plate. Then the 24-well-plate was set into the incubator for 3 h. After this time, the MTT reagent was aspirated and replaced by DPBS buffer. This was then aspirated, too, and replaced several times. At last, each insert was thoroughly dried and set into the empty, pre-warmed 24-well-plate. Into each well, 2 mL isopropanol were pipetted, taking care to reach the upper rim of the insert. The plate was then shaken for 2 h at room temperature. After 2 h, the inserts in which formazan had been produced were pierced with an injection needle, taking care that all colour was extracted. The inserts were then discarded and the content of each well was thoroughly mixed in order to achieve homogenisation. From each well, two replicates with 200 μL solution (each) were pipetted into a 96-wellplate which was read in a plate spectral photometer at 570 nm.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- other: other: Relative absorbance value (percent)
- Value:
- 97.9
- Remarks on result:
- other:
- Remarks:
- Basis: mean (in comparison to the negative control). Time point: 60 min. Remarks: Value was well above the threshold value for irritation potential (50%) . (migrated information)
In vivo
- Irritant / corrosive response data:
- After the treatment, the relative absorbance values were reduced to 97.9%. This value is well above the threshold value for skin irritation (50%).
The optical density of the negative control was well within the required acceptability criterion of 0.8 ≤ mean OD ≤ 2.8 with an OD value of 2.3. The positive control induced a decrease in the relative absorbance as compared to the negative control to 2.8% (required: ≤20%) for thus ensuring the validity of the test system. Variation within replicates was within the accepted range for negative control, positive control and test substance (< 18%). For these reasons, the result of the test is considered valid.
Any other information on results incl. tables
Table 1: Corrected Mean Absorption Values of Test Substance
Designation |
Test substance |
Mean – blank (tissue 1) |
2.256 |
Mean – blank (tissue 2) |
2.121 |
Mean – blank (tissue 3) |
2.230 |
Mean of the three tissues |
2.202 |
Relative standard deviation of the three tissues |
3.3% |
Comparison of Formazan Production
For the test substance and the positive control, the following percentage values of formazan production were calculated in comparison to the negative control:
Table 2: Percent Formazan Production
Designation |
Test substance |
Positive control |
Percent formazan production (tissue 1) |
100.3% |
2.8% |
Percent formazan production (tissue 2) |
94.3% |
2.8% |
Percent formazan production (tissue 3) |
99.1% |
2.9% |
Percent formazan production (mean) |
97.9% |
2.8% |
Applicant's summary and conclusion
- Conclusions:
- The test substance was considered as not irritating to the skin.
- Executive summary:
An in vitro study was conducted to assess the skin irritation potential of the test substance according to OECD Guideline 439 and EU Method B.46, in compliance with GLP. Three tissues of a human skin model EpiDermTM were exposed for 60 minutes. On average, 25 mg of the test substance (wetted with 25 μL DPBS-buffer) were applied to each tissue and spread to match the tissue size (0.63 cm2). DPBS buffer was used as negative control and 5% SDS solution as positive control. After treatment with the negative control, the absorbance values were within the required acceptability criterion of 0.8 ≤ mean OD ≤ 2.8, with an OD value of 2.3. The positive control showed clear irritating effects with a relative absorbance value reduced to 2.8%. Variation within tissues was acceptable (< 18%). The relative absorbance value representing the test substance was reduced to 97.9%. This value is well above the threshold for irritation potential (50%). Therefore, under the study conditions, the test substance is considered as not irritating to the skin in a Human Epidermis Skin Model Test (Andres I, 2015a).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.