Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 432-080-1 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 28 October 1998 to 18 November 1998
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Deviations:
- no
- GLP compliance:
- yes
- Radiolabelling:
- no
- Analytical monitoring:
- yes
- Details on sampling:
- Method (HPLC)
HPLC equipment: Spectra-Physics SP 8800 with autosampler SP 8875 and Peltier column oven CO 200
Detector: UV/VIS detector Spectra-Physics: Spectra 200 (SC 200)
Column: Material: stainless steel dimensions: 250 x 4,6 mm by Bischcrf (No. 08087A08) using a guard column
stationary phase: Hypersil ODS, 5μm column temperature: 30°C
Mobile Phase: A: NH4H2P04 in water (c=0.005 mole/l)
B: A/acetonitrile 50/50 (v/v)
Gradient:
Time (min) %A % B
0 100 0
13 0 100
18 100 0
25 100 0
Flow rate: 1.0 ml/min
Injected volume: 20 μl
Detection wavelength: 480 nm - Buffers:
- pH4: 20.402 g (0.1 mole) potassium hydrogen phthalate were dissolved in 1000 ml distilled water. 4 ml of sodium hydroxide (0.1 mole/I) were added to 500 ml of this solution and filled up to a volume of 1000 ml with distilled water. The solution was adjusted to pH 4.0 with sodium hydroxide or hydrochloric acid. After decocting it was adjusted to pH 4 for each hydrolysis temperature.
pH7: 13.61 g potassium dihydrogen phosphate were dissolved in 1000 ml distilled water. 29.63 ml of sodium hydroxide (1 mole/l) were added to 500 ml of this solution and filled up to a volume of 1000 ml with distilled water. The solution was adjusted to pH 7.0 with sodium hydroxide or hydrochloric acid. After decocting it was adjusted to pH 7 for each hydrolysis temperature.
pH9: 7.46 g of potassium chloride and 6.184 g of boric acid were dissolved in 1000 ml water. 500 ml of this solution were added to 21.3 ml sodium hydroxide (1 mole/I) and filled up to a volume of 1000 ml with water. The solution was adjusted to pH 9.0 with sodium hydroxide or hydrochloric acid. After decocting it was adjusted to pH 9 for each hydrolysis temperature. - Details on test conditions:
- Choice of Concentration
The optimal concentration of the test substance required for the analysis is about 144 to 188 mg/l. This value is less than half the solubility in water (project: EO 044-98) and thus satisfies the requirements of the guidelines.
Preparation of Test Samples
Solutions of the test substance were prepared by weighing between 7 and 10 mg of the test substance in a 50 mi volumetric flask and dissolving in the relevant buffer. The resulting solution was subjected immediately to the hydrolysis procedure.
Preparation of the Standards
The calculation standards were freshly prepared by weighing between 7 and 9 mg of the standard test substance in a 50 ml volumetric flask and dissolving in the buffer pH 4 and pH 7.
Hydrolysis Test Procedure
The flask containing the hydrolysis mixture was placed in a thermostatically controlled water bath at the selected temperature for the specified time. Thereafter it was cooled immediately. The pH was controlled. The HPLC analysis of the unhydrolysed test substance (main compound) was performed without any delay. - Duration:
- 163.75 h
- pH:
- 4
- Temp.:
- 50
- Initial conc. measured:
- 158.2 mg/L
- Duration:
- 89.2 h
- pH:
- 4
- Temp.:
- 60
- Initial conc. measured:
- 169.12 mg/L
- Duration:
- 40.22 h
- pH:
- 4
- Temp.:
- 70
- Initial conc. measured:
- 170.44 mg/L
- Duration:
- 4.43 h
- pH:
- 7
- Temp.:
- 50
- Initial conc. measured:
- 173.2 mg/L
- Duration:
- 25 h
- pH:
- 7
- Temp.:
- 35
- Initial conc. measured:
- 144.08 mg/L
- Number of replicates:
- One
- Positive controls:
- no
- Negative controls:
- no
- Statistical methods:
- The initial concentrations (c(0)) of the test substance were calculated from the sample weights. The concentrations during the test process (c(t)) were calculated from the HPLC peak areas of the main component using the formula:
c(t)= c(Standard) . Peak Area (Sample) / Peak Area (Standard) - Preliminary study:
- The decomposition at pH 9 is higher than 50 % after 2.4 hours at 50°C. Thus the test substance may by be considered hydrolytically instable at pH 9. According to the guideline a half-life period of less than one day under environmental conditions (25°C) may be estimated.
The pretests at pH 4 and at pH 7 indicate that an examination of the hydrolysis kinetics is essential. - Test performance:
- The test performed within the required test parameters specified by the guideline.
- Transformation products:
- not measured
- Details on hydrolysis and appearance of transformation product(s):
- Not measured.
- pH:
- 4
- Temp.:
- 25 °C
- DT50:
- 65.5 d
- pH:
- 7
- Temp.:
- 25 °C
- DT50:
- 2.7 d
- pH:
- 9
- Temp.:
- 25 °C
- DT50:
- < 1 d
- Remarks on result:
- other: Estimated
- Details on results:
- Test 1
at pH 4 showed a linear relationship between log(c(t)/c(0)) and t (correlation: r = 0.9856)
at pH 7 showed a linear relationship between log(c(t)/c(0)) and t (correlation: r = 1.0000)
showed a hydrolysis kinetics of first order for both pH values. With accordance to the quoted guideline test 3 was performed using test temperatures of 60 °C and 70 °C for pH 4 and 35 °C for pH 7, respectively.
Test 3
at pH 4 and 60°C showed a linear relationship between log(c(t)/c(0)) and t (correlation: r =1.0000).
at pH 4 and 70°C showed a linear relationship between log(c(t)/c(0)) and t (correlation; r = 0.9959).
at pH 7 and 35⁰C showed a linear relationship between fog(c(t)/c(0)) and t (correlation; r = 0.9994).
In order to estimate the half-life period of the test substance at room temperature for pH 4 and/an extrapolation according to the Arrhenius equation was performed for both pH-values - Validity criteria fulfilled:
- yes
- Conclusions:
- At pH 4 the half-life period was determined by extrapolating the results of the experiments at 50 ⁰C, 60⁰C and 70 ⁰C to a temperature of 25⁰C. It was found to be 65.5 days.
At pH 7 the half-life period was determined by extrapolating the results of the experiments at 50⁰C and 35 ⁰C to a temperature of 25°C. It was found to be 2.7 days.
At pH s the decomposition is higher than 50 % after 2.4 hours at 50⁰C. Thus the test substance may by be considered hydrolytically instable at pH 9, According to the guideline a half-life period of less than one day under environmental conditions (25°C) may be estimated. - Executive summary:
The objective of this study was the determination of the abiotic degradation of the test substance Reactive Orange DYPR1410 (the main compound), i.e. the determination of the hydrolysis rate as a function of the pH-value according to guideline 92/69/EEC. appendix, C7. Study performed in accordance with the Principles of Good Laboratory Practice (GLP).
At pH 4 the half-life period was determined by extrapolating the results of the experiments at 50 ⁰C, 60⁰C and 70 ⁰C to a temperature of 25⁰C. It was found to be 65.5 days.
At pH 7 the half-life period was determined by extrapolating the results of the experiments at 50⁰C and 35 ⁰C to a temperature of 25°C. It was found to be 2.7 days.
At pH s the decomposition is higher than 50 % after 2.4 hours at 50⁰C. Thus the test substance may by be considered hydrolytically instable at pH 9, According to the guideline a half-life period of less than one day under environmental conditions (25°C) may be estimated.
Reference
Summary and extrapolation of the results at pH 4
Temperature |
t½(by regression) |
Experiment |
50⁰C |
155.26 h |
test 1 |
60⁰C |
60.82 h |
test 3 |
70⁰C |
30.45 h |
test 3 |
25⁰C |
1572 h = 65.5 d |
extrapolation |
Summary and extrapolation of the results at pH 7
Temperature |
t½(by regression) |
Experiment |
50⁰C |
2.99 h |
test 1 |
35⁰C |
17.72 h |
test 3 |
25⁰C |
64.0 h = 2.7 d |
extrapolation |
Description of key information
At pH 7 the half-life period was determined by extrapolating the results of the experiments at 50⁰C and 35 ⁰C to a temperature of 25°C. It was found to be 2.7 days.
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 2.7 d
- at the temperature of:
- 25 °C
Additional information
At pH 4 the half-life period was determined by extrapolating the results of the experiments at 50 ⁰C, 60⁰C and 70 ⁰C to a temperature of 25⁰C. It was found to be 65.5 days.
At pH 7 the half-life period was determined by extrapolating the results of the experiments at 50⁰C and 35 ⁰C to a temperature of 25°C. It was found to be 2.7 days.
At pH 9 the decomposition is higher than 50 % after 2.4 hours at 50⁰C. Thus the test substance may by be considered hydrolytically instable at pH 9, According to the guideline a half-life period of less than one day under environmental conditions (25°C) may be estimated.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.