Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

GENERAL INFORMATION

- When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.

- After inhalation: Supply fresh air; consult doctor in case of complaints.

- After skin contact: Wash with plenty of soap and water.

- After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

- After swallowing: If swallowed, rinse mouth with water (only if the person is conscious), drink plenty of water and provide fresh air. If symptoms persist consult doctor.

- Most important symptoms and effects, both acute and delayed: No further relevant information available.

- Indication of any immediate medical attention and special treatment needed: No further relevant information available.

Fire-fighting measures

EXTINGUISHING MEDIA

- Suitable extinguishing agents: The product is not flammable. Use fire extinguishing methods suitable to surrounding conditions.

- Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in case of fire.

ADVICE FOR FIREFIGHTERS

- Protective equipment: Do not inhale explosion gases or combustion gases.

- Additional information: Dispose of fire debris and contaminated firefighting water in accordance with official regulations.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES

- Wear protective clothing, ensure adequate ventilation and avoid formation of dust.

ENVIRONMENTAL PRECAUTIONS:

- Damp down dust with water spray. Do not allow to enter sewers/ surface or ground water.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING

- Pick up mechanically and avoid the formation of dust. Send for recovery or disposal in suitable receptacles. Dispose of the material collected according to regulations.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING: Provide appropriate exhaust ventilation at places where dust is formed.

CONDITIONS FOR SAFE STORAGE: Store material in a tightly sealed container.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not dangerous goods
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

PERSONAL PROTECTIVE EQUIPMENT AND GENERAL HYGIENIC MEASURES

- The usual precautionary measures are to be adhered to when handling chemicals. Do not inhale dust / smoke / mist, Avoid contact with the eyes and skin, wash hands before breaks and at the end of work and use skin protection cream for skin protection.

- Respiratory protection: Not necessary if room is well-ventilated. Use suitable respiratory protective device when high concentrations are present.

- Recommended filter device for short term use: Filter P1 and Filter FFP1

- Protection of hands: Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation: Butyl rubber (BR), Fluorocarbon rubber (Vitron), Nitrile rubber (NBR), Natural rubber (NR) and Chloroprene rubber (CR). Value for the permeation: Level ≥ 120 min. (EN 374), the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

- Eye protection: Safety glasses.

- Body protection: Protective work clothing

Stability and reactivity

CHEMICAL STABILITY

- Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.

- Possibility of hazardous reactions: Reacts with acids.

- Conditions to avoid: Keep away from acids.

- Incompatible materials: Keep away from acids.

- No dangerous decomposition products known.

Disposal considerations

WASTE TREATMENT METHODS

- Recommendation: Contact manufacturer for recycling information. Disposal must be made according to official regulations.

- Uncleaned packaging recommendation: Empty contaminated packaging thoroughly. They may be recycled after thorough and proper cleaning. Packaging that may not be cleaned is to be disposed of in the same manner as the product.