Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-513-6 | CAS number: 583-60-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Study Initiation Date: 29 October 2019
Experimental Starting Date: 14 November 2019
Experimental Completion Date: 06 December 2019 - Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 020
- Report date:
- 2020
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Version / remarks:
- Final
- Deviations:
- no
- Remarks:
- There were no deviations from the study plan.
- GLP compliance:
- yes
Test material
- Reference substance name:
- 2-methylcyclohexanone
- EC Number:
- 209-513-6
- EC Name:
- 2-methylcyclohexanone
- Cas Number:
- 583-60-8
- Molecular formula:
- C7H12O
- IUPAC Name:
- 2-methylcyclohexan-1-one
- Reference substance name:
- Water
- EC Number:
- 231-791-2
- EC Name:
- Water
- Cas Number:
- 7732-18-5
- Molecular formula:
- H2O
- IUPAC Name:
- water
- Reference substance name:
- Unknown impurities
- Molecular formula:
- not applicable
- IUPAC Name:
- Unknown impurities
- Test material form:
- liquid
- Details on test material:
- Batch No.: 01246M0002, purity confirmed by analytical certificate
Constituent 1
impurity 1
impurity 2
- Specific details on test material used for the study:
- Prior to treatment, all EpiDerm™ tissues were gently blotted to remove moisture. The test item was applied undiluted. 30 µL (47 µL/cm2) of the test item were dispensed directly atop the EpiDerm™ tissue. The test item was gently spread to match size of the tissue using a bulb-headed Pasteur pipette.
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Justification for test system used:
- This test uses the EpiDerm™ reconstructed human epidermis model (MatTek) which consists of normal human epidermal keratinocytes (NHEK) and therefore represents in vitro the target organ of the species of interest and closely mimics the biochemical and physiological properties of the upper parts of the human skin, i.e. the epidermis.
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- The test was carried out with the reconstituted three-dimensional human skin model EpiDerm™
(MatTek). This skin model consists of normal human epidermal keratinocytes (NHEK) which have
been cultured to form a multilayered, highly differentiated model of the human epidermis. The NHEK are cultured on chemically modified, collagen-coated cell culture inserts (MillicellR). The EpiDerm™ epidermis model exhibits in vivo-like morphological and growth characteristics which are uniform and highly reproducible. It consists of organised basal, spinous and granular layers and a multi-layered stratum corneum analogous to patterns found in vivo. - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- The test item was applied undiluted. 30 µL (47 µL/cm2) of the test item were dispensed directly atop the EpiDerm tissue.
- Duration of treatment / exposure:
- 60 min
- Duration of post-treatment incubation (if applicable):
- All plates were incubated for 25 ± 1 min under the sterile flow and for the remaining time of 35 ± 1 min transferred to the incubator. Then the tissues were washed by filling and emptying the inserts 15 times with DPBS using a constant stream in about 1.5 cm distance from the tissue surface, this process also occurred sequentially, in one-minute intervals. Subsequently, the inserts were completely submerged 3 times in 150 mL DPBS and shaken to remove rests of the test item. Finally, the inserts were rinsed once from the inside and the outside with sterile DPBS. Excess DPBS was removed by blotting the bottom with blotting paper. The inserts were placed in prepared new 6-well plates containing 0.9 mL pre-warmed fresh assay medium per well and the tissue surface was dried using a sterile cotton tip. The plates were post-incubated at 37 ± 1 °C, 5.0% CO2, humidified to 95%, for 24 ± 2 h. Following this incubation the tissues were transferred to new wells containing 0.9 mL fresh assay medium and incubated for additional 18 ± 2 h. After this post-incubation period the bottom of the inserts were blotted on sterile blotting paper and the inserts were transferred in a 24-well plate containing 300 µL pre-warmed MTT medium.
This plate was incubated for 3 h ± 5 min at 37 ± 1 °C, 5.0% CO2, humidified to 95%.
After the MTT incubation, the tissues were rinsed 3 times with DPBS and afterwards placed on blotting paper to dry. The tissues were transferred into 12-well plates and immersed in 2 mL isopropanol, sealed to inhibit evaporation. Extraction was carried out protected from light at room temperature for at least 2 h with gentle shaking on a plate shaker.
Before using the extracts, the plate had been shaken for 15 min and the inserts were pierced with an injection needle.The extract was pipetted up and down 3 times before 2 x 200 µL aliquots per each tissue were transferred into a 96-well plate.OD was measured at 570 nm in a plate
spectrophotometer using isopropanol as a blank - Number of replicates:
- The test was performed on a total of 3 tissues per dose group.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- % tissue viability
- Value:
- 4.1
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- positive indication of irritation
- Remarks:
- Irritant potential of the test item was predicted from the relative mean tissue viabilities obtained compared to the corresponding negative control tissues concurrently treated with DPBS. The test item showed irritant effects.
Any other information on results incl. tables
Pre-Experiments
The mixture of 30 µL test item per 1 mL MTT medium showed no reduction of MTT compared to the
solvent. The mixture did not turn blue/purple. Therefore, NSMTT equalled 0%.
The mixture of 30 µL of the test item per 300 µl aqua dest. and/ per 300 µL isopropanol showed no
colouring detectable by unaided eye-assessment. Therefore, NSC equalled 0%.
The test item showed no non-specific reduction of MTT and no relevant colouring potential after
mixture with aqua dest. and with isopropanol. Therefore, no additional controls for correction of
possible false-negative results were necessary.
Table 1. Result of the Test Item 2-MCH
Name | Negative Control | Positive Control
| Test Item | ||||||||||||
Replicate Tissue | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | ||||||
Absolute OD570 | 1.316 | 1.328 | 1.317 | 0.096 | 0.097 | 0.095 | 0.093 | 0.094 | 0.096 | ||||||
1.312 | 1.315 | 1.315 | 0.094 | 0.097 | 0.100 | 0.097 | 0.101 | 0.103 | |||||||
Mean Absolute OD570 |
1.317**** |
0.097 |
0.097 | ||||||||||||
OD570 – (Blank Corrected) | 1.271 | 1.282 | 1.271 | 0.050 | 0.051 | 0.050 | 0.048 | 0.049 | 0.051 | ||||||
1.266 | 1.270 | 1.270 | 0.049 | 0.051 | 0.055 | 0.051 | 0.055 | 0.057 | |||||||
Mean OD570 of the Duplicates (Blank Corrected) |
1.268 |
1.276 |
1.270 |
0.049 |
0.051 |
0.052 |
0.050 |
0.052 |
0.054 | ||||||
Total Mean OD570 of the 3 Replicate Tissues (Blank Corrected) |
1.271* |
0.051 |
0.052 | ||||||||||||
SD of Mean OD570 of the 3 Replicate Tissues (Blank Corrected) |
0.004 |
0.002 |
0.002 | ||||||||||||
Relative Tissue Viability [%] |
99.8 |
100.3 |
99.9 |
3.9 |
4.0 |
4.1 |
3.9 |
4.1 |
4.2 | ||||||
Mean Relative Tissue Viability [%] |
100.0 |
4.0** |
4.1 | ||||||||||||
SD of Relative Tissue Viability [%]*** |
0.3 |
0.1 |
0.2 | ||||||||||||
CV [% Viabilities] | 0.3 | 3.0 | 4.3 |
*
Blank-corrected mean OD570 of the negative control corresponds to 100% absolute tissue viability.
**
Mean relative tissue viability of the three positive control tissues is ≤ 20%.
***
Standard deviation (SD) obtained from the three concurrently tested tissues is ≤ 18%.
****
The mean absolute OD570 of the negative control is ≥ 0.8 and ≤ 2.8.
Applicant's summary and conclusion
- Interpretation of results:
- Category 2 (irritant) based on GHS criteria
- Conclusions:
- In this study under the given conditions the test item showed irritant effects. The test item is therefore classified as “irritant” in accordance with UN GHS “Category 2”.
- Executive summary:
In the present study the skin irritant potential of 2-MCH was analysed. The EpiDerm™-Standard Model (EPI-200™), a reconstituted three-dimensional human epidermis model, was used as a replacement for the Draize Skin Irritation Test (OECD TG 404, [7]) to distinguish between UN GHS “Category 2” skin irritating test substances and not categorized test substances (“No Category”) which may be considered as non-irritant. Hereby, the test item was applied topically. Cytotoxicity is expressed as the reduction of mitochondrial dehydrogenase activity measured by formazan production from MTT after a 60 min exposure and 42 h post-incubation period and compared to those of the concurrent negative controls.
The mixture of 30 µL test item per 1 mL MTT medium showed no reduction of MTT compared to the solvent. The mixture did not turn blue/purple. Therefore, NSMTT equalled 0%.
The mixture of 30 µL of the test item per 300 µl aqua dest. and/ per 300 µL isopropanol showed no colouring detectable by unaided eye-assessment. Therefore, NSC equalled 0%.
The test item showed no non-specific reduction of MTT and no relevant colouring potential after mixture with aqua dest. and with isopropanol. Therefore, no additional controls for correction of possible false-negative results were necessary.
The test item showed irritant effects. The mean relative tissue viability (% negative control) was ≤ 50% (4.1%) after 60 min treatment and 42 h post-incubation.Name
Negative Control
Positive Control
Test Item
Replicate Tissue
1
2
3
1
2
3
1
2
3
Absolute OD570
1.316
1.328
1.317
0.096
0.097
0.095
0.093
0.094
0.096
1.312
1.315
1.315
0.094
0.097
0.100
0.097
0.101
0.103
Mean Absolute OD570
1 317****
0.097
0.097
OD570 (Blank Corrected)
1.271
1.282
1.271
0.050
0.051
0.050
0.048
0.049
0.051
1.266
1.270
1.270
0.049
0.051
0.055
0.051
0.055
0.057
Mean OD570 of the
Duplicates
(Blank Corrected)1.268
1.276
1.270
0.049
0.051
0.052
0.050
0.052
0.054
Total Mean OD570 of the
3 Replicate Tissues
(Blank Corrected)1.271*
0.051
0.052
SD of Mean OD570 of the
3 Replicate Tissues
(Blank Corrected)0.004
0.002
0.002
Relative Tissue Viability
[%]99.8
100.3
99.9
3.9
4.0
4.1
3.9
4.1
4.2
Mean Relative Tissue
Viability [%]100.0
4.0**
4.1
SD of Relative Tissue
Viability [%]***0.3
0.1
0.2
CV [% Viabilities]
0.3
3.0
4.3
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.