Registration Dossier

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
experimental study
Adequacy of study:
key study
Study period:
9-10 March 1999
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
EU Method A.4 (Vapour Pressure)
Version / remarks:
Directive 92/69/EEC
Deviations:
no
GLP compliance:
yes (incl. certificate)
Type of method:
effusion method: vapour pressure balance
Key result
Temp.:
25 °C
Vapour pressure:
0 Pa
Remarks on result:
other: Estimated vapour pressure value.

The table below contains the summary of results from measuring Vapour Pressure in the 3 runs of the test.

 Run  Log10[VP(25C)]
 1  - 4.032
 2  - 3.912
 3  - 3.910
 Mean  - 3.951
 Vapour pressure  0.00011 Pa

The test material did not change in appearance under the conditions used in the determination.

Detailed results from measurement of VP as a function of temperature can be found in the attached document.

Conclusions:
The vapour pressure of BMS 214702-01 has been determined to be 1.1 x 10^(-4) Pa at 25 C.
The substance is not considered to be volatile.
Executive summary:

The test procedure was based on Method A4 specified in Commission Directive 92/69/EEC (which constitutes Annex V of Council Directive 67/548/EEC).

BMS 214702-01 has been determined to have a vapour pressure of 1.1 x 10^(-4) Pa at 25 C using a vapour pressure balance.

Description of key information

The test procedure was based on Method A4 specified in Commission Directive 92/69/EEC (which constitutes Annex V of Council Directive 67/548/EEC). BMS 214702-01 has been determined to have a vapour pressure of 1.1 x 10^(-4) Pa at 25 C using a vapour pressure balance.

Key value for chemical safety assessment

Vapour pressure:
0 Pa
at the temperature of:
25 °C

Additional information