Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 257-111-4 | CAS number: 51287-84-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Not specified
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- Restriction: No analytical confirmation of exposure concentrations.
- Reason / purpose for cross-reference:
- other: read-across target
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes
- Analytical monitoring:
- no
- Details on sampling:
- not applicable
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: A single 1,000 mg/L WAF was formulated by combining 0.5 g of test material and 500 mL of dilution water in a glass mixing vessel equipped with a magnetic stirrer (the vortex extended approximately 25% of the distance from the surface to the bottom of the mixing vessel). The mixture was stirred for approximately 24 hours and allowed to settle for approximately 1 hour. Following the settling period the water phase containing the WAF was removed from the mixing vessel with a siphon using care to exclude any material on the surface, bottom, or sides of the mixing vessel. Test media was prepared at 0.10, 1.0, 10, 100, and 1,000 mg/L by combining the appropriate volume of the 1,000 mg/L WAF and dilution water.
- Controls: Dilution water control
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): None
- Concentration of vehicle in test medium (stock solution and final test solution(s) including control(s)): Dilution control, 1.10, 1.0, 10, 100, and 1,000 mg/L.
- Evidence of undissolved material (e.g. precipitate, surface film, etc): The 1,000 mg/L WAF was cloudy throughout the test. No other insoluble material was observed during the test. - Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Green algae
- Strain: Selenastrum capricornutum
- Source (laboratory, culture collection): University of Texas at Austin and delivered to T.R. Wilbury on April 11, 1995.
- Age of inoculum (at test initiation): The inoculum used for the test was from a single source that had been growing for 8 days prior to testing.
- Method of cultivation: No data
ACCLIMATION
- Acclimation period: Approximately 14 days
- Culturing media and conditions: same as test media.
- Any deformed or abnormal cells observed: No - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 96 h
- Post exposure observation period:
- not applicable
- Hardness:
- no data
- Test temperature:
- 24.0°C at test initiation to 23.9°C at test termination
- pH:
- 7.3 - 10.2
- Dissolved oxygen:
- no data
- Salinity:
- no data
- Nominal and measured concentrations:
- nominal: 0.10, 1.0, 10, 100 and 1000 mg/L
- Details on test conditions:
- TEST SYSTEM
- Test vessel: 125 500 mL glass Erlenmeyer flasks
- Type: open
- Fill volume: less than 50 % of vessel volume
- Aeration: Rotary shaker adjusted to 100 ppm in an incubator
- Type of flow-through: Static
- Renewal rate of test solution: None
- Initial cells density: 10, 000 cells/mL
- Control end cells density: 1,804,000 cells/mL
- No. of organisms per vessel: 10,000 cells/mL
- No. of vessels per concentration (replicates): 2 Replicates
- No. of vessels per control (replicates): 2 Replicates
- No. of vessels per vehicle control (replicates): None
GROWTH MEDIUM
- Standard medium used: Yes, sterile enriched media identical to media used for this test and maintained at test conditions for at lest 14 days before the definitive test. The inoculum used for the test was from a single source that had been growing for 8 days prior to testing.
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Water used for acclimation of test organisms and for all toxicity testing was sterile enriched media with a pH of 7.5. Dilution water was analysed for particulate matter at the start of the test and media from a control vessel was analysed for particulate matter at the end of the test.
- Total organic carbon: non detect
- Particulate matter: non detect at 0-hr; 33 mg/L at 96-hr
- Metals: all non detect; iron 0.03 mg/L
- Pesticides: non detect
- Chlorine: non detect
- Alkalinity: no data
- Ca/mg ratio: no data
- Conductivity: NA
- Culture medium different from test medium: No
- Intervals of water quality measurement: Start and end of test.
OTHER TEST CONDITIONS
- Sterile test conditions: Yes
- Adjustment of pH: No
- Photoperiod: 24 hour’s light
- Light intensity and quality: Approximately 400 foot-candles
- Salinity (for marine algae): NA
EFFECT PARAMETERS MEASURED: Growth rate
- Calculations and Statistical Methods: The average specific growth rate was calculated as the natural log of the number of cells/mL at 72 and 96 hours minus the natural log of the number of cells/ml at 0 hours divided by the exposure period. The percent change from the control was calculated by subtracting the treatment average specific growth rate from the control average specific growth rate, dividing the difference by the average specific growth rate in the control, and multiplying that value by 100. The EC50 and NOEC values were calculated using nominal concentrations of test substance, when warranted. The values were computed twice, once using the average number of cells/mL at each concentration expressed as a percent of the control and a second time using the average specific growth rate expressed as the percent change from the control. The binomial/nonlinear interpolation method (Stephan, 1983) was used to calculate EC50 values. The slope of the 96-hour dose response curve (cell density) was computed using the probit method. The no observed effect concentration (NOEC) is the highest concentration of test substance that allowed cell growth equal to at least 90% of the control growth.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: Each concentration approximately 10 % of the next higher concentration.
- Range finding study
- Test concentrations: 1.10, 1.0, 10, 100, 1,000 mg/L - Reference substance (positive control):
- no
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 270 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 120 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: cell density
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: cell density
- Details on results:
- - Exponential growth in the control (for algal test): Yes
- Observation of abnormalities (for algal test): No
- Unusual cell shape: No
- Colour differences: No
- Flocculation: No
- Adherence to test vessels: No
- Aggregation of algal cells: No
- Other: After 120 hours, examination of the media from the flask containing a 0.50 mL subsample of test media from the flask containing the 1,000 mg/L Alkyltin MA WAF and 50 mL of fresh media contained 472,000 algal cells/mL, indicating that the effect of the test material at the concentration was algistatic.
- Any stimulation of growth found in any treatment: No
- Any observations (e.g. precipitation) that might cause a difference between measured and nominal values: The 1,000 mg/L WAF was cloudy throughout the test. No other insoluble material was observed during the test.
- Effect concentrations exceeding solubility of substance in test medium: greater than 1,000 mg/L - Results with reference substance (positive control):
- not applicable
- Reported statistics and error estimates:
- Data were evaluated using the binomial/non-linear interpolation method (Stephan 1983). The slope of the 96-h dose response curve (cell density) was computed using the probit methd. The NOEC was defined as the highest concentration tested that allowed cell growth equal to at least 90% of the control growth.
- Validity criteria fulfilled:
- yes
- Conclusions:
- Exposure of the freshwater alga, Selenstrum capricornutum, to the test material resulted in a 72-h EC50 based on growth rate of 270 mg/L and a 72-h NOEC based on growth rate of 10 mg/L .
- Executive summary:
The toxicity of the test material to the freshwater alga, Selenastrum capricornutum, was investigated in a study which was conducted in accordance with the standardised guideline OECD 201, under GLP conditions. The test was performed under static conditions with the WAF of 0.10, 1.0, 10, 100 and 1000 mg/L mixtures of test material and water. Cell counts were made at 0, 72 and 96 hours with a haemocytometer.
A 72-h EC50 based on the growth rate was determined to be 270 mg/L with a no observed effect concentration at 72-h of 10 mg/L based on growth rate.
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- supporting study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Study conducted on read-across material
- Justification for type of information:
- Read-across to structurally similar substance DMTE (Dimethyltin bis (2-ethylhexyl thioglycolate) CAS 57583-35-4), see attached justification.
- Reason / purpose for cross-reference:
- read-across source
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 270 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 120 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: cell density
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: cell density
Referenceopen allclose all
Mean cell growth data (number of cells/ml x 10^3) at 72 hours, by nominal concentration of the WAF tested:
Control (0 mg/L): 838 (72 h)
0.10 mg/L: 811 (72 h)
1.0 mg/L: 822 (72 h)
10 mg/L: 803 (72 h) 100 mg/L: 465 (72 h)
1000 mg/L: <13 (72 h)
Average specific growth rate at 72 hours, by nominal concentration of the WAF tested:
Control (0 mg/L): 0.062 (72 h)
0.10 mg/L: 0.061 (72 h)
1.0 mg/L: 0.061 (72 h)
10 mg/L: 0.061 (72 h)
100 mg/L: 0.053 (72 h)
1000 mg/L: 0.004 (72 h)
Description of key information
Read-across to structurally similar substance DMTE (Dimethyltin bis (2-ethylhexyl thioglycolate) CAS 57583 -35 -4)
A 72-h EC50 based on the growth rate was determined to be 270 mg/L with a no observed effect concentration at 72-h of 10 mg/L based on growth rate.
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 270 mg/L
- EC10 or NOEC for freshwater algae:
- 10 mg/L
Additional information
Read-across to structurally similar substance DMTE (Dimethyltin bis (2-ethylhexyl thioglycolate) CAS 57583 -35 -4)
The toxicity of the test material to the freshwater alga, Selenastrum capricornutum, was investigated in a study which was conducted in accordance with the standardised guideline OECD 201, under GLP conditions. The study was awarded a reliability score of 2 in accordance with the criteria set forth by Klimisch et al. (1997).
The test was performed under static conditions with the WAF of 0.10, 1.0, 10, 100 and 1000 mg/L mixtures of test material and water. Cell counts were made at 0, 72 and 96 hours with a haemocytometer.
A 72-h EC50 based on the growth rate was determined to be 270 mg/L with a no observed effect concentration at 72-h of 10 mg/L based on growth rate.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.