Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Not considered to be a direct inhalation hazard, but if
vapour is inhaled, move to area of fresh air and give
artificial respiration if breathing has stopped. If there
are signs of discomfort, seek medical advice. Show copy of
safety data sheet or label to medical staff.
Emergency measure - Eyes: Rinse immediately with large volumes of water for 10 - 15
minutes. Seek medical attention. Show copy of safety data
sheet or label to the medical staff.
Emergency measure - Skin: Wash with water and mild soap or detergent. If signs of
discomfort, seek medical attention. Remove contaminated
clothing and wash thoroughly before re-use.
Emergency measure - Ingestion: Drink plenty of water. If signs of discomfort, seek medical
advice. Show copy of safety data sheet or label to medical
staff.

Fire-fighting measures

Recommended extinguishing agent: Dry foam, powder, water spray, carbon dioxide and other
extinguishing agents. No adverse reaction with normal
extinguishing agents is known.

Product arising from burning: Complete combustion will lead to the formation of oxides of
carbon, phosphorus derivatives and water. Reduced forms of
these oxides (eg. carbon monoxide) may result from
combustion in enclosed spaces. Other possible combustion
products following incomplete oxidation may include
phosphorus acids and other volatile carbon/phosphorus
products.

Product determined by test: N

Protective equipment: Breathing apparatus, suitable gloves, goggles and face
protection.

Accidental release measures

Emergency measures in case of spillage: The substance may exist as a solid or liquid under normal
environmental conditions (melting point approximately 15°C).
Absorb liquid material onto sand, sawdust or other
absorbent materials or collect solid material and place in
suitably labelled containers. Dispose of in accordance with
local regulations. Residues and minor spills may be washed
with water to process sewer, if permitted under local or
national regulations.


Protective clothing including suitable gloves and eye
protection should be worn.

Handling and storage

Handling: As the substance is a liquid, personal protective equipment
such as rubber gloves, eye/face protection and coveralls
should be worn when handling the substance to minimise
contact. In an enclosed area (confined
space),self-contained breathing apparatus should also be
worn as necessary.


Although the substance has a measurable vapour pressure
there is not considered to be significant risk of
inhalation. However, suitable ventilation should be applied
to the working area.

Storage: Store dry under ambient conditions in polyethylene-lined
steel drums. Ensure containers are properly labelled.

Packaging of the substance and or preparation: SQ 28,303 is packed in UN approved polyethylene lined steel
drums, containing 237 kg maximum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: Not regulated for shipping
Transport: The substance is not considered to be flammable or
corrosive.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Avoid contact with strong oxidising and reducing agents.

Chemical reaction with water: There is not considered to be any adverse reaction with
water.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance is consumed during use and there is no
opportunity for recovery or recycling.


Waste solvent from production is sent for recycling.

Industry - Possibility of neutralisation: If in aqueous solution, raising the pH will reduce the
irritation effects to eyes.

Industry - Possibility of destruction: controlled discharge: Trace quantites are destroyed by biological oxidation in
wastewater treatment plants.


Code 641

Industry - Possibility of destruction - incineration: This is the recommended method of destruction, especially
for large quantites. Closed system incinerators with
scrubbers should be used in compliance with local and
national regulations.


Code A663

Industry - Possibility of destruction - water purification: Trace quantites in water can be treated in secondary
biological WWTP before discharge to municipal treatment
works.

Industry - Possibility of destruction - other: No other recommended methods of disposal.

Public at large - Possibility of recovery/recycling: No applicable for the public at large.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable

Public at large - Possibility of destruction - incineration: Not applicable

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: Not applicable