[No public or meaningful name is available]

Guidance on Safe Use

First-aid measures

Emergency measure - Inhalation: Seek medical advice.

Emergency measure - Eyes: Seek medical attention.

Emergency measure - Skin: Seek medical attention.

Emergency measure - Ingestion: Seek medical attention urgently.

Fire-fighting measures

Recommended extinguishing agent: Dry chemical, foam, carbon dioxide or water spray.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes and hazardous decomposition

products (eg carbon and nitrogen oxides and sulfur, nitrogen

and chlorine-containing products). However, there is no

experimental evidence to support the anticipated combustion

products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards as

mentioned in section 2.3.00.

For large spillages, the preparation must not be released

into sewers, drains or wells. Absorb spillages of solutions

with a suitable inert material (eg sand or soil). Carefully

transfer the spillage to waste containers, or use a sealed

industrial vacuum machine. Containers filled with waste

material must be labelled in the same way as the original

containers.

For small amounts, wash away with plenty of water.

Clean the spillage area with water and detergent.

Dispose of waste material by incineration in accordance with

local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure by

inhalation, contact with the skin or eyes. Avoid rough

handling or dropping.

Engineering controls are necessary to reduce exposure to the

substance. Handle the substance within a totally enclosed

system or use always with local exhaust ventilation.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166

When necessary appropriate respiratory protection should be

used. e.g. a dust mask conforming to EN149 FFP1 or filter

respirator.

The standards mentioned above should be regarded as a

minimum.

Storage: Store in a cool, dark, dry and well-ventilated area away

from heat or sun light.

Keep containers upright and tightly closed when not in use.

Packaging of the substance and or preparation: The substance in the ink preparation will be packaged in a

tight plastic shell (ink cartridge). The size of the

cartridges varies from 5 to 100 ml.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Transport code: None.
Transport: The substance should be transported in conformity with any
local and national regulations.


Confirm that containers have no rent or leak before loading.
Protect containers against fall, drop and physical damage.

SpecialProvisions

Stability and reactivity

Danger other than fire: The substance may cause violent reaction with strong acids

or oxidisers.

High dust concentrations are irritating to the eyes, the

nose, the throat and the lungs and may caused coughing and

deleterious health effects such as inflammation of lungs and

infection of the bronchial passages. However, these effects

are not anticipated to occur as the substance is supplied

into the EU as a liquid preparation.

The substance is stable under normal temperature and

pressures.

Chemical reaction with water: None which is hazardous.

Dust explosion: Not anticipated as the substance is supplied as a liquid

preparation.

However, if environmental conditions are such that dust is

likely to occur, the recommended limits should be consulted

with regard to the permissible concentration levels of dust

in the air;

Japan Industrial Health Society (2000): Class 3, total dust

concentration 8 mg/m3.

ACGIH (1998): Other types of dust 10 mg / m3.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration. In principle, it may be

possible to recover larger spillages of uncontaminated

material for subsequent use.

Empty containers could be recycled in accordance with local

regulations.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is not

considered hazardous to human health and is not classified

as "dangerous for the environment" based on the results of

the Lenma growth inhibition test.

Industry - Possibility of destruction: controlled discharge: Empty containers and waste from printed documents may be

disposed of by landfill at an authorised tip in accordance

with local regulations.

Industry - Possibility of destruction - incineration: Solid waste of the substance should be disposed of by

incineration by burning under controlled conditions at a

licensed waste treatment processor in accordance with

national and local regulations. Incineration should take

place in an approved, controlled furnace with combustion gas

scrubbing and emission gas control.

Empty containers could be burn in accordance with local

regulations.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the

sewage system or the aqueous environment. Large spillaged

amounts of the substance must not be released into sewers,

drains or wells.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: It is possible for the public to recycle empty containers by

returning them to the supplier. Used printed documents

should be sent to recycling whenever possible.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Empty containers and waste from printed documents may be

disposed of by landfill at an authorised tip in accordance

with local regulations..

Public at large - Possibility of destruction - incineration: Not feasible.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.