Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
General advice : Call a physician : show him this safety data sheet
Inhalation : Remove to fresh air. If not breathing, perform artificial resuscitation. If breathing is difficult give oxygen. Refer patient to a physician
Skin contact : Rinse thoroughly with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes promptly and wash before reuse. In the event of any adverse effects, obtain appropriate medical attention.
Eye contact : Immediately flush eyes with plenty of water for at least 15 minutes. Hold eyelids open to ensure cleansing. In the event of persistent irritation, seek medical attention
Ingestion : Never give anything by mouth to an unconscious person. Wash out the mouth with water. If swallowed, do not induce vomiting. If vomiting occurs, keep airway clear. Call a physician.
Most important symptoms and effects, both acute and delayed /
Indication of any immediate medical attention and special treatment needed /

Fire-fighting measures

Extinguishing media
Suitable extinguishing media : pulverized water, carbonic anhydride, dry chemical powder or appropriate foam
Unsuitable extinguishing media : /
Special hazards arising from the substance or mixture
Thermal decomposition may produce carbon monoxide, carbon dioxide and hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for firefighting if necessary

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precaution : Wear a mask and gloves. Avoid contact with the product and ventilated the site. Wash contaminated clothing before reuse them.
Environmental precautions
Keep spill out of drains and prevent entry to surface water, groundwater and soil.
Methods and material for containment and cleaning up
Recovery : Pick up the product by suction. Collect the discovered product in a properly labeled emergency recipient for disposal.
Neutralisation : After complete collection, thoroughly wash the floors with a suitable self-emulsifying solvent or a dispersion in hot water containing detergent.
Disposal : Dispose in accordance with all applicable national and local environmental regulations and laws.

Handling and storage

Precautions for safe handling:
Technical measures : Does not require special technical measures
Precautions : Avoid contact with eyes or other mucous membranes. Wash thoroughly after handling. Do not permit eating, smoking or drinking in the vicinity. Ensure adequate ventilation.
Safe handling advice : Wash contaminated clothing and personal protection
Conditions for safe storage, including any incompatibilities:
Technical measures : Store at room temperature, out of sun, away from heat, sparks and flame
Storage conditions : Protect from light
Incompatible products : Combustible or flammable materials.
Packaging materials : Opaque packaging in Valethene® drum
Specific end use(s): Not applicable

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Regulatory exposure threshold limit value :
Does not contain any regulatory substance
Exposure controls
Appropriate engineering controls
See paragraph 7
Personal protective equipment
Respiratory protection : Appropriate mask with ABEK cartridge
Hand protection : Wear rubber gloves approved under standard EN374
Eye protection : Wear safety goggles or glasses with side shields approved under standard EN166
Skin and body protection : Minimize exposed skin with appropriate clothing (closed sleeves and collar, compatible safety shoes, etc)

Hygiene measures: Wash hands before breaks and immediately after handling the product. Handle according to good industrial hygiene practice
Environmental exposure controls
do not reject directly in the natural environment

Stability and reactivity

Reactivity : Product stable under conditions of use.
Chemical stability: Stable under ordinary storage and shipment conditions.
Light sensitive product
Possibility of hazardous reactions : /
Conditions to avoid: Flame, heat, sparks
Incompatible materials: Strong oxidant
Hazardous decomposition products : Thermal decomposition may produce carbon monoxide, carbon dioxide and hydrogen fluoride

Disposal considerations

Waste treatment methods: Dispose of by incineration in an approved incinerator in accordance with applicable waste disposal regulations.