Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Pay attention to self-protection.
Remove victims from hazardous area. Immediately remove soiled or soaked clothing and remove it to a safe distance. Keep victim warm, in a stabilized position and covered.
Do not leave victims unattended.
If the casualty is unconscious: Place the victim in the recovery position.

Inhalation is possible if aerosols, mists, dusts, or smoke form.
Move victims into fresh air.
With labored breathing: Provide with oxygen. Consult a doctor.
If the casualty is not breathing: Perform mouth-to-mouth resuscitation, notify emergency physician immediately.

Skin contact:
Wash off affected area immediately with plenty of water for at least 15 minutes.
If symptoms persist, consult a physician for treatment.

Eye contact:
With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.
In case of persistent discomfort: Consult an ophthalmologist.

Rinse mouth.
Immediately give large quantities of water to drink.
Obtain medical attention.

Most important symptoms and effects, both acute and delayed:
Symptoms: None known

Hazards: Other dangerous properties can not be excluded.

Indication of any immediate medical attention and special treatment needed:
This substance does not have any noteworthy noxious potential. Damage to health is thus not expected.

Fire-fighting measures

Extinguishing media:

Suitable extinguishing media: All extinguishing substances suitable.

Unsuitable extinguishing media: Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:
In the case of fire, the following hazardous smoke fumes may be produced: carbon monoxide, carbon dioxide, sulphur oxides.

Advice for firefighters:
Contaminated extinguishing water must be treated at a suitable disposal plant in accordance with waste management laws.
Water used to extinguish fire should not enter drainage systems, soil or stretches of water.
In case of fire, remove the endangered containers and bring to a safe place, if this can be done safely.
Use water spray to cool unopened containers.
Fire residues should be disposed of in accordance with the regulations.
Pay attention to self-protection.
Keep out unprotected persons.
In case of fire: full protective suit and wear a self contained respiratory apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Keep unauthorized persons away.
Avoid dust formation.

Environmental precautions:
Observe regulations on prevention of water pollution (check, dam up, cover up).
Do not allow entrance in sewage water, soil, stretches of water, drainage systems, surface water.
If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and material for containment and cleaning up:
Pick up mechanically. Collect in suitable containers.
Avoid dust formation.
To absorb spilled substance an approved industrial vacuum cleaner is recommended. If necessary, the spilled substance should be moistened.
Pack and label wastes like the pure substance. Do not detach label from the delivery containers prior to disposal.
Disposal according to local authority regulations.
Clean contaminated surface thoroughly.
Avoid excessive dust generation.

Handling and storage

Precautions for safe handling:
Avoid dust formation.
Do not inhale dusts.
Avoid contact with skin, eyes and clothing.
Take precautionary measures against static discharges.
Always close container tightly after removal of product.
Avoid residues of the product on the containers.

Conditions for safe storage, including any incompatibilities:
Advice on protection against fire and explosion
Keep away from combustion sources such as sparks, flames and unprotected light sources.
When using do not smoke.
Take precautionary measures against static charges, keep away from sources of ignition.

Store in the original receptacle, keeping this tightly sealed, under cool and dry conditions.
Observe prohibition against storing together!

Further information:
Protect from sunlight, warmth and heat.
In order to ensure due transportation, make certain that stacks are of the correct height, containers are securely fastened so as not to fall off, and labelled according to the regulations.
In the event of internal transportation, already-opened containers are to be kept closed in order to avoid spillage.

German storage class:
11 - Combustible Solids

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Not dangerous according to transport regulations.

Inland waterway transport (ADN(R))

Shippingopen allclose all
Not dangerous according to transport regulations.

Marine transport (IMDG)

Not dangerous according to transport regulations.

Air transport ICAO/IATA

Not dangerous according to transport regulations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:
Other information:
Contains no substances with occupational exposure limit values.

DNEL/DMEL values:
Remarks: No substance-related safety assessment is necessary / has been conducted for this product.

PNEC values:
Remarks: No substance-related safety assessment is necessary / has been conducted for this product.

Exposure controls:
Engineering measures:
Ensure suitable suction/aeration at the work place and with operational machinery.
Provide for installation of emergency shower and eye bath.
Take precautionary measures against static discharges.

Personal protective equipment:
Respiratory protection:
When handling for a short time:
In case of occurrence of inhalable dusts and suspended matter: half mask with particle filter P3

in the event of prolonged exposure during handling:
In the case of respirable dust, use self-contained breathing apparatus.
Note time limit for wearing respiratory protective equipment.

Hand protection:
Applies to handling for brief periods or of small amounts
Glove material Nitrile
Material thickness: 0.11 mm
Method: DIN EN 374

Applies to handling for longer periods or of large amounts
Glove material Nitrile/Chloroprene
Material thickness: 0.65 mm
Method: DIN EN 374

Selection of protective gloves to meet the requirements of specific workplaces.
Suitability for specific workplaces should be clarified with protective glove manufacturers.
The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by
analogy with similar materials.
Remember that the useful time per day of a chemical protection glove may be much shorter than the permeation time determined
according to EN 374 due to the many different influential factors involved (e.g. temperature).

Eye protection:
Safety glasses with side-shields conforming to EN166
If dust occurs: basket-shaped glasses

Skin and body protection:
Select materials and equipment for physical protection depending on the concentration and volume of hazardous substances and the workplace involved.

Hygiene measures:
Remove and wash contaminated clothing before re-use.
Do not eat, drink, smoke, or sniff while at work. Wash your hands and/or face before breaks and before termination of work.
Preventive skin protection is recommended.

Protective measures:
Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes and clothing.
If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used.
The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).
It should be defined in the work place in the form of a risk analysis according to directive 89/686/EEC and amendments.

Stability and reactivity

Reactivity: No further information available

Chemical stability: Stable under recommended storage conditions.

Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.

Conditions to avoid: sun rays, heat, heat effect

Incompatible materials: Bases

Hazardous decomposition products:
Decomposition products in combustion and thermal decomposition:
Carbon monoxide
Carbon dioxide (CO2)
Sulphur oxides

Disposal considerations

Waste treatment methods:
Disposal according to local authority regulations.
Pack and label wastes like the pure substance. Do not detach label from the delivery containers prior to disposal.

Uncleaned packaging:
Do not reuse empty containers and dispose of in accordance with the regulations issued by the appropriate local authorities.

Waste Key Number:
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.